3 Hacks for Rotary Polishing!

Welcome to Marine Detail Supply - Tampa Bay!
In today's video, we go over 3 different ways to use a rotary polisher!
01:27 - Basic Compounding
04:56 - Hybrid Pad
10:14 - Polishing Pad
Purchase Your Supplies!
DeWalt DWP849X 7”/9” Variable Speed Rotary Polisher: marinedetailsu...
7.5" x 2" Lake Country Single Sided Wool Cutting Pad: marinedetailsu...
Lake Country 148mm (5-7/8") D-A Backing Plate: marinedetailsu...
Starke Level R Heavy Cut Compound: marinedetailsu...
Starke Elevate Medium Cut Compound: marinedetailsu...
Starke Restructure Heavy Cut Compound: marinedetailsu...
Starke Ignition Finishing Polish: marinedetailsu...
Lake Country HD Blue SYN Wool: marinedetailsu...
Presta Double Sided Pad: marinedetailsu...

[@balazsforis4095]

An no you can't use a foam pad as others had suggested lol. You are spot on!. Single sided pads are also better. Otherwise you need a bunch of attachments. You are correct. Learned alot. Thank you. Much appreciated

[@garycunningham8972]

I’ve in automotive paint for 25 yrs and you are 💯 correct it’s all in technic and the correct pads & compounds no mater what your buffing !!!!!! Excellent technique and video love it!!!!!!

[@jasontouzell2155]

I usually spray the compound with water and find it makes it more fine each time it’s hydrated. In my experience only works best starting with a medium cutting compound. Saves having to use a 2nd product to polish. Not the text book procedure but works

[@terrywadkins2439]

Huge help explaining why I was experiencing the problems and poor results I was having and how to do it right. Thank you!!!

[@BushcraftJackk]

😮😅

[@cameronslack9807]

Just started compounding and polishing a 45ft hull mould. The first day I started I had no technique what so ever and it looked bad, but today was a success I was really pleased with how it came out.

[@danieljosealfonzobarrera2805]

Hi from Bolivia, nice to meet you, thanks for this video, in my job they are using 3M PERFECT IT with the same machine DEWALT, so, very important to do low rpm, I confirm that works. Thanks

[@thebrushhawg]

I detailed cars in the early 90’s and rotary is all we had. I just bought a forced rotation to do a boat for a buddy. It is a game changer for polishing but i had to use the old Mikita to compound with.

[@zakn3954]

I like how you did the intro after you polished it out. Backs up what you are saying and makes for a good intro.

[@ChrisG-vq7ld]

I have that machine too, and it absolutely wears you out. It’s like trying to hold onto an excited 30 lb tuna after a while

[@johnpringle5842]

Was a young detailer at the detail dock in st Pete in the 90’s. That’s all we used 🤙🏴‍☠️🤟

[@WhyWhatWhoWhenWhyAgain]

Great video, thanks for making it and putting it up for us. Really liked the tips on what not to do, cause im guessing you've watched enough kids get in the shop or "that new guy" and fight the tools, fight the method, and fight what you are telling them to do. I find a "what not to do" tip can get as much or even more mileage than a "how exactly to do" tip. Cause im going to try and do things in weird ways before i finally realize that the guy who showed me what to do had reasons for doing things exactly as hes doing those things. Why not to is a gift to us noobs. Thanks friend.

[@chriscaarnold]

Thanks from the UK, on a super-yacht, in the Maldives

[@marinedetailsupplyco.-tamp3457]

That’s awesome how’s the weather over there?

[@balazsforis4095]

Amazing. You are the best!! Thank you.

[@robwyers5306]

Just got my huge order of your stuff in and I start my first buff job with your system (including Stark) tomorrow; stay tuned…

[@captaindrops3142]

Thank you sir. Well explained. Im about to order a new trigger handle on my DeWalt rotary. Dropped it while repairing power cord.thanks again for the lesson. 💪👍🍻

[@dirtyrebel884]

Ive been doin boats for 5 years I learned to start and finish with a rotary. I completely agree with everything you did in this video except when i cut i run around 2600 rpms

[@Rob-h7i1z]

Slow it down! 2500rpms and above will get your rotary buffer confiscated 😮

[@bobt659]

You know your stuff I'll give you that. Thank you for the video .

[@jameseberstein]

Thanks for the helpful hints and products information and pricing 🙂.

[@antoniskonstantakis5474]

I think the rotary is the best of all

[@rperezcorona]

I like the idea of only using a rotor and wool pads. Which pad would you use to seal/finish?

[@Solobolo_101]

Watching this video After coming home From doing a 32 Footer .. Wish I had seen this video before ..

[@Greg_P611]

Do you guys ever do in person training seminars?

[@davidsargent9641]

You mentioned applying a sealant right at the end of this but did not include details. What product did you use?

[@ElevateYacht]

Great info here! The videos have been great, keep em coming!

[@ElevateYacht]

@@marinedetailsupplyco.-tamp3457 #collaboration time 🤔

[@gachapotato4460]

Good video. Lots of valuable info

[@Dggb2345]

Attribution to your mentor 👍

[@CRYANZ]

Nice job

[@guojie3360]

What's the max speed you would go during yacht compounding, polishing, waxing?

[@dublove9405]

Is that extender behind your backing plate useful?

[@rodneyemmerich8828]

Great video and advice 👍

[@johnpivovarnik9678]

What people don’t know is the rotary used to be the only machine out there .

[@paulgaylor7394]

Great Video, What’s the best way to just get ready to go in water? Use Elevate in spots that are bad, or do you need to do the entire hull? Then use the Finishing polish?

[@JohnFlath]

I have a Cris craft launch and only a small section on each side of the boat is oxidizing. Can I simply compound the oxidized areas and then go back over everything with polish then wax? Thanks!

[@themobileboatguys6186]

Nice video and channel 💪

[@Local_Boydidgood]

1st, you're (everyone using one) welcome for the 849x. 2nd, nice vid. I never worry about people understanding the little stuff. Even with 3M's Heavy Cut, you can get a swirl-free finish. I've seen it with Super-Duty too but only once. Good stuff.

[@jamesjannell8706]

Great stuff. Enjoy your content. Can I get the same results with my ,6" mashing da ?? Thx a bunch.

[@jamesjannell8706]

MaxShine machine

[@willbeck5280]

love how Conrad had time to show you and not his employees that wanted to learn, let 2 people work for 2 weeks then didnt pay them me being 1 of them

[@willbeck5280]

@@marinedetailsupplyco.-tamp3457 Thank you, I will let my boss know i have a detailer in the Tampa area that may be able to help our new boat customers if needed.

[@lornejanes6001]

Would have like to see him more clearly match up which product he used with which pad. Thank you

[@WhyWhatWhoWhenWhyAgain]

Shoulda just watched the video. Or someone else's

[@ShawnTalbot]

Is it possible to get the same finish result with the Lake Country purple pad instead of the Presta blue blend?

[@VERAD0]

Hey great video. Will these starke products in that order be good for a Boston whaler (white) hull or just a colored hull?

[@VERAD0]

@@marinedetailsupplyco.-tamp3457 I didn’t order anything yet, I’m referring to what was used in the video.

[@bobadingo]

Polishing lightweight small parts is impossible with a random orbital , so rotary is the only way to go using 3 inch up to 5 in pads and I'm referring to Automotive two stage & single-stage paints. As a matter of fact I don't like DA's regardless due to the high vibration caused by various weights of different pads or else you have to change counterbalances which induces more work. so rotary truly is the best all-around polishing machine.. .

[@Nextlevelmarine]

Will that blue wool fully remove Swirls and halos on black gelcoat?

[@LordDarthBaiter]

I'm old and my back aches so I tie my polisher to my t top with a bungee cord. That way I let the bungee hold the machine up and I push it down and let the b8ngee pull it back up. 👍👍👍

[@seacoastdetailing4081]

I really dig that hat

[@sega2229]

I been using a rotary and offering buff and wax using a product with compound and finishing material and I haven’t gotten much swirls or holograms it’s very little but I thought that was all I had to do to make a boat shine like crazy guess I was wrong

[@I-AM-DaNiEL43]

Well I you have gotten the boat gelcoat to really shine/mirror like.. you Are doing it right!.. I been using rotary with white wool & yellow wool pads.. & Maguires 1step compound +polish in 1+.. ( problem is my Rotary buffer is lil old & doesn't have rpm settings!.. so I manage by depending on how bad oxidation is /age/roughness & color.. & I been detailing for years.. every single boat is always different on how /what I attempt to use.. recently I realized so.e bad errors on my end that kept leaving color/oil/polish>wax blotches/ etc.. frustrating the hell out of me.. then I couldn't believe what I was causing these errors from.. when I cleaned boat I used Boat wash mixed with Dawn soap 🧼.. the Mistake was boat wash had carnuba wax in it!.. 😮 .. This caused such issues.. because when you are using Gelcoat paint cleaners/Compound/ & polish .. You need the surface to be completely Cleaned of Any oils/Waxes /oils etc.. ya want a Very clean Surface (Preped) at all times when you are doing EACH STEP*.. SO VERY CLEAN DRY SURFACE.. FOR WHEN EACH STEP IS BEING APPLIED.. YES.. wipe>clean compound & polish aftwrwards.. crucial!.. Before you apply the final sealant> protectant like( Ceramic/ Wax/etc).. these steps are missed so many times, & we wonder why does it look blotchy or weird?.. .. In your case sounds like you had it right!.. Only thing else ya have to do.. is reclean/ or Prep clean (spray) wipe off & final step is.. The protectant of your choosing!.. Carnuba or Teflon wax or Ceramic glide coat/ or other sealants! .. If boat is Reflections shiny clean.. then the Protectant of your choice would now go on with such ease & wipe off.. Everyone has thier own methods.. this dude has alot of experience & does alot of cool creative steps.. me I like to cut corners but with shooting for exact same results!..

[@dsktsunami]

Great video

[@AdmiralGlascock]

What do you recommend for removal of hard water spots on a 3 year old boat?

[@marinedetailsupplyco.-tamp3457]

You can try the venom water spot remover if the doesn't work you may have to compound them off!

[@davidrazo5543]

Where you get the extension spacer for the machine

[@dtail4u]

Can you use elevate on clearcoat also?

[@scottparkes7563]

How often do you clean the pad on one job ?

[@holdenbaldassi3697]

Whenever it stops cutting. Foam pads will start to grip the boat as they get clogged up and wool pads will start to cut too deep. Listen for a rattling noise from your wool pad when you clean it with a spur.

[@user-in8xx1xu5b]

Idk why the machine flopping made me laugh lol

[@intrinsicfineautofinishing4660]

what speed are you working on the finishing pad?

[@Local_Boydidgood]

When using a Single-sided pad, you can remove the extending spindle nut, you'll have way more control over your machine (I designed) with a lower center of gravity. Without catching the sun's reflection on that black, how can I see if it's swirl-free? Next video option? kzbin.info/www/bejne/aZ2ZgGlvlKena7c

[@revival2604]

Great video Michael. Just want to ask you something. I want to polish an epoxy resin table top with a rotary polisher same as the dewalt. Since the gelcoat is a resin, if I have sanded the resin up to 4000 or more can I skip the first step with the wool pad and the medium cut compound and move on to the following steps?

[@revival2604]

@@marinedetailsupplyco.-tamp3457 Thank you for your answer. I will let you know.

[@adammaurer9412]

What rpm are you running with the Starke Elevate?

[@BMWorner]

Great video Michael. Presta Super Cutting crème works filler also. Diminishing abrasive. So most boat detailers use a DA? Man, long process. Even my Mille gear driven is a chrome vs any Rotary but that’s me. Great vid buddy

[@Rabbit.760]

Rotarys are for finishing. Long Throw DAs are for cutting

[@maximolotov]

Can da manage it all ?

[@sammyvukovic4998]

What I have found out in this video is that every one I know is using the wrong pads

[@ronpaul2012robust]

I used a rotary for buffing and polishing auto paint for 10 years, I recently got an orbital polisher and will never use a rotary again for polishing.

[@alanpidick2895]

Do you provide cut and buff service just don't have the time to do my self and rather pay a professional like your self.

[@marinedetailsupplyco.-tamp3457]

We do offers services in the Tampa Bay Area!

[@alanpidick2895]

@Marine Detail Supply Co. - Tampa Bay Please leave a contact number

[@richardmundo9709]

Keep that puffer moving to slow risk burning through also stay off edges or you'll go through

[@carlosoliva1376]

Good comentario

[@amiabledave50]

How can you prevent or retard tanning on a white hull? I compounded and waxed the hull to a mirror shine. Kept the boat in a marina for 3 days to install new bunks on my trailer. Pull the boat out and tanning lines. Won't wash off. Now I have to spray on an acid to remove the tanning lines and destroy my hard work. Wish I have to do over again.

[@AJ56]

Almost finish without swirls? Mate you can finish perfectly with a rotary on the softest of paints.

[@ourv9603]

BUT, your Dewalt does not orbit. !

[@outdoorsman8498]

How Bout aluminum bass boat

[@tylerdavid1626]

bro who taught u how to use a rotary😂😂😂. they need to be fired

[@marinedetailsupplyco.-tamp3457]

You should make a video to show us how to do! Thanks for your feedback.

[@tylerdavid1626]

@@marinedetailsupplyco.-tamp3457 i’m glad you loved the feedback. do u want the video in black and white or color

[@zoransusak2354]

If that was mine boat and you do what you did Same SECOND yopu would go home

[@TheJustonemore]

Splotchy

[@frostycools1315]

get some foam pads from 3m throw away all that garbage in the video