How to Buff and Wax Gelcoat on Boat or Yacht Heavy Oxidation

[@captlarry-3525]

don't forget the Sea Shield Wallet Extractor Interface.. available at the counter.

[@pjbottoms8095]

Capt Larry - LMAO

[@grampagamingguy6833]

NOICE!

[@youtubechangedmyname]

Nailed it 😂

[@CanadianCaymanRS]

Hahaha

[@ryanr9260]

Capt Larry - 😂

[@abrahamshadbeh7223]

Empty your entire bank account first, then apply product quickly and evenly, take 2nd mortgage on home, again apply thinly but evenly, after doing said procedures, reapply with personal loan from friends and family, this time go heavy with product, apply thinly and evenly. Skip your kids birthday and wifes anniversary, take grandma to bank, empty as needed, reapply product if oxidation persists. Continue as needed. Repeat all steps.

[@jaycee1373]

Abraham Shadbeh 🤣 and it all starts with the purchase of a boat.

[@juanlondono7989]

You are too funny lol

[@darrenleach7967]

My god I’ve never seen so many products for one job

[@SeaShieldVideos]

Darren, that’s is to a extremely oxidize Gelcoat that most be wet sand and compound. 80% of the boat can be compound, Polish and wax. For medium to medium heavy oxidation Cut &Polish #2 + Swirl Remover #3 fallow by protective wax. Very simple. There is not shortcuts to a great finish on Gelcoat.

[@rx7dude2006]

I agree I have been detailing yachts for 20 years and this is actually a great step by step video and all the steps are really needed to get a great finish.

[@Local_Boydidgood]

Absolutely. Sell much? I've seen a few boats that need wet sanding but I've never done it nor will I endorse it. It's a waste of time at that point unless you're flipping a boat and screwing the next owner. I put my skills with what I use (basically store-bought stuff) against all this.

[@BMWorner]

@@Local_Boydidgood I’m now dumber from reading your reply

[@frandanco6289]

@@BMWorner Perhaps you were dumber to begin with??? Yeah, that's it...

[@jonjaramillo629]

She sells Sea Shield by the seashore.

[@daledow2278]

lol... wut did yu thay?

[@strobaholic]

Jon Jaramillo She sells Sea Shield at the sea shore Sea Shield store.

[@benji_tube]

"Use Sea Shield water to lubricate the the surface"

[@vmonroig21]

it nano tho

[@DerekSpeareDSD]

and a Sea Shield hose...

[@dave216dx]

@@DerekSpeareDSD 😂😂

[@TineyGrouse]

Honestly I work in a body shop and I paint and buff shit for a living. The miracles I get away with, without the use of all those damn pads is a life saver, you dont need half of that crap to get the same results! I promise you. Less is more and never let your pad get to dry, squirt bottles are your friends

[@SeaShieldVideos]

I agree on most gelcoat boat you are able to cut with a Medium Compound like our Cut and Polish #2. This video was done on a extremely oxidize gelcoat. Sanding was required and most skill paint correction can get same result white wool. Keep in mind car clear coat is much softer than gelcoat.

[@Cheepchipsable]

Paint isn't the same as gelcoat. To get a really good finish on gelcoat does require a lot of work. You can do an average job quickly, which impresses most people, ( a lot like paint work). You can get a good looking finish on car paint...then hide stuff with a good wax. Problem is how long does that finish last?

[@mysterymachine9843]

Yep he's just made a job 10x more longer and expensive 😂😂

[@jfishmento4147]

So between the tools and Sea shield it's gonna cost like 2 grand to buff out my boat . Thanks Sea Shield! 👍

[@jaysparc]

Warning: not using a Sea Shield product may result in a steak dinner for you and a loved one.

[@rosconole]

nice job slinging the product all over the area !

[@pinkfishplumbing3960]

Don't forget to buy sea shield oxygen and sea shield respiratory masks along with sea shield protective gloves when applying your thirty sea shield products that cost more than your boat

[@henrycurrier6266]

Looks like I’m gunna need a sea shield lottery ticket to

[@hollywoodswngr]

Hey- based on the quality look of that shine I get the need for time and product. If it lasts, despite the requirement, still alot better than repainting or paying big $ to have some one else do it.

[@bryankirkham8249]

Wouldn’t it be cheaper to just get it re-painted?

[@grapesoda4908]

Do they sell Lake Shield Products also!!

[@mattphillips9107]

Wow this makes halfords look cheap! What did it look like after 6 months?

[@grapesoda4908]

Was that Sea Sheild water in the spray bottle as well just wondering? I have to make sure I do it right

[@davidjosephjohn8599]

Don't be an idiot. Buy 2 Meguirs products and save the rest of your money for your kids college tuition.

[@skuzzy99]

Why would you wet sand with finer than 1500? Any good cutting compound should handle even a 1000 prepped surface.

[@RectifiedMetals]

You forgot to sell us a sea shield buffer. Did Makita pay for you to show their tool?

[@langisbad]

how many times does he say Sea Shield?

[@ryanh0190]

Do you think this is sponsored by seashield

[@Cheepchipsable]

Maybe the name of the channel gives it away?

[@michaelslawinski1821]

You forgot the sea shield tape to tape off those delicate areas! Lmao.

[@MessianicJudaism]

stupid question - will this work on rv gel coat as well?

[@SeaShieldVideos]

Yes it will. You have to determine in what step to start. It all depends of condition of the gelcoat and age.

[@gordonetgate]

Its easier to buy a New boat

[@rawdronefree1978]

Or, just keep beating up the one you have and pretend life is short.

[@johndiekmann]

A little more expensive though

[@jonathanravelo2263]

Lmao

[@mongie1853]

it looks like an ad for sea sheild. What about in the rest of the world?????

[@chrislane5670]

man looks like a ton of work if your boat is large!! Must be an easier way!

[@SeaShieldVideos]

Chris most of the time we boats in lat less steps. This panels where extreme oxidation 1000 grit sand paper was not doing anything. Most oxidize boats you can either start Sea-Shield Cut and Polish #2 or Medium Compound fallow by Sea-Shield Final Polish. Basically in 2 steps plus the final Polymer Sealant Call [phone] if you need help evaluating your surface.

[@chrislane5670]

@@SeaShieldVideos Clearly your product is amazing but for a 60' boat ~ too many steps for me.. Great vid though.

[@SeaShieldVideos]

Is really not that big for it. You can do it in one step if you really like. We do 200’ + with Sea-Shield. instagram.com/p/B9F3dOeIj_S/?igshid=19d4ro44nj8a3

[@tonyjaquez3595]

@@SeaShieldVideos how long did it take to do that 65M yacht? That's pretty impressive.

[@gregoryspicer1555]

The polish job costs more than I paid for the boat. But is sure looks nice.

[@thomastirolflorida5363]

and in just less than a year, boat looks like bew again. Or use #M marine restorer and wax for an afternoon.

[@michaelbaluja232]

Might as well just pay someone to do it for you if your going to have to buy all that. Jeez

[@SeaShieldVideos]

Michael you may only need the Cut & Polish #2 and Swirl Remover #3 and final Protection. For most medium to heavy oxidation. The example in the video is extrema oxidation where wet sand our the Heavy Cut #1 is needed.

[@vmonroig21]

just get it repainted

[@Eddie510s]

vanessa M LMFAOOOOOOOOOOO seriously

[@frandanco6289]

@@vmonroig21 lady - it's a boat.. Gelcoat...

[@strobaholic]

Do y’all make a product named “wallet shield” ?!? 🤦‍♂️

[@SeaShieldVideos]

You can do this a lot cheaper. It will always depends of the step. You can potentially do this in 2 steps- #1 or #2 strait to our cleaner wax. If price is what you are concern that is our cheaper option...

[@landonjames9416]

Nice tutorial

[@georgert]

I could buy a new boat for the cost of all the jams, jellies and power tools prescribed.

[@SeaShieldVideos]

You can get all the require products to do a small boat for less than 200.00 if you have the tools. You can skip a few steps if perfect finish is not your priority.

[@tonyg1963]

Cheaper than a full repaint

[@mr.ramirez3025]

tonyg1963 you haven't been to west marine lol

[@sportscarclinic]

Gelcoat isn't paint.

[@edgardosalas2236]

this product let your wallet clean and shining too 😁😁

[@Local_Boydidgood]

Tell me that guy... Tell me it was his 1st day on the job and I won't question the products or results too harshly. Too late, I just got to the end. If this is what your company thinks is an example of good perfecting of gelcoat then I can hardly trust that you know anything about yachts, boats or skiffs regarding shine potential and longevity. Credibility = 0

[@MessianicJudaism]

I have an RV, I'm looking for products to make the gel coat pop like what I saw in this video. What would you recommend? I need something that has quality UV protection. Thanks.

[@scottomalley3948]

@@MessianicJudaism little late to the party here, but go to your local Autozone and grab a bottle of the 3M Machine Polish near the paint. Will remove 2000 grit sanding marks at high speed, and has a nice finish on speed settings 1-3. Grab some automotive SEALANT (try Adam's or Chemical Guys) and you'll have great UV protection for the next 6 months.

[@Local_Boydidgood]

@@MessianicJudaism sorry I didn't see this earlier. 3m marine products are great for RV gelcoat. Meguiar's Flagship would be a great choice.

[@davidandersen9186]

and for $3000 this can all be yours....

[@larrymorgan2635]

Yeah....no.

[@chrissimon8403]

HOW MUCH MONEY DO YOU WANT PEOPLE TO SPEND??

[@pkonyoutube]

Too many steps and products...pass

[@6ft8BigJay]

Too many products

[@AKSnowbat907]

may be cheaper to just buy a new boat....

[@TallStarlite]

Too many products to do one job. No thanks!

[@SeaShieldVideos]

Most of the time you only need a wool pad + Cut & Polish #2. For better finishing fallow with Swirl Remover #3. Then the final protection wax like Exhaust Guard Synthetic Wax. This is the basic steps for a oxidize gelcoat restoration.

[@jonredd650]

Sweet baby Jesus better off repainting

[@guglielmodicarlo4139]

anything else needed?? LOL

[@bubasnip]

5-6 steps, ya dreaming, talk about trying to upsell a product.

[@VENETIS-MAINTENANCE]

The only things it needs is grinding with 1000-2000-3000 and check if has deep scratces then u apply fast cut 1 OR if ologram exist The number 2.NOTHING else. Sea shieldfantastic money spender.

[@guglielmodicarlo4139]

this is the most ridiculous how to video on you tube, might as well just paint the boat,,,,,, with that thats going to cost, parts and labor, thats about right

[@SeaShieldVideos]

Most boats are not as dull and oxidized as the sample panel. The majority of boars can be started with Cut and Polish #2 and New Final Polish for best finish. Also you should with your local shipyard a quote for a new paint job. You may be surprise the real price to paint a boat… much more than you think.