How To Build a DIY Cargo Bicycle Trailer - Cargo Bike Trolley Cart Homemade

[@edrianoph]

Comment any project you have in your mind and i will do it in this channel Thankyou friends😂😂😂

[@boblegogamer]

build a electric bike and electric trailer set up Also what welder did u use in this video i am looking for what welder i should buy

[@muhammadsaleem6846]

You tutu You Ruth Ruth Ruth Ruth You tutu you you you you you you you

[@justinbasas9808]

Idol pwede ka bang gumawa ng katulad nito pero 4 yung gulong(front wheel namomove)?

[@heliorodrigodeandradeandra7182]

Good night friend, could you pass the measurements, I was very grateful

[@frankburton5460]

Wow!!! That’s nice!!! From scratch!

[@edrianoph]

Thankyou Friends For Watching Comment down below on what project you want to me to do ANY PROJECT IS OKAY

[@Kopie0830]

Thank you sir. Very good build.

[@edrianoph]

@@Kopie0830 thankyou din sir

[@snoopu2601]

Is the frame aluminum? Or steel?

[@James-ke5sx]

Great job. I also have one for my bike. My frame extends past the wheels, so it supports the wheels on both sides of the axel, more support for heavy loads and stops the wheel getting caught in stuff when going on forest trails.

[@edrianoph]

Thats awesome sir

[@joseaballe4422]

The most important part is showing how it is attached to the rear wheel. Making a cart is just easy, that's it!

[@jonenglish6617]

Nicely done. you planned those cuts perfectly

[@edrianoph]

Thank you! Cheers!

[@Apchestangenightout]

That's a great idea the way you welded those screws to the pipe and connected the wheels was a good idea. Thank you for sharing your video .

[@frankburton5460]

I have a challenge for ya! A store that goes on the bike! Like this, but a store that kids or even adults can stand on/inside and operate.

[@chrishayes5755]

Greetings from Canada. Excellent job on your cargo trailer, it turned out great!

[@edrianoph]

thankyou very much

[@corneliuscornel9467]

The wheel axles will not resist at 20--30kg load.It will bend up and the wheels wil not be paralel for long time.

[@edrianoph]

I will add some support bracing to the sides

[@Robertjustice101]

Nice Job when I built mine butted the boards closer together that way there is no big gaps in the trailer floor for stuff to fall threw.

[@edrianoph]

That's a good point sir, I haven't thought about that

[@GoogleGoogle-eh4rj]

Wow that's awesome you have more talent than most grown men

[@edrianoph]

Thankyou sir

[@edrianoph]

Where are you from

[@mitchellmilliner2000]

I want a welding Machine now and you made it really quick and the welds held together strong super awesome man !!!❤❤❤

[@joeylegaspi3515]

Liked dahil may blade guard yung grinder.

[@customcampers8777]

That's the best style trailer as far as pulling, storing and or sleeping on too.

[@mrcsschb8010]

Great job, young master! I wish I had your ideas and skills. Greetings from Germany!

[@edrianoph]

I am so glad sir that there are people from Germany watching my content Thankyou sir

[@mitchellmilliner2000]

Man that is so dang cool I loved watching you weird that together paint it and make attachment for bike your Awesome Man!!!

[@chelefoncho]

Con muchas ganas y un poquito de inteligencia todo se puede hacer muy buen trabajo felicidades

[@edrianoph]

please translate to English,

[@edrianoph]

i can't understand it

[@chelefoncho]

Go to Google translate to spanish to English yo your language

[@edrianoph]

wait i cannot copy it through here i will open my laptop

[@edrianoph]

With a lot of desire and a little intelligence, everything can be done, a very good job, congratulations. thankyou for this

[@colrodrick8784]

You did a great job. I want one.

[@fikriiskandar5121]

Good job sir, hopely i can make like it.

[@edrianoph]

You can make like that too sir

[@goransvraka3171]

How did you attach the wheels/make an axel? You didn't zoom in

[@zulwadrigucci141]

at 3:17 there are bolt welded at each end of the pipe.and the wheel uses bicycle wheel

[@02ALEK]

The whole idea is to be used to transport a roll from the store... but I would make it stronger... first of all, the wheels should not be screwed in like that, only on a fixed axle... and more supports In a frame... but that's okay

[@MrJoeAllert]

Well done! You did a great job on that!

[@edrianoph]

Thankyou sir

[@rc-huina8221]

Good video my friend 👍🤗

[@markdodgerjrtdodger4583]

Fantastic mate, well done, looks great :)

[@edrianoph]

thank you

[@МихайлоЯковлєв-ю6х]

Дуже дякую за корисну інфу.

[@fame00]

не плохо . Но я бы сделал шаровый механизм в кчестве сцепного устройства . Шаровый механизм как например из стойки стабилизатора поперечной устойчивости от автомобиля, или из тяги стабилизатора другими словами

[@ХусанбойИсмоилов-х6р]

❤ super ❤❤❤❤❤❤❤

[@NoferTrunions]

How did you attach the wheels to the cart? Did you make new bushings for the wheels so a bolt or smooth round axle could be used?

[@user619tlsdca5]

If you dont hook up the trailer hitch bar centered on back of bike, you will have the cart flip over when turning as cart wheels hits edge of curb or crack to flip over and you need to stop asap . It may seem centered but the physics of hook up needs to be precise and why they make them hitch locks. If cart is heavy and flip over you will damage a part on bike. It is also why they make them suspension springs in case it do happens the cart and bike be not damaged as a failsafe.. But good luck and be safer then sorry on DYIs

[@edrianoph]

Thankyou for your thougts

[@mundocreativoymas]

vERY nICE

[@edrianoph]

thankyouu

[@snailryder1]

You need a mig welder. Good job for what you have to work with.

[@veganvocalist4782]

That's fantastic , so talented ;D

[@edrianoph]

thankyou very much

[@jdiymph9230]

Gano kbigat yung kaya nito boss? Kaya ba apat na standard container ng mineral water? Ganda napaka-simply lang

[@WilberGabrielMarquezRojas]

El mejor remolques y super sencillo

[@bannourinabil4905]

Nice .what kind of steel did you used?

[@bandarpasar1]

Mantap bosku

[@freydsonventura6323]

Jesus saith unto him, I am the way, the truth, and the life: no man cometh unto the Father, but by me. John 14:6 KJV

[@edrianoph]

Why bible verse??

[@greenearthblueskies8556]

Awesome 😎

[@edrianoph]

Thank you

[@drrobotnikmeanbeanma]

How to attach the grey/silver metal to the rear bike wheel.Where to get that type of metal from what's the name of it ?

[@edrianoph]

that's a bracket for the chain tensioner of a motorized bike. I've just repurposed and make it the bracket for the trailer

[@drrobotnikmeanbeanma]

@@edrianoph I need to do that, that is so cool.Whats the name of the motorized bike.What company sales them.I will take pitchers before I modify anything

[@ThalassTKynn]

This is a really nice trailer! Does the bike feel weird when you're riding with the trailer?

[@edrianoph]

thank you

[@ErickRamírezArmas]

La verdad es que si, hay que tomar mucha precaución aparte que vas mucho más lento

[@m.s.vignesh2161]

Very nice Measurements please... Length...? Width...? Tyre size...?

[@Mikewillson-b2r]

what about a NON WELDING version

[@cristianandrescastaneda1946]

Se podría utilizar para una moto?

[@edrianoph]

It might be too fast

[@Arya-bi1dn]

Super 😻

[@edrianoph]

What is super

[@scottk8846]

If u built another, how much would u charge for it ?

[@edrianoph]

about $30

[@scottk8846]

@@edrianoph thks for the info

[@edrianoph]

@@scottk8846 where are you from sir

[@scottk8846]

@@edrianoph USA

[@andrewhenneberry9765]

I actually made one myself in high school

[@rachellacanlale2708]

Sir Ganda din po nitong ginawa ninyong bike trailer! I was wondering po sir if you are located here in Manila? I was wondering if we can do a collab po? Gusto rin po san namin makagawa ng bike trailers for delivery. :)

[@juliaallen7149]

Best decision

[@darryldanipog3980]

boss pwede magpagawa? Thanks

[@corollagl82]

Perfect

[@joedaihezergonzalez7816]

Cuáles fueron tus medidas para el remolque?

[@edrianoph]

I just trust my judgement 🤣

[@whatnowok]

What keeps the tires locked on. Just threaded on

[@edrianoph]

Yes

[@Robertjustice101]

I was just wondering about that. The wheels could unscrew themselves.

[@edrianoph]

Oh I haven't thought about that. It seems if it was a long haul, the wheels could go off

[@Cozcacuauhtli]

THANK YOU

[@edrianoph]

welcome

[@prestidigitator-j1f]

Не серьёзно. Оси погнутся на прицепе - нужна дополнительная опора.

[@samsien9105]

You need outer support frame to help because the bicycle axle too small to caring weight . not going to work that way you build .

[@edrianoph]

Thank you for that info

[@vlogmusic7093]

magkano kaya budget pag magpagawa ng ganyan?maganda kasing ganito pang bike coffee shop, hihilahin gamit ang bike

[@EvendimataE]

PWEDE SIGURO DYAN YUNG MGA PINAG LUMAAN NA JOINT NG MGA SASAKYAN

[@canaldoportugues10]

💯💯💯💯👌👍🤝

[@DryUrEyesM8]

cool!

[@edlinfelipe5121]

where are you from

[@edrianoph]

philippines

[@shivaramashivarama5519]

Good

[@edrianoph]

Thankyou shivarama

[@НИКОЛАЙПчелинцев-г1ю]

Доктора, доктора, срочно доктора!!!

[@василис59]

εισαι επικινδυνος

[@davidfuller764]

Sub’d &Bell’d thanks and well done!

[@edrianoph]

Thankyou Sir David, i am from the Philippines

[@radharanient]

BHAI PVC PIPE KA FRAME BANAO AUR BICYCLE ALLOY WHEEL DAL DO TOH HALKA HO JAUEGA. KHICHNE MEH ASANI RAHEGI

[@edrianoph]

translate in English

[@edrianoph]

can't understand

[@radharanient]

@@edrianoph Main FRAME can be Iron, rest make it of good pvc pipe to make it Lighter as it is hard to pull the weight. Put a controller, HUB motor & a battery with solar Panel For continuous Charge then it will be real Cargo Cart. Expense will be around 15 k I SUPPOSE. INSTEAD OF LITIUM USE lead acid batter as it is safer.

[@brucecarter8296]

i skipped through it just to see how the swivel mechanism worked, as that is key to its functionality. not much footage of that. it looks like it won't be able to make sharp turns without flipping or breaking the welds

[@edrianoph]

i will make a new one sir

[@greenearthblueskies8556]

@@edrianoph good job, sir

[@edalton998]

gostei chou

[@edrianoph]

What sir

[@JadonAlexanderSchintu]

yea but if its very easy, doesnt mean its very fast. the process takes days, weeks, months or years.

[@JadonAlexanderSchintu]

also you edited the video.

[@JadonAlexanderSchintu]

6:54 it is done

[@edrianoph]

I've worked on it for months

[@stroymerr]

Нагрузку никакую не выдержит. Над подшипниковой частью нависли проблемы. Обвод колеса трубой необходим.

[@youtubesponsarshipgiver2887]

Total cost

[@ДимаДолинский-ж2э]

Колёса закреплены ненадёжно ,от груза отпадут

[@rubilimit6261]

Hola me podría reglar las medidas por favor gracias

[@RAJEEVKUMAR-xk5pz]

How much weight it can carry

[@edrianoph]

I don't know sir

[@АндрейПуршев-у8с]

👌👍

[@edrianoph]

Thankyou very much

[@savinuriyon2624]

👍👍

[@edrianoph]

thankyou where are you from

[@maximilianocamelli4772]

Creo que esta mal diseñado, al tener dos ruedas tiene que tener una rotaciónaliniada con el centro del carro, es decir que pasa si hay un pozo pero solo lo pisa una sola rueda, el carro no lo puede copiar porque solo tiene bisagra en los ejes X y Z.

[@edrianoph]

What

[@adebras34]

gostei , deveria passar as medidas....

[@SSSS-w9i6x]

1:47 👾🙄

[@xaloabe9779]

Wow

[@edrianoph]

Thank you sir

[@FightmywayupLildee]

Build one sleeping in

[@ЮрийТелегин-п1е]

Колеса согнулся.

[@luckylaurel888]

ilang kilo ang bigat nyang trailer sir?

[@edrianoph]

Nasa 5-7 kg sir

[@luckylaurel888]

@@edrianoph thank you sir

[@JosejuvenalVillamizarlinares]

🎉 fue un placer conocerte y fevjff ki ki te toca de la

[@Kharitoo5]

Request for measurements

[@edrianoph]

I'll be right back

[@PauloRodrigues-pq4ym]

Dont work… the axle need double support like a fork

[@Билал-з4ь]

Зор

[@vdub5030]

Those wheels will eventually snap off, if they haven't already. You need to support them with either a full axle or forks on the side. Bad design.

[@ricdaphree7759]

Thank you for pointing that out. I had already guessed that would be the case so had only been searching and paying attention to builds with fork or full axle / substitute or equivalent. Reason was bc I was looking to pull heavier loads than what someone might usually transport daily

[@SurojitKoley-tg7zl]

দাম কত

[@edrianoph]

Thank you

[@salouhousalh5522]

خدمتك مش نرمال بعد

[@ManveerSingh-ku4ek]

Aapki trolley bahut kamjor hai

[@edrianoph]

thank you

[@raimundofilgueira5522]

Eu quero uma carrocinha quanto que er

[@edrianoph]

thanks for watching

[@davidhakes5141]

Welding, in sandals, no welding gloves, likely no welding mask. Shorts. OSHA would climb all over you, and your shop, AND, your employer, if you were doing that here in the United States.

[@Angry_Kitler135]

Everyone does that when they weld except for the people working in factories

[@Angry_Kitler135]

Also they just wear eye protection

[@piconano]

A good builder, would've scraped the zinc on the galvanized electrical conduit, to bare steel around the weld area, before welding. You conveniently jumped the wheel axle attachment construction part. The wheels will bend or break the nut you welded on to the axle, when you load the trailer with a 20+ Kg load. It's obvious you have no respect for safety or understanding of mechanical loads.

[@ramachandrapai4654]

Seems this channel is not Indian.

[@edrianoph]

Philippines, why do you conclude it's not indian?

[@BICIMOTOS.ZOIDS.]

calidad made in china 😂 literal

[@edrianoph]

Made from Philippines

[@BICIMOTOS.ZOIDS.]

@@edrianoph I was referring to the quality of the bad work he did

[@NodiraErkinovna]

Buni razmeri nechchi

[@edrianoph]

Didn't have the time to compute

[@kattymindiolaza5424]

kattymindiolaza

[@divjak58]

Junk it won't hold 50lbs or last a month of use

[@heyheynowinga9972]

SHIPPY BUILD VERY PROR QUALITY VERY ASIAN DESIGN VERY VERY CHINA /JAPAN INDONESIAN INFLUENCE IT WILL CRUIMBLE DOWN THE ROAD 4 MINUTES LATER

[@เกษมบุญสูง-ด5ฟ]

ปั่นหนักไหมแล้วปั่นเร็วได้เป่า

[@biketechnician2972]

Market ma Ai ab ak or new #EletricBike With lithium battery jo dikhe smart par 1charge pe double challe kzbin.info/www/bejne/iX64mImKaZd_pq8