How To: Break in a New Clutch & Flywheel / Seating Friction Surfaces (Scion tC / tC2 / tC2.5)

🛒 Product link(s) at bottom of video description.
Here's how I broke in my new clutch to maximize it's life and performance. Also, first gen (2005-2010) and second gen (2011-2016) tC's use the same clutches and flywheels.
🛒Exedy TYK1507 OE Clutch: amzn.to/30yL8hG
🛒Competition Clutch 2-725-ST Flywheel (12 lb): amzn.to/2OKMN0U
🛒Clutch Masters FW-725-SF Flywheel (14 lb): amzn.to/3rDbZVI
🛒 Headrest Camera Mount: amzn.to/38u936j
🛒 Dashboard Phone Mount: amzn.to/3bCnFmj
☕ If you find this helpful, you can buy me a coffee at ko-fi.com/vamp....

[@TheKingOnly4]

Honestly thanks for small videos like this, these help me explain to my brother and others on the different things that Manual transmission go through.

[@VampyreX13]

I've been trying to keep them short and concise as possible. I was just reviewing the length of my videos when you commented.

[@retrographics6759]

I'm convinced most early transmission problems were because of hard test drives in their early stages.

[@sebbi2988]

i thought the break in period was 300 miles and i gave the car full gas about 6-9 times and did not notice any slip or clutch smell after around 300 miles, do you think my clutch is ruined?

[@VampyreX13]

It depends on the manufacturer and the type of clutch, but 500 is the general break n time. Some clutches (stock) are fine with only 300 miles.

[@sajidkhanmahmood]

ive just had my clutch changed at a local garage the car feels so nice now but they did not mention anything about break in at all.

[@VampyreX13]

That's surprising. I already knew about breaking in the clutch before I had mine changed, but my shop even instructed me on the process as well when I picked up the car.

[@sajidkhanmahmood]

@@VampyreX13 i went to a back street garage where i got it done the cheapest since the car is already written off and bought back i did not want to spend too much on repairs. Anyhow i did break it in nicely until 500miles and it is driving very well now.

[@VampyreX13]

@@sajidkhanmahmood fantastic. I was worried you may have seen my video too late. Glad you got it working and driving well.

[@sajidkhanmahmood]

@@VampyreX13 I did actually find out about the break in thing because i was watching videos on clutches being changed on youtube and it was mentioned there so i had worked it out before i drove my car away. Also i think they were supposed to machine the flywheel or something but they never did that either and im not sure they torque tightened some nuts etc still get what you pay for i guess

[@Laogai001]

Same here.

[@insaneali4280]

Hey Derek besides the audible noise, do you think keeping that OEM bearing is damaging the car? I've been driving on it for around 30,000 miles since i've owned the car. Total mileage is around 90,000

[@VampyreX13]

I've seen a couple of pictures with a failed input shaft bearing that basically blew apart and caused damage.

[@Trenchboi69]

He don’t know he didn’t fix it lol jk not nice

[@Wes_5kyph1]

I had clutch assembly/flywheel replaced on a tc2 a few days ago. There seems to be more all-around noise than before, quick clashing metal sound on startup. Then generally louder as engine runs despite driving and shifting being ok. Last night the car would not start, lights worked (batter/alternator: new). Perhaps clutch pedal wasn't engaging starter or starter was not engaging flywheel? I took a shot in the dark and disconnected and reconnected the battery. Somehow this worked and the car started up. Does this sound most likely like a faulty flywheel install? I will bring the car back and hopefully they'll fix the issue without asking for more money. I was hoping most of this noise, etc would go away during the break-in period, but it's been 200 miles and unless I'm exaggerating it's probably best to bring the car back sooner than later. Any thoughts? Thank you.

[@WaseemKhan-gc3mn]

Hi , did you find out what the issue was , my car is doing the same flywheel noises when in neautral

[@Wes_5kyph1]

@@WaseemKhan-gc3mn i just replaced the transmission and everything was perfect

[@salvadorruiz3996]

Looking into this flywheel to add it with my ACT kit.. What's your opinion on the flywheel after breaking your clutch in?

[@VampyreX13]

I love it. The engine revs faster and the car definitley accelerates a little quicker. I didn't really notice any momentum loss, or I adjusted to it quickly. I'm glad I stuck with the slightly lighter steel flywheel vs. a very light aluminum one. I also still have my lightened crank pulley installed.

[@salvadorruiz3996]

@@VampyreX13 Nice that's awesome and so sorry for the 21 questions but do you still get that flywheel rattle like it's a diesel?

[@VampyreX13]

@@salvadorruiz3996 no rattles.

[@salvadorruiz3996]

@@VampyreX13 That's perfect thanks bro looks like I found the perfect Flywheel for my ACT kit

[@d0cx]

Derrick, have you ever heard of anyone doing an automatic to manual swap on a tC2?

[@VampyreX13]

Yes, someone on my Channel posted about doing a swap with their tC. I've done it before with my old Corolla.

[@ratata2315]

Derrick by any chance are u located in FL? Man I'm trying to get this job done in my Eb60 transmission that is already out and no shop in FL so far is willing to help or do the job ? I want to resolve the input shaft bearing just because the trans is down already so I don't have to deal with that in the future. Thanks in advance and thanks for the content

[@VampyreX13]

No, I'm up in Maryland and I paid a shop to handle the task. Ask around on the Facebook groups. I know there's a few tC owners all around that have done it themselves. Maybe there's one near you.

[@jessejames1444]

How do you know if the flywheel is compatible with the clutch? I have an 05 that I'm going to be ordering a staged clutch in.

[@VampyreX13]

Go to the manufacturers website and put in your car's info to find the model you need. As long as the clutch and the flywheel are both for your car, they should work together.

[@ultramuygnarly]

2012 rs7.0 owner, noticed a ticking noise with my clutch when transitioning between my clutch pedal and accelerator while in 1st (from full stop) and while down shifting from 3rd into 2nd gear when making right turns on street corners. I had my entire transmission and clutch replaced Thanksgiving of 2022 and the noise is intermittent (every time I attempt to have my mechanic try and replicate the issue/sound - no replication) any idea what this could be? I am worried I am putting unnecessary stress on my clutch.

[@VampyreX13]

Unfortunately, I'm not familiar with that particular symptom, just the whining noise issue that occurs when depressing the clutch pedal (throw out bearing) vs. the whining noise when the clutch is engaged (input shaft bearing). Have you tried driving it around with the mechanic to see if you can duplicate it for them to hear, instead of letting them drive it around?

[@ultramuygnarly]

@@VampyreX13 Thank you for your response! I have had my mechanic sit in the passenger seat while driving (no replication of sound) - it is an OEM clutch kit, if possible, what adjustments can be made to a clutch kit?

[@VampyreX13]

@ultramuygnarly transmissions are a little outside of my wheelhouse. I usually have my mechanic friend look at mine when it has problems. That being said, does your noise happen when you first start driving in the morning, or does it start happening once the transmission and gear oil has warmed up? If it only happens in the morning, then you may need to leave it overnight with your mechanic so that he can let everything cool down and then test drive it. Also, what gear oil are you using? I recommend amzn.to/3UbDSW8.

[@ultramuygnarly]

@@VampyreX13 typically, symptoms are intermittent (most notably during initial start-up/driving) I will do that and inquire about the gear oil you mentioned.

[@luigi3286]

Hi Derrick , I have the same car , I’ve been looking at the type the light flywheel that you put in your scion , is that flywheel too light ? There’s many lightweight flywheels out there with different weights, is your too light ? I have heard that people have to get used to those flywheels, Any advice from you if someone decides to get one for the scion ? Thanks

[@VampyreX13]

I'm using the 14 lb steel flywheel (corrected), which I have linked in the video description. I'm really happy with it and didn't have any issues getting adjusted to the lighter weight. I wouldn't want to go any lighter since I also have a lightweight crank pulley.

[@luigi3286]

Hi Derrick , but in the video you said that you’re using the one that has 14 lb I’m confused 😕

[@VampyreX13]

@@luigi3286 sorry, you're right. Been a long day. I'm using 14 lbs because I also have a lightweight crank pulley installed, which is why I wouldn't want to go lighter. As long as you are still using the stock pulley, then I would recommend the 12 lb one.

[@luigi3286]

@@VampyreX13 thank you so much Derrick I really appreciate it happy holidays 🙋🏻‍♂️

[@VampyreX13]

@luigi3286 thanks, and you as well.

[@theconfused_fisherman]

Anyone know how much it costs to have the trans rebuilt? Mine is having some syncro issues with 3rd and any time i let the clutch out while in neutral it makes a low groaning noise which i would assume is input shaft bearing

[@VampyreX13]

You need to call around and check as I got quotes starting at $900 at a mom and pop shop to $1700+ at chain shop. I went with a transmission specialist which was charging $124.50/hr. I don't recall the total cost off the top of my head though.

[@its8bpm554]

I got mine rebuilt for $1300

[@arctictruck10]

What stereo unit do you have? Stock?

[@VampyreX13]

Yep, I'm still rocking the stock radio. I do everything through my phone anyway and I already have a digital signal processor installed under my seat.

[@zedtrix3567]

why did you rebuild your gearbox?

[@VampyreX13]

Aside from the rear input shaft bearing failing, the 3rd gear synchros and both differential bearings were worn out.

[@turtlesautoadventures6922]

Sadly my motor just blew on mine

[@VampyreX13]

I'm so sorry to hear. Are you rebuilding it?

[@Gantz0302]

Why not s lightweight flywheel?

[@VampyreX13]

I did put a lightweight flywheel. It's a 14lb one.

[@Gantz0302]

@@VampyreX13 why not an 11.4lb flywheel. Its what i have on my tc

[@VampyreX13]

@@Gantz0302 I wanted to stick with a steel flywheel. I also didn't want to go too light because I already have a lightweight pulley on the car.

[@luigi3286]

@@Gantz0302 hi I have a 2014 scion tc , I have a question, how does the car runs with 11 lb flywheel ? I have heard that that if it’s too light the rpm goes down so quick ,, what is your opinion or advice? Thanks

[@Gantz0302]

@@luigi3286 it runs fine, but my set up is different, along with the lightweight flywheel im also running a six putt sprung clutch with an stage3 pressure plate. Abit over kill but I learned my lesson and had to change all of that so my differential pinn wouldn’t blow out the casing…again. But hey thats cars you break you gotta fix them to be better

[@qmcnetwork]

Hey Derrick how much did it cost?

[@VampyreX13]

It was installed as part of rebuilding my transmission, but when I was calling for quotes to install them, I got prices between 900 and 1700 from the various shops I called.

[@qmcnetwork]

@@VampyreX13 What did they change when rebuilding the trans? And how much did that costed if you don't mind me asking. Thanks for answering and keep up the great videos!! :)

[@VampyreX13]

@@qmcnetwork I'll try to track down the invoice this week, but all the seals, bearings, and 3rd gear synchro off the top my head.

[@qmcnetwork]

@@VampyreX13 Thank you ! Truly appreciated.

[@cwreck1814]

What phone mount is that?

[@VampyreX13]

It's in the video description. It didn't come with the actual clip for holding my cell phone, but I already had one from my tripod.

[@VampyreX13]

Oh wait, you mean the one on my dash and not the one holding my camera. It's amzn.to/3l5RqyK. I just added it to the video description.

[@cwreck1814]

@@VampyreX13 sweet thanks