How to build a billiard table - Part 1

[@ferdyseptian59]

Any pattern size model for sharing, please?

[@enriquemerea1962]

Hello ,measurements of the woods for the bands please, thank you

[@maryrine-marybel7118]

Wish u could explain what you r doing

[@Luanix1]

Buen trabajo! Te agradecería mucho si pudieras dar las medidas de la mesa

[@CJMFitnessJourney]

what magic happen from @14:42 to @14:45 ?? Where did the staplers go?

[@JoelChhangte87]

they turn upside down first before stapling

[@robertbenig301]

They are cousins of legendary efren bata reyes, and yes they also have magic😅😂

[@maryrine-marybel7118]

Written instructions please

[@hasnulfaiz8646]

Boleh bagi ukuran??

[@nissaasotigue5407]

Ask kolang po sana anong size ng table and ung billiard ball pati ung guma sa banda?☺

[@thediys-crew6303]

42x74 inches size ng table. 2inches ball size. Goma is standard size

[@MOTOvlog-cj1fv]

At least Sana may measurements sir para ma estimate yong materials na gagamitin especially sa Plyboard..

[@ernestosolis3587]

Buenas noches me podrías apoyar con la medida de los orificios para las buchacas plis

[@maryrine-marybel7118]

What kind of plywood

[@DEKAYEPEE]

Hi there, Great JOB!!, could you please detailed all the measurement here?

[@takloygods1978]

boss pede pa share ng size ng billiard table at mga pockets tnx sa reply

[@gwargumm9511]

That is hardcore handsaw work. Well done!

[@zylejohnburdas7014]

Sir mag kano pagawa ng mini billiard sa inyo

[@jhomztvmixvlogs811]

BOSS PWEDE MHINGI BILL OF MATERIALS NYAN, TSAKA MGA SUKAT.. SALAMAT PO.

[@williamk7688]

Where do you find the template for making corner pockets?

[@2869may]

You have to do the math and geometry... I built this table from the ground up... I'm pretty proud of it, check it out if you don't mind... kzbin.info/www/bejne/ioOQg5uufZ2qmdU

[@corygueco7437]

Boss anong mga sukat yan boss

[@babihart8578]

Dimensions plss

[@mmlstv1042]

Ang galing mo sir sana meron kayo list of materials pati sukat 😊

[@novakchong3980]

ano tawag sa goma na banda lods?

[@thediys-crew6303]

Billiard Rubber Bumper or Cusion po

[@nonatogesalan1610]

Boss Ang ganda Po NG pagka gawa mo tanong kolng boss magkano Po lahat lahat n gastos nyo Po Jan salamat sapag sagut

[@thediys-crew6303]

Thankyou po. Around 10k din boss. nagastos sa materials

[@nangskitv]

Location po Bagong kaibigan

[@danielmurzellotheunknownma7481]

Hello👋🙋‍♂️ there🌻👍 Amazing and very interesting project video🎥👍👍👍 Super like👌👌👌 Do keep posting Warm regards and best👍💯 wishes The UnknownManCub 👍😎👨‍🏭

[@liamsedon4051]

Sir may materiales na ako pero di ko alam ang sukat pano mg start..junior billiard lang po..thank you.sana matulungan nio ako

[@RoeiAvraham]

where you bought the bumper cushions?

[@jaypeegomez448]

Yung kapal ng kahoy sir ano sukat Ang ganda ng pgkagwa

[@thediys-crew6303]

3/4 Marine Plywood sa top base at mga support/paa. 2x3 and 2x2 sa Top rail at bandahan.

[@maliahjosol6867]

Ano po ba sukat Ng circle Ng biliaran po ?

[@jonathanarivan3204]

Magkano boss ganyan kalaki

[@macgaiber7962]

ikaw lng ba gumawa nyan sir sa stick na naka angle cutting pra sa rubber ng bandahan o meron moulding nyan na mabibili?

[@mickkasanadin9970]

Boss kailangan ba straight Yun butas sa gilid

[@romyramirez9464]

Sana mga sir meron kayong measurement ng billiard table,saan po sir nkkabili ng mga accessories like bouncing rubber

[@Empeyow]

pwede po pa share mag kano po lahat ng nagastos nyo?

[@Ginzzplay]

What kind of plywood you are using ma'am/Sir plzz reply God bless you po❤️

[@sittiehaniyatingaraan5099]

Sir saan mo na bele ung material neyan

[@arnoldnepayofficial1418]

Boss lagay mo din sukat ng lhat

[@JohnP-fx1se]

The details of measurements and type of wood and tools needed are all given in the music 😒

[@ulyssesornelas627]

u skipped the most important part. how u cut the wood bumpers. ?like degrees needed ?

[@jhaudiibarra8457]

Palagay naman ng mga sukat..please

[@mannyvalzapata7115]

Good day sir . ano po size ng pocket ?

[@neleeralertalud2070]

magkano kaya po nagastos nila?

[@pablocj2498]

pwede po ba malaman dimensions niya sir

[@zylejohnburdas7014]

Ang ganda poh ksi ng pag ka2gawa nyo pang re2galo kupu sana sa anak ko😊

[@walangkwentangbloger180]

MAG KANO PO BILI NYO SA BANDA??

[@nassersindatok5853]

Pwdi malaman mga sukat nya sir salamat

[@jerichovillablanca622]

Bat hinde marble gamit

[@yayeltv]

Hi sir subcriber nyo ako ano mga size ng ball at yung rails paki details sir ang ganda ng gawa nyo

[@ryanvillano6418]

Magkno po magpagawa ng ganyan?

[@francisalmendral1770]

list of material please

[@jacobjones5269]

You need to stretch that felt when you cover the rails and bed.. Otherwise the felt will move around when you place your bridge hand down on the bed, and the rails won’t play properly.. Also, you need at least one shim on each pocket facing to keep the rubber from expanding over time from moisture.. That makes the pockets play phony..

[@2869may]

Rubber expands from moisture....?

[@jacobjones5269]

@@2869may It will bow over time, without a shim.. making the pocket play phony.. Now, I’m not an engineer or a scientist, so maybe it’s contracting?.. I don’t know.. That was an assumption on my part.. I apologize.. However, I have plenty of experience in all things pool, and in my experience one shim is best.. Some double shim, but I prefer extended rails and one shim..

[@2869may]

@@jacobjones5269 No need to apologize brother... Check out the table I built in my videos, turned out pretty good.

[@jacobjones5269]

@@2869may I saw the first vid.. Yeah, nice work..

[@2869may]

@@jacobjones5269 Thanks man.!

[@seanyunzal613]

Boss pwd ba magpagawa sayo ?

[@piarasingh8681]

Hi, can you please tell me where you got all the stuff from? Please. I am building one for my son and so it would be great if you could help.

[@francorobledo2277]

Salta mucho la bola pierde rebote

[@julianosnooker9186]

Show 👏🏻👏🏻👏🏻👏🏻

[@matthewstudios1868]

hola, ¿puedo saber qué es la cosa de goma que pones a los lados que hace que la pelota rebote?

[@bol-anongseaman8679]

That is cushion or cushion rubber

[@LorenzuGo-fo5tt]

God job

[@jaypeegomez448]

Anong kapal ng legit na ginamit mo boss sa bandahanmo

[@thediys-crew6303]

2x2 lang boss hinati ko lang gitna 25 ang angle. Yung Top rail naman 2x3 good lumber yung tama.ang sukat hindi undersize.

[@jaypeegomez448]

Salamat sir Ang gnda ng pgkagawa

[@oksuperstar8370]

🎱🎱💶💶💶💶💶💶

[@user.3015]

Why don't you specify the lengths of the pieces?

[@donb.echaure]

Anong sukat ng bola nian boss?? Salamat! 😇☺️

[@33정책-l8g]

It took several hours to complete.

[@andresgalvan384]

Buenas noches no me diirias que medida tiene la madera que va pegada la goma muchas gracias

[@albertilagan]

Anong size ng bola mo sir?

[@thediys-crew6303]

42x74 table size. Ang ginamit ko po 2inches size biiliard ball.

[@albertilagan]

How about ung angled wood rail for cushion? Ano size wood and angle sir? Or tancha lng? Haha

[@thediys-crew6303]

15 degree dapat sinunod namin. kaso tumatalon pa bola sa banda kaya adjust kami to 20 and then 25. so hinanap ko yung okay bounce ng bola na hindi tatalon. trial and error. May factor din size ng bola at height ng railings. Medyo mababa kasi railing namin below 2inches.

[@albertilagan]

Sige sir. Thank you. 🤗

[@hlcmiofficial5269]

anong po pangalan ng ginamit mo na pangdikit sa rubber sir??

[@thediys-crew6303]

Greco. strong adhesive. Sa shopee or lazada maoorder boss

[@muhammadisrarulhaq9052]

Thank you amazing

[@33정책-l8g]

👍👍👍

[@dirceumachado1879]

Como faço para saber essas,medidas dos pés. Por favor.

[@enriquemerea1962]

Me encantó felicitaciones, si me podrías decir las medidas de las maderas que usaste para hacer las bandas , te agradecería,, excelente trabajo , bendiciones

[@thediys-crew6303]

Thankyou

[@Omar_BananaToxin1701]

yeah well..you can't..it's impossible..even tables made by engineers in factory can only have % surface flatness to level at best..talking about albastar or whatever slates chiseled by computer driven machines to be as flat as possible..how flat can the surface be in ones made at home up of bendy wood boards :/..you can't DIY a billiard table..

[@MrErickMesquita]

Are you blind? 😂😂😂😂😂 Wtf

[@Omar_BananaToxin1701]

@@MrErickMesquita lol filter

[@dangalera6326]

A jealous hater spotted lol. Just say you're a talentless person who's unable to do what he can do. As long as this is playable, who cares?? It doesn't need to be the best billiard table. If you want the best table, go buy a slate table...no one's stopping you from doing it.

[@Omar_BananaToxin1701]

@@dangalera6326 a stupid idiot with a dangling belly or receding hair line spotted...I'm talking about the game in general and how it's one if the best games to play and how someone who might think its a simple game but its not...and how much technology is needed to make a pool table...what does it have to do with what he did...he did great...

[@Omar_BananaToxin1701]

@@dangalera6326 a 5 footer who has no friends and looking for a girlfriend spotted...I was talking about the tech that goes into the building of the table...and altho it looks like a simple game but its not...