HOW TO BUILD A FLAT-PACK "EVO MOTION DESIGN" INTERIOR. Tips, tricks and hacks!

[@lindadouglas5972]

Brilliant video, nice and easy to follow your instructions, Thank you

[@NickTsiatinis]

You have no idea how pleased I was to see it didn't fit (for all the best reasons!) as I've just built an EVO kit for my Transit Custom LWB and because I've raised the floor an inch for the insulation I have the exact same issue. Nice to see that you fixed yours the exact way that I was thinking I had to get mine done. Now to find a carpenter to come round and scribe it in, as I don't trust myself not to mess the job up! Thanks for the vid :)

[@icerabbit8605]

Thanks a TON for the video series. Was hoping you’d show the physical hard install at least a little, after the flat pack build. What are the “ fixings “ ( can’t tell from the video on mobile ) for those who would build their own cabinets ( no vw vans nor pre made flat packs in the us ) and how / where does one affix finished cabinetry securely to the frame?

[@dantube420]

I'm looking for the same info myself

[@13macha]

the most comprehensive informative DIY vids on youtube today. and you guys are funny AND you don't edit out bloopers. love it. im actually about to buy a mitsi delica 2004 Chamonix, kit it out using your ten commandments and live in it. keep em coming boys. P.S a mate thinks you look like WWE Goldberg/Bradley Cooper dunno who the second one is but yeh, you got goldies beard.

[@ivanbullen4284]

I recognize that van in the background. Luke Brabants has recently painted that all up for it's owners. Cracking paint job.

[@colinfleming2502]

Is the ply behind the drivers seat there to make fitting the units easier? Great vid👍🏾

[@ashleyeaston3203]

Brilliant video guys

[@CombeValleyCampers]

Glad we can help

[@ashleyeaston3203]

@@CombeValleyCampers I know you said you didn't show us how you attached the work top to the van. But I would be grateful if you would be able to do a video to give us an idea of how you do it please. Thanks

[@lifesasprinter4409]

More on that lovely sprinter build in the background please 👍

[@CombeValleyCampers]

See the Just-Escape team, this is thier build :)

[@joshcarroll5284]

Love your videos! Hoping you could tell me the name of those hinges for the doors or where I could purchase some please? Many thanks and keep making awesome content 👍

[@oldmod2866]

Very informative and is a long job. Put the t trim in the airing cupboard overnight it makes fitting a lot easier.

[@CriftinsCampers]

What a surprise to see Just-Escape make an appearance with a (then) unpainted van in the background!

[@frankfisher99]

Thanks guys, good video

[@CombeValleyCampers]

You are more than welcome dude

[@sharonpoole1950]

Hi guys, generally how many metres of t-trim would you suggest buying for a standard swb sized kit? Many thanks

[@LocknessRides]

I don’t wanna be a buzzkill but Westfalen stole that idea from a California manufacturer and got around their patent by only having one side lift up on the pop top! But I still love you and your videos so keep up the good work

[@bornfreefreedom4900]

Wow. At the start of the video I see a big camper. 🚚 May I ask what are you building. Best wishes 🌟🙏🌟😊

[@CombeValleyCampers]

All will be revealed with that one very soon!

[@EGGINATOR1991]

Loving the content. Do you have any suggestions on where I can buy flat pack furniture for a 2015 LWB Ford transit connect? Thanks in advance.

[@roby18tid]

Have you ever used kitline design? Any idea if they are comparable with evo design?

[@andywt8460]

Not sure I would chuck a Reimo, but question is “does it rattle like a Westfalia?”

[@danhellyer840]

Just saw the beast in the background pop up on Facebook 😍

[@CombeValleyCampers]

Its all part if the show sir ;)

[@dudeleboski2692]

Lee, how about adding a cheap science diesel heater for your workshop? Gary installs them no?

[@vincentlehmann646]

top job as usual, regards

[@jamiehill7407]

What would you do to hide the wardrobe unit backs where the window is, simply curtains or something like a panel? Asking as I’m looking at a caravelle.

[@richardscott8094]

I used blackout film tint so from the outside it didn't look strange followed by either hardboard cut to the shape of the glass or plywood (Which either you prefer)

[@paulahamilton7290]

Och I wanted to see the screwing I bought a van and the rear section of unit only has one screw holding the top half to the van the whole bottom of my unit is solid but the top half only had one screw at the back and none at the front so it rattled about when u hit bumps I think I am going to remove and refit it properly I have the units that go to the roof all the way along and has a blind built in for the cooker window

[@paulahamilton7290]

The base is solid but the top rattles around and does my head in after inspection I am shocked at only finding one fixing unreal it was not making any noise on the test drive it was after a few days we noticed it

[@paulahamilton7290]

How many fixings would you recommend? I was thinking as much as possible

[@robertgreen7890]

Great Vid! 14:55 - pretty sure the screw won't go in with the driver in reverse! ;)

[@kgb3410]

Hi, could you help me with a good retailer to purchase tailor fit 3mm rubber mat for the full rear of my 2013 t26 twin sliding door transporter please,also correct side door step for same van,i know side door steps have to be deeper to compensate for new ply flooring and rubber matting but not sure who best to purchase from, I know your quite knowledgeable so guessing you could recommend someone, very much appreciated sir

[@CombeValleyCampers]

We would be happy to help. Please email [e-mail]

[@davidgrieve259]

Great video, what size slot cutter do you use for the T trim

[@CombeValleyCampers]

This interior has it pre cut, but if you're making your own a 2mm or 3mm cutter is needed. Just double check with the trim you purchase

[@mjmdiver1137]

Great video... I'm looking to put together a camper van here in the US. Do you know of any companies making flat-pack interiors for vans in the US?

[@CombeValleyCampers]

Thank you! Im afraid I'm unaware of any companies in the US that provide such a service. It may well be worth calling the team at Evo Motion Design to see if they would ship overseas

[@mjmdiver1137]

@@CombeValleyCampers Thanks. The reason I asked about US companies is because the the VW vans aren't available here, and most of the European places tend to center on that or other vans that we can't get here. I'll contact them and see what they have to say.

[@petermccurrie3853]

Thanks for an excellent range of videos. I love those 'plastic threaded inserts' for assemblig the evo flatpack. You don't hev them on your website. Any clues on how to source them. Kind regards Peter

[@AlysonDavey]

How do these units secure to the body of the van?

[@Daz555Daz]

26:08

[@paulahamilton7290]

Blue tack!

[@paulahamilton7290]

Haha only joking mate I was hoping to see that as well

[@silverlinkz]

Another great video!!

[@richardjones-jp1db]

any flat pack kits for vw caddy maxi?

[@aidanthomson4727]

Any one any idea where I can get these plastic/nylon grommets? Thanks in advance

[@artillerychick]

Damn came here to see how you secure the furniture lol the bit you didn't do 😅

[@stephaniesturgeon5591]

Dang, alot of time putting in them grommits ( not sure that word u called it) there's like 1000 of those! Lol

[@shauncourty5180]

Ye, never mind the t4 show us the big one

[@CombeValleyCampers]

It shall be revealed in time

[@hrve]

Great video, but that trim you had to fit around the edges is cheap and nasty.

[@campervanrouge1119]

I've been trying to source grey T trim. I live in France but happy to buy from the UK / Germany etc. Any ideas anyone?

[@CombeValleyCampers]

Try the guys at Clear Cut Conversions.

[@campervanrouge1119]

@@CombeValleyCampers Many thanks, will look them up.

[@campervanrouge1119]

@@CombeValleyCampers Just visited their website and ordered 20 mtrs of 15mm light grey. Excellent price, too. They don't automatically deliver to France, but a phone call on Monday will probably resolve that. Thanks again for your help.

[@CombeValleyCampers]

@@campervanrouge1119 if they dont. Get it sent to us (they know us) and we could get it delivered to you

[@markhowie1967]

I honestly thought professionals used Milwaukee

[@CombeValleyCampers]

We do!

[@chriscoast2coast1207]

Order the sink the counter would come precut. Why wasn't the counter pre cut for the cook top?

[@CombeValleyCampers]

The customer specified a hob only for this interior and ordered the worktop with no cut out so they could choose the exact position they wanted for the hob.

[@LifeinLancashire]

Would be nice units if the trim wasn't so cheap and nasty ☹

[@janzagar2957]

Half an hour later and we don't even see the finished interior.

[@CombeValleyCampers]

Hi Zan, thank you for the comments. You do see the completed interior right at the beginning of the video.

[@Cheeteach]

There is a huge difference between build and just assemble a premade item. Your title is misleading!

[@paulahamilton7290]

Well he did build it!

[@connief5154]

f you ever come across a software design company 'Vanspace 3D", they are a scam company. Do NOT spend your money. They are really bad.

[@davidbarrett7424]

great vid :-) what are those "in line" kitchen style hinges called kzbin.info/www/bejne/oom7e4erjMikf9k please?

[@Edgunsuk]

so not how to build one then, how to assenble flat packed overt priced plywood,,,,,,

[@paultheguitarlegend]

Or maybe just buy one from Custom Camper Kitchens, built and fitted for less than the cost of an EVO, and you’ll save 2 days labour.

[@christoffersundin1815]

Put so much money in that sunfaded, rust T4 is a shame.. a proper buff/paint from a professional should ben done already..!! (You "eat" with your eyes also)