How To Build a Bloodbowl Stadium, And the Word Warhammer for Dramatic Effect

I had so much fun making the last gaming board I decided to make one more for my shop!
Bloodbowl board seemed a bit boring so I went with bloodbowl stadium with working lights.
Bloodbowl Stadium from Kraken link here: www.kraken3dst...
I found the adverts images here : warhammer.foru...
Check out Frankie : / @frankierogersart
and the miniature hobbyist : / @miniaturehobbyist
Uniformation GK two link : www.uniformati...
Get $80 off when you use Code: ground
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected...
🎨 Supplies: elementgames.c...
🖌️ US Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/3FuG821
▪️ Sunlu standard Resin: amzn.to/3Fns0aV
▪️ The Army Painter Wet Palette: amzn.to/3M6Q45K
▪️ Vallejo White Ink: amzn.to/400s4ae
▪️ Citadel Chaos Black Primer: amzn.to/3tw57zm
▪️ Gold spray paint (similar to Montana Gold): amzn.to/3Fm1rTo
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/45DgK53
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/3M46sUw
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3rP1gx3
▪️ Mixed sandpaper: amzn.to/492fon6
🖌️ UK Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/46AFX1j
▪️ Sunlu standard Resin: amzn.to/48ZDgYv
▪️ The Army Painter Wet Palette: amzn.to/3tFj1zv
▪️ Vallejo White Ink: amzn.to/3Fnu4zH
▪️ Vallejo Blue Violet ''Pinkle'': amzn.to/46VPsY
▪️ Citadel Chaos Black Primer: amzn.to/48ZllkQ
▪️ Montana Gold spray paint Gold Chrome: amzn.to/46T2uWM
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/3FkG7Om
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/491selO
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3tFujnj
▪️ Mixed sandpaper: amzn.to/3S5ZaTX
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected...
📍 Check out ROXY ROSE!
....
vm.tiktok.com/...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my KZbin channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected

[@akakitai1110]

Do you (or anyone really) mind sharing more info on the lighting? What kind of LED panel did you use? Maybe even a link? Anyway, great build and immense motivation to build this myself!

[@samuelbennett1717]

I've never played Blood Bowl, I don't play any Games Workshop games but that "stadium" makes me want to give it a try! Awesome job as usual I hope you make a Blood Bowl sports center style highlight video of some actual gameplay in your stadium!

[@andreseduardomaneroperez8297]

I'm from Mexico and I've just started this hobby (blood bowl) 2 years ago and let me tell you that this stadium just took my breath away, you are an Artist and a genious! Is there any chance you can share / sell the files to a fan (me) that would love to print and share this amazing hobby with my friends? Please let me know, I've just fell in love with your amazing work, once again congrats!!!

[@yodavdarth]

This is soo amazing, I live nowhere near you to come and see it but tempted to make the 3 hour drive, owned blood bowl for 2 years got 4 teams all painted up and only playing my first game tomorrow lol

[@3Xero3]

I wanted to do something similar. For my undead, I got some random boxes of zombies to convert into fans in the stands and cheerleader ghouls. Then my second team was the Saurus, so I got some STL files for Aztec temples and statues. Still a work in progress though.

[@Groundeffected]

There’s some awesome fans for printing that Ive seen. Definitely in the list of to do when I can afford them !

[@paulwake9789]

This is fabulous. I'm so insanely delighted by this that I'm making one just like it. Or as like it as I can manage. With the printing done (so much resin!) I'm trying to figure out how to wire up the lights. If you see this and have the time and inclination I'd be really interested to know what you used?

[@paulwake9789]

Just found the answer below (should have looked harder): jenyolon led G4 3w bulb 6000k

[@jbumgarn]

Hey Your Dad, this looks amazing! I haven't played Blood Bowl in years, but I would love to play on this.

[@Groundeffected]

Tbh I’ve never played it haha but it looked interesting so this is what happened

[@dingwoot]

Hey Dad, saw this on TikTok and was hoping you would make a Video, this is an amazing build thank you man.

[@Groundeffected]

Glad you came to see it dude!

[@slawlaskowski]

Amazing job!

[@randolphmagee]

I'm not upset,I'm just chuffed George came over,cracking video, Don't forget to get yourself some wood glue 👍👍

[@Groundeffected]

I’m always chuffed when George comes over.

[@jmaxx6894]

Only got 1 word to say "EPIC".

[@Groundeffected]

Thank you

[@studiofoureightnine]

Thanks DAD! Still waiting on that milk.

[@Groundeffected]

You and me both!

[@bora773]

Correct me if I am wrong, but low viscosity CA glue on wood is kinda stupid, because it gets soaked up and the bond is not even good/weather resistant? I love your videos and "don't care" attitude, but in this case it is realy kinda silly, considering the time you invested in everything. Give me you postal adress, I will gift you a nice big bottle profesisonal grade wood glue :-)

[@Groundeffected]

I used thick superglue you can Litterally see the beads like welds across the bottom, thin ca would be useless but thick doesn’t get absorbed as much and the activator sets it really fast before it can soak up. I don’t care lol but I cared enough to think of that at least. Would’ve used epoxy if I could’ve been bothered but that’s too much extra work hahaha the tricks ( if you can call them that) come from model aircraft building i built many large scale rc planes from scratch in my time before this. I promise there was a little bit of calculation involved lol

[@foxbat51]

Really upset.

[@banhammer7243]

The blood bowl throwing template always makes me think they are pieces left on a sprue still lol

[@JonathanMerry]

That's one lekker stadium! :D It really needs some rabid fans in the stands though to bring it fully to life.

[@jurgenwinter1157]

Hi, great stadium. Have a Big stadium as well. Have no lights yet. Which LED did you used? They look amazing.

[@Groundeffected]

jenyolon led G4 3w bulb 6000k

[@Amp1771]

Where did he get the 3d print images from? This looks amazing.

[@fejjjs]

Nice job, I like the attention to detail! I am printing my own right now but I am having problems especially with the billboards and fences when I print on my resin printer. No matter how I rotate and set up supports, I encounter issues. The bases become uneven or they detach from the build plate all the time. Do you have any tips? I'm using Lychee for slicing.

[@thatguywithapaintbrush]

This is so f****** brilliant!! I’m gonna start one of these boards myself now 😅 dont’ have the place, but that’s a problem for future me. I wish more shops would put in this kind of efford for their customers!

[@lastusernameleft9999]

I'm just working on this set too... Curious where you got the lights from or what search term would I use to find it? Thanks!

[@rezhed]

That’s mint! Shame I can only upvote once 😁👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@richarddakin542]

Could you please make an in depth video of how you did the lighting?

[@metalor696]

"My name is your dad". I love you dad. Have a like and subscribe

[@rezhed]

That’s mint! Shame I can only upvote once 😁👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@Groundeffected]

Haha thanks dude

[@alanmorales5784]

Absolutely BADASS!!, my hats off to you, I’m currently working on something like this, and this video helped me stay inspired so I can keep on keeping on!, I’m from California but when I go to the UK I’m hitting you up for a game!

[@Groundeffected]

Well get back to it dude. You got a friggen board to build!

[@LoneYukon]

That set is just over the top lol. Good work ;) here are some words... ...my burd has left some beaking also.

[@Groundeffected]

😅

[@deankirkpatrick7658]

nice, I am in the process of completing my stadium. Under the stands I made a hollow place so I fit a small blue tooth speaker, then I play crowd sounds and appropriate blood bowl music through (at a low level to create atmosphere, but not be annoying) - I have one light printed - I may very well emulate you and print 3 more for the corners. Also I am thinking of making a travel box with wheels to transport safely, remove the top and is set up to play...Great build you have

[@jaanikaapa6925]

Your Dad, have you thought about an FDM printer for these scenery thingamajigs?

[@Groundeffected]

I have one and you just can’t even compare the difference between them. Even at the resin machines worst case it’s still better quality than the fdm best case and best case on fdm takes days and weeks to print but it’s hours for resin

[@toosekx7187]

Absolutely gorgeous 🤩. But why not going further with the board game and create also the pitch and not use the card board ?

[@Groundeffected]

Two reasons. One I ran out of flock and money for flock. Two we can flip the board and play the dungeon if we wanted to how it is currently setup.

[@l____bugc____l]

Upset! because im second.. !

[@stefank.699]

An awesome stadium indeed! I've been playing Blood Bowl for 25 years and always had plans to build a stadium. You're project is indeed a wonderful source of inspiration.

[@hyosworld109]

Kraken Studios also has a sweet post apocalyptic gas station that for some reason I need to have lol do you think you'll print the field too or nah?

[@Groundeffected]

They have so many things I wanted to buy. But I spent my budget hence no spectators yet.

[@brionl4741]

Needs a Jumbo-tron.

[@CheweeNico]

Hello ! Great video as always !

[@Xatxitor]

You've been showing it off so much on instagram. Glad you made avideo about it Daddy

[@Groundeffected]

Thanks dude

[@markburgess4528]

'king superb!

[@VikingFireProject]

For the Algorithm!

[@chancefoy6287]

this is badass man

[@danaaxelson6200]

Next is to do a Thunderdome. Two orcs go in, one orc goes out.

[@anthonycantu3881]

SWEEEEEETTTTT

[@musmo]

Epic! 👍

[@ConnorS5645]

Amazing, might have to pop into your shop and see it sometime soon, just starting a gnome team myself (fairly new to the game)

[@東海道五十三次-b2l]

日本でも同様のスタジアムがあったら大人気になりそうです。素晴らしい創作物に感激しています

[@Driz7ziahs]

oh boi.... oh boi, oh boi, oh boi, oh boi... can't wait for my workshop to be complete so i can start knocking out stuff like that 😮

[@8heimdall8]

i d love to came and play on that amazing board but i live in italy, i think i ll make one for my league too ! great vid as always !

[@snail1169]

This was brilliant, thank you so much for the inspiration 👌

[@FrankieRogersArt]

This has turned out amazing mate. Well done

[@jackschlaeger5024]

The word box today shall recieve words of praise for your precise measurments and all around glory of your stadium. Now for my unasked for opinion. 300 quid for resin? Mayhaps the K1 could have done the majority of the heavy lifting?

[@Groundeffected]

K1 could’ve but also I got them all out and ready in like a day or two. Just pumped them out at 0.05mm and put them across like 7 printers hahaha 🤣

[@marcna4582]

Epic AF . love it dad

[@Groundeffected]

Thanks dude

[@benstephenson8988]

Epic man! love your work.

[@mgarratt101]

This was awesome, well done 😊

[@killer-bv7xx]

A good job and looks good.

[@dwadland]

Absolutely glorious.

[@jurgenwinter1157]

Thanks

[@takisdelis5784]

Excellent

[@hiteklolife6111]

Night games under those spotlights would look awesome!

[@Groundeffected]

Yea definitely. I just leave it on for decoration haha

[@spilledpaintpot]

This is absolutely dope, great work.

[@Groundeffected]

Appreciate that

[@sooutofhere]

Soooo good! Just missing the fans ☺️🤘🏽

[@Groundeffected]

I know 😔

[@hicontrast]

First

[@philfoofighter]

Amazing mate.

[@Groundeffected]

Thank you my dude 🙏

[@Ernzt8]

Amazing build!

[@Groundeffected]

Thank you!

[@chrisburrows1380]

Great vid! been dying to build a kraken pitch for some time now, and finally bought a 3d printer yesterday! One thing I would like to ask is, do you have a parts list that you used for the lights? I have no idea where to start and the stuff you used looked ideal!

[@Groundeffected]

I just got 12v leds on Amazon and a 12v supply for the wall

[@mcdeelusk]

Epic ! Now do the field !!!!!!