How to Build a Custom Flowmaster Exhaust System | Dodge RAM 1500

[@charlesmarshall2697]

So proud of your work quality and attention to detail. I'm 74 now and have Tig welding since I was 18. I retired , but still building Mopar trucks as my toys. Go ahead run those tips out the back after notching the bumper. I'm really enjoying your build since I owned a Gen 2 Ram years ago. I have homes on both the South Carolina and Georgia coasts and would like to drive down and visit you sometime.

[@BoostedMotorsports]

Thanks Charles! Each build gets better and better 💪

[@claymillican25]

Great Job sounds good!!!

[@BoostedMotorsports]

Thanks clay!!

[@bigeasy_f150]

i had an sst when they came out. man i loved that truck

[@BoostedMotorsports]

I’m really liking how this SST is turnout out 💪

[@charlesmarshall2697]

Get a bucket if ice and water and keep cold wet rags in it and cool your welds as you go. Stainless is bad to warp and wet rag cooling will solve your problem. You did a great job. I built a stepside 78 Ram years ago with a 500 cu. inch RB engine with Indy heads. I build the entire exhaust system from 304 stainless including headers and mufflers. It was a real exercise in patience, but well worth it. I just bought a 2015 Ram R/T and have an unlimited budget. I ordered a 4/6 drop kit from IHC so I can use long spring and shock geometry up front. I don't care about drag racing, but want the truck to be fast and fun on the highway. Motor will be 448 NA. Brakes will likely be Wilwood 6 piston frons and 4 piston rears. Exhaust will a Stainless works with cats and quiet mufflers. I searched for a long time to find an R/T with Ramboxes that also matched the Crystal Granite color of my new Limited Ram. I enjoy your blog. You remind me of myself when I was younger.

[@BoostedMotorsports]

Great tip! I’ll try it on the next one 💪

[@norbertdavid5426]

GRINDIN! cant deny the work this guy puts in. Buy a Harley and start modding that thing John! and then come back to the Niagara Area and we can ride haha

[@BoostedMotorsports]

Thanks brother 💪😁

[@jordanvargovich]

Sounds good. Im running 44 series on my ride. Even louder

[@BoostedMotorsports]

💪💪💪

[@ChasingPerformance]

Make sure you have enough fluid in trans or it won’t do anything. I had that problem. Even though the dip stick showed full one more quart and bingo. Good luck brother.

[@tgtshirts1]

I really like the setuo Thumbs UP !

[@BoostedMotorsports]

Thanks brother!

[@toddianuzzi]

40 series is the original “Flowmaster” and the iconic sound that the 5.0 is famous for. Nice choice!

[@marcminor7049]

I'm lovin it,sounds good.

[@BoostedMotorsports]

Thanks Marc! Video doesn’t do the sound justice I’ll get some better sound clips soon

[@gabebitner4101]

I aint watching any video or paying for a membership until the hellkota content is back or at least explained away. Its so frustrating to find such a great swath of info only to have it gone when you come back to watch it.

[@BoostedMotorsports]

Well you’re on this video 😂

[@therandomchannel2022]

Sounds really good, sucks about the transmissions though.

[@brewaire]

Nice work on the exhaust. How about making the dumps right through the quarter panels. Basically same exit angle, just higher.

[@BoostedMotorsports]

Thanks man! I think you guys are going to love what I have planned nobody has ever done it 😁

[@CarDr.]

@@BoostedMotorsportsI’m sure you will come up with something great! After having a ram with tips that exit behind the wheel, I could not keep them looking nice. Decided to change it to go out the back which is what everyone does. Maybe exit through a roll pan or rear bumper.

[@fortheloveofnoise]

Wish more people would have bought the single cabs so the would have kept them.

[@meengreen52]

I got a oem mopar ground effx kit for that rig.

[@gregnowak2492]

Bad ass, dude! You're doing a great job on this. The exhaust sounds really solid! Nice work!

[@That_Stealth_Guy]

Ahhh the familiar drone of 40 series mufflers.. Now no one will think it has anything in it but a V8!

[@BoostedMotorsports]

💪🤘😂

[@Ricky_R]

Sounds NASTY 🍻🍻🍻🍻🍻

[@BoostedMotorsports]

😁

[@EthanGriffis]

Transmission is probably low on fluid being that the speed sensor isn’t in the tail shaft of the trans and probably leaked out

[@BoostedMotorsports]

Not missing a sensor and not low on fluid. More info coming on the next video 💪

[@MM_in_Havasu]

Job well-done, sounds healthy! Thanks for the update!

[@Hunterrnorris]

I went with flowmaster to, with a set of shorty headers, I went with the single exit out the passenger side and I love it

[@BoostedMotorsports]

Heck yeah 💪

[@korn111685]

Dude, great job. I’m surprised out quick it’s coming together. It was just a shell of a truck. Great work!!!!

[@BoostedMotorsports]

Thanks brother! 💪

[@360VRStudios]

He very efficient on building...its like a plug and play.

[@johnsmith-qz4bv]

nice job ..welds looks nice also

[@BoostedMotorsports]

Thanks John!

[@winstonemerson2439]

Great work as usual.That generation of Rams are the best looking in my opinion just as I think the 2nd gen Dakotas are the best looking.

[@BoostedMotorsports]

Thanks man! I definitely prefer the 4th gen but this thing will look good once I’m done with it 😁

[@rost061]

I am your fan from Russia. Love your videos! Everything you do is perfect! I ve got 3d gen wirh magnum 360 , keep modding, so that's how i found you. Btw i got flowmaster super hp 2 and like it. Why dont you use those hp laminar flow mufflers ? Are they any good to your opinion? Thank you John!

[@MichaelSmith-kr9qw]

John does that 727 have the provision for the throttle kickdown linkage because without it will not make line pressure.

[@BoostedMotorsports]

It’s a manual valve body

[@MichaelSmith-kr9qw]

@@BoostedMotorsports Even a Manual Valve Body needs the Arm setup It needs it to initiate line pressure.

[@JIMFED63]

Nice work on all the vehicles, can’t wait to see this truck completed. I have a VCA edition viper truck I just purchased and it’s been completely built from top to bottom and is turbocharged putting out over 1000 horsepower. Just moved to Florida should be a fun ride !

[@BoostedMotorsports]

Nice!! Is that the blue with white stripes one I just saw some Facebook posts on? If you’re near tampa would be fun to make a video on it and go for a ride send me a message 💪

[@JIMFED63]

@@BoostedMotorsports yes it is !

[@riccochet704]

Thought about putting an X or H before the mufflers?

[@BoostedMotorsports]

I have the same setup on the hellcat ram with no x or H and love the sound so I wanted the same on the baby hemi

[@saltyofc5160]

Great job! Love watching this come to life

[@BoostedMotorsports]

Thanks me too! It’s been a fun build so far!

[@bengodard5661]

This is my favourite project so far unsuspectedly, awesome job so far!

[@BoostedMotorsports]

Same here! It’s oddly satisfying building one of these trucks properly that hardly anyone cares about these days!

[@bobbylaird4801]

Put an 8 speed in it!

[@shazbotnanu7037]

Is it just me or does it look like the speedo gear/plug is missing? If the trans is toast it would be a fun swap for a TKX

[@brycebiddle4737]

What’s the part number for the headers?

[@Edwinwest72]

Your doing a great job. Can't wait for the video

[@BoostedMotorsports]

Thanks Edwin!

[@richardgarris9305]

Surprised you didn't add some kind of x pipe in on the exhaust. I think they made the 5.7l sound Lil better over straight piping. Either way great content 🤘🏼🤘🏼🤘🏼

[@BoostedMotorsports]

I really liked how the hellcat ram sounds with the same setup and no x or H so I did the same thing on this one

[@jonscriffignano]

Are you painting the truck also or leaving it as it?

[@BoostedMotorsports]

I’d like to paint it but it has a lot of character and is unsuspecting right now too which is fun

[@dtruth5769]

Nice clean job! Sounds nice! I bet it's gonna be faster than the 5.9 Dakota..what u think?

[@jerodwolford2743]

Most definitely going to be faster than a stock dakota rt. You have 100 horsepower and 50 extra ft lb of torque, plus the 5.7 doesn't suffocate itself past 3000 rpm. With the ecu tuning itself, I can see it running about 400 horsepower and 450 torque. Maybe a little more because of the headers.

[@BoostedMotorsports]

This will be way faster no comparison

[@jerodwolford2743]

Could definitely use an x pipe because I can tell you she'll clap like a mofo without one. Although I could definitely see you troll people by lowering just the back half and have it clap all over the place then eventually fix it 😂

[@BoostedMotorsports]

Nah same setup I put on the hellcat ram and love the sound so this is a baby version

[@adrianreyna5789]

I would go with a 10 speed trans just to be different

[@BoostedMotorsports]

That would be cool!

[@adrianreyna5789]

@BoostedMotorsports I'm pretty sure it would be the only second gen with a 10 speed in the world lol

[@willmatic84]

Looks official 👌 i love it and it sounds like a beast #BSTEDMTRSPRTS

[@BoostedMotorsports]

💪💪💪

[@Brian-cf7dc]

Would you happen to have an extra 5.7 hemi 4th gen lol

[@BoostedMotorsports]

I have a brand new one in the crate dm me or email [e-mail]

[@billyzgoneape]

AKA drone master Have had multiple sets and hated them all ! Put a glass pack on and loose the "hollow" sound and enjoy a deeper done with zero drone Your ears and brain will thank you !

[@cyclonehebb06rt]

No h or x?

[@BoostedMotorsports]

Nah same setup I put on the hellcat ram and love the sound so this is a baby version

[@johncloran175]

Sweeet

[@Unfinished-Business24]

Great job brother like always top notch!!

[@BoostedMotorsports]

Thanks man I appreciate it

[@think1stproductions]

BOOSTEDMOTORSPORTS HELL YEAH BROTHER... Love FLOWMASTERS.... the best sounding muffler...I have owned 20 plus Foxbody Mustang s and they all had them FLOWS on them lol. The 40 series is the SHIZNIT!!! Mad Skills as always John..Rock on brother 🤘🤟🤘🤟🤘🤟 🤔🚫🧢💯💪🎬🚛☁️🚛☁️🛻☁️🚐☁️🚐☁️ #BOOSTEDMOTORSPORTS #HELLKOTA #HELLRAM #CHICKENNUGGIES #MCDODGES #HELLCATSWAPTHEWORLD

[@cristianisbae6452]

I wish I can buy the 4th gen ram🥲