In this video I’m showing a few steps on how to build a custom center console in a g body cutlass, but the same step will apply for any car.
Пікірлер: 134
@LReese-de4wt11 күн бұрын
2yrs later im still replaying this video as my guide. Still building my console😂. You the 🐐bruh
@dieselapegarage6 ай бұрын
Appreciate the tips and tricks geee Keep It coming motivation watching an learning 👀🍿💪
@HustleDiffrnt4 жыл бұрын
My dude You just saved me 1000$ I’m soooo at Home Depot tomorrow 💯
@mrdiycarcustoms4 жыл бұрын
Thanks for watching and supporting the channel, and yea bro you can definitely get it done for cheap and still look good. Good luck and if you have any questions let me know 💯✌🏾
@donwondoa3133 жыл бұрын
@@mrdiycarcustoms what’s good I have the original console but how can I build on it make a custom a little bit if you can do it for me how much would you charge me
@BigredGT-pm5lm3 жыл бұрын
Awsome design👍👍👍
@lamontmiddleton541 Жыл бұрын
Thanks for this video salute💪💪💪.
@northfloridababy10294 жыл бұрын
I tried one time but I didn't have the right stuff so I messed it up bad but I'll try again..can't wait to see part three helping me alot to by the way..thanks ya dig
@mrdiycarcustoms4 жыл бұрын
Definitely try it again bro and check out pt1 if you haven’t I show everything I used. and pt3 is coming as soon as stores open back up, this lockdown is slowing everything up for me. But thanks for watching and the support, I’m happy my videos are helping💯✌🏾
@ryangthaboss3 жыл бұрын
Nice work bro!
@jhassanbey5092 жыл бұрын
Aye man you just gave me sooo much confidence 🫡🔥🔥🔥
@ClintonC19914 жыл бұрын
you're an artist. Appreciate the lesson.
@mrdiycarcustoms4 жыл бұрын
I appreciate it bro, and thanks for watching
@williamanderson17982 жыл бұрын
Even artists make garbage. Just like this
@ChrisJ-mf7cj3 жыл бұрын
My man! Good work on this. Dude is showing some real ingenuity and making what he has work for what he needs, and not complaining or settling for less than he wants due to not having this tool or that tool. It’s looking great man. Gotta find the final video and see the finished product.
@williamanderson17982 жыл бұрын
Looks like a red and tan trash can
@heavychevymoegritty2 жыл бұрын
Im really about to try this !!!
@SprayWayCustoms4 жыл бұрын
Looking good. You on top of it family 👍🏾
@mrdiycarcustoms4 жыл бұрын
I appreciate it Sprayway thanks for watching 💯✌🏾
@williamanderson17982 жыл бұрын
He’s your family? How does this look good?
@dkennedy98852 жыл бұрын
bout to try to build mine next week for my 93 sierra
@ericbiggerstaff16802 жыл бұрын
Nice work
@gregorybaldwin7039 Жыл бұрын
Have you completed it if so I would like to see the finish results
@skyonedesignersplus10664 жыл бұрын
Thanks--this helps a lot for us just-getting-into-that-DYI-fabrication-car-game 👊🏾 p.s. but that 30° U Thee Mann!!!
@mrdiycarcustoms4 жыл бұрын
No problem I just wanna show people like me that you can put together a nice looking car on your own for cheap. And yea it was super cold that night, but gotta get stuff done lol thanks for watching 💯👊🏽
@williamanderson17982 жыл бұрын
It doesn’t look nice and it definitely looks cheap
@srgore674 жыл бұрын
Nice build. I like your style on this console and how much you got done with the tools you had. We need to see part 3 bro, hope you got it done because I know it's going to turn out really nice!
@travisjackson71714 жыл бұрын
Been watching all yo vids. You cold af with this shit bro
@mrdiycarcustoms4 жыл бұрын
Thanks bro and I appreciate the support, new vids dropping soon. Thanks again ✌🏾
@UndergroundPaintKing4 жыл бұрын
Nice work bro💪🏾 #Motivation
@mrdiycarcustoms4 жыл бұрын
Thanks bro 💯✌🏾
@oldskoolbassvan98094 жыл бұрын
Very nice work
@mrdiycarcustoms4 жыл бұрын
I appreciate it and thanks for watching
@ledmk24 жыл бұрын
Nice made
@Grant74 жыл бұрын
Nice design.....
@mrdiycarcustoms4 жыл бұрын
I appreciate that and thanks for watching
@qiyheartfilia96984 жыл бұрын
Where is part 3
@Dannydbsmoke14 жыл бұрын
Nice work man looking good there sir👏👏👏
@mrdiycarcustoms4 жыл бұрын
Thanks for subbing and for watching bro I appreciate that 💯✌🏾
@Dannydbsmoke14 жыл бұрын
@@mrdiycarcustoms any time man go check my buld out when you get time
@williamanderson17982 жыл бұрын
Don’t lie. Be honest with him, it looks terrible
@brockam3 жыл бұрын
I salute your ingenuity here. I need to follow your example.
@garysimpalow74674 жыл бұрын
Yo homie!! I was looking forward to a part 3
@613Builds4 жыл бұрын
nice work, great design. i really like the pre-design and cardboard and speakers, that's great project planning. i never would have though about putting the speakers there but its genius
@mrdiycarcustoms4 жыл бұрын
I appreciate you watching my videos bro, and I was just trying to come up with something I haven’t seen before. I gotta install my floor shifter in the car and then I’ll be installing the center console so new videos coming soon
@613Builds4 жыл бұрын
@@mrdiycarcustoms yes different and unique is best !
@cars4yall7844 жыл бұрын
🔥🔥🔥
@mrdiycarcustoms4 жыл бұрын
Thanks for watching bro 💯✌🏾
@BigDame7274 жыл бұрын
Lookin good bro let's see a vid when you put that floor shifter in I'm about to start doing mine I gotta a cuttdog myself
@mrdiycarcustoms4 жыл бұрын
Thanks bro and yea i have a video coming out on that soon, thanks for watching 💯✌🏾
@frederickmaximiliano70393 жыл бұрын
Pro tip: you can watch movies on flixzone. I've been using it for watching a lot of movies these days.
@nikoaldo43943 жыл бұрын
@Frederick Maximiliano definitely, have been using Flixzone for years myself =)
@williamanderson17982 жыл бұрын
If you’re not going to use the shifter to shift, don’t put it in there
@LReese-de4wt2 жыл бұрын
@@williamanderson1798 you got a lot of commentary and negativity for someone not doing this themselves. Respect this man’s art, or show us all your channel and how you somehow did It better
@chrislaurayable4 жыл бұрын
Nice can’t wait for finished product but forget them 6.5 go 8’s better sound quality with highs and mids
@mrdiycarcustoms4 жыл бұрын
My boy was just telling me about 8s, so yea I might have to switch it up thanks for watching bro 💯✌🏾
@68turbopowered3 жыл бұрын
loving it, what type of board are you using?
@mrdiycarcustoms3 жыл бұрын
Mdf wood from Home Depot, thanks for watching ✌🏾
@bobbywartman20582 жыл бұрын
@@mrdiycarcustoms Looks like 1/2in MDF? You might want to add the material thickness into your Vid's :) I could be 3/8in?
@sladeballz93494 жыл бұрын
Niiiiiice
@BigRichEHhthang1004 жыл бұрын
What seats are those ? They fit nice 💯
@mrdiycarcustoms4 жыл бұрын
They came from jegs racing website
@shamaskitchen92484 жыл бұрын
👍💚💖💚💖💚👍very good
@mrdiycarcustoms4 жыл бұрын
Thanks I appreciate you watching
@SouthernCustomz Жыл бұрын
What measurement was the side panels you used?
@deontawells42363 жыл бұрын
What did your seats come out of fam.
@louphi344 жыл бұрын
Nice
@mrdiycarcustoms4 жыл бұрын
Thanks bro I appreciate it
@INTHELAB20104 жыл бұрын
You actually explain in detail good lookin bro
@mrdiycarcustoms4 жыл бұрын
Thanks for the support and for watching, more interior videos coming very soon ✌🏾
@rubycortez20053 жыл бұрын
What do you bolt the consol to?
@87ChevyCaprice4 жыл бұрын
Bru that look good 🔥🔥
@mrdiycarcustoms4 жыл бұрын
Thanks bro i appreciate you watching 💯✌🏾
@adriansimmons68583 жыл бұрын
What seats are those?
@neverthatnever4 жыл бұрын
You did really job bro the imagination and creativity on you guys goes hard im so hype to try something on mines lolz
@mrdiycarcustoms4 жыл бұрын
Thanks bro I appreciate it and if you have any questions about Something or need me to make a video on something just let me know
@neverthatnever4 жыл бұрын
Man appreciate it homie showing love all the way from Polk county Florida bro so far i got bell on when i subscribe to your channel so we active bro💪
@tmoneydondolla872 жыл бұрын
Already❗️❗️
@lawrencepatterson4 жыл бұрын
👍🏾👍🏾
@BigRichEHhthang1004 жыл бұрын
Box Chevy template or console how much you charging I like you style
@mrdiycarcustoms4 жыл бұрын
I’m not doin any orders right now, but thanks for watching and supporting the channel
@SS_Gang7774 жыл бұрын
Tight work bro 🔥
@mrdiycarcustoms4 жыл бұрын
I appreciate it bro thanks for watching 💯✌🏾
@williamanderson17982 жыл бұрын
It looks loose and cheap
@MEANGENE4 жыл бұрын
Bro that look good af now i see why your Mr Diy keep at it my man's💪💯✌
@mrdiycarcustoms4 жыл бұрын
Thanks bro I’m starting to get the hang of it now, I’m bout to show how to do the door panels next. Thanks for watching bro 💯✌🏾
@MEANGENE4 жыл бұрын
@@mrdiycarcustoms No problem bro and yeah you definitely getting the hang of it 🙌 💯✌
@mrdiycarcustoms4 жыл бұрын
💯
@MEANGENE4 жыл бұрын
@@mrdiycarcustoms 💯
@derrickcrawford58273 жыл бұрын
👍
@onemanbodyshop4 жыл бұрын
Looks good fam 👍🔥👍
@mrdiycarcustoms4 жыл бұрын
Thanks bro I appreciate it, and you doin yo thang over there on yo cutty too. I been subscribed to you for a while now yo cutty gon be a beast bro 🔥💪🏾
@onemanbodyshop4 жыл бұрын
@@mrdiycarcustoms thanks fam im glad u found me. now im tuned in and got my bell on🙏🙏
@qualismatlock95722 жыл бұрын
How much would you charge to make one ?
@CatlocosGarage4 жыл бұрын
Bro u killed it with basic tools. You should think about putting some plexiglass or acrylic in the middle where u putting ya leds' to set it off.
@mrdiycarcustoms4 жыл бұрын
Yea I’m kinda cheap 😂 so I try to get it done with as less as possible, but yea I’m trying to think of something sweet for that spot for sure but thanks for watching bro and I appreciate that idea to 💯✌🏾
@chevygorillawayz25683 жыл бұрын
Did you do a part 3
@dthomas10014 жыл бұрын
WHERE IS PART 3!?!?!?
@SteveDavisCarGuy4 жыл бұрын
💪🏾
@mrdiycarcustoms4 жыл бұрын
Thanks bro I appreciate what you did 💯
@SteveDavisCarGuy4 жыл бұрын
Mr DIY Car Customs 🎯🤙🏾
@Ab110crazy4 жыл бұрын
Where can I get that rear speaker set up 💪🏾💪🏾
@mrdiycarcustoms4 жыл бұрын
I made it myself, I’ll be redoing it in about 2 weeks and doing a video on it. Thanks for watching
@Ab110crazy4 жыл бұрын
Wanna sell it to me
@rojoewilliams62532 жыл бұрын
Where did you find those seats!!!
@mrdiycarcustoms2 жыл бұрын
jegs racing
@garybovan42464 жыл бұрын
Why did you use such heavy materials ? would 1/4 " think be plenty ?
@mrdiycarcustoms4 жыл бұрын
This is only my second time making one and this is what I used the first as well and it came out good. But I’m pretty sure 1/4 can get the job done, I’m just learning as I go and sharing the information
@raymond-19602 жыл бұрын
what did those seats come out of?
@mrdiycarcustoms2 жыл бұрын
got them for jegs racing
@raymond-19602 жыл бұрын
@@mrdiycarcustoms Thank you.
@jabarimorgan58402 жыл бұрын
What seats are these
@mrdiycarcustoms2 жыл бұрын
jegs racing
@SteveDavisCarGuy4 жыл бұрын
Yeah were is part 3 lol. I’ll send you material, come back and finish 😂😂.
@BigDame7273 жыл бұрын
Whats up with it now?
@haino19944 жыл бұрын
Hello chao anh🙋🙋🙋
@mrdiycarcustoms4 жыл бұрын
Hello 🙋🏾♂️
@swa99surffin2 жыл бұрын
Do or ne one you kno build them an offer shipping
@kevinbuford77644 жыл бұрын
Bro what seats you got in that gbody
@mrdiycarcustoms4 жыл бұрын
The front are from jegs website, and the back was the original cutlass seats I just got them recovered to match the front leather.
@LukeAsOneRogue4 жыл бұрын
Is your car a 1970s or something? Mines from 1998, I don't have any vid or photos of it yet. The only reason I want to make a custom centre console for it is because there's just one thing about it's cupholders that absolutely irritates the hell out of me. But that design from the paper alone was awesome! Not going to lie
@mrdiycarcustoms4 жыл бұрын
My car is a 1986 Oldsmobile Cutlass, and I ordered the cup holders off amazon for around $10 each. Good luck on your console and hopefully the video helped. Thanks for watching
@williamfrancis21163 жыл бұрын
Man titan them cuts up . i no u can get them cuts titer
@williamanderson17982 жыл бұрын
I can’t believe you were going to put that hurst shifter with a reverse lock out on a column shifted vehicle. Looks like you had an idea and failed epically on execution
@LReese-de4wt2 жыл бұрын
Nice work bro. Haters going to come along with anything you do. Keep up the greatness