how to build a homemade screen press step by step

[@claudiolewin5416]

Sir allow me to say that you are a life saver!!! Thank you very much for your generosity, not really common these days... Thank you again., Claudio from Appleton, Wisconsin

[@BeachesBeTrippin]

claudio, you are very welcome, and I thank you as well for watching and the kind words, I appreciate that. I am happy the video helped you out.

[@HapillyMe]

Thanks for taking the time to explain every step! And marking the wood pieces. You were very thorough!

[@BeachesBeTrippin]

thank you !! I'm glad it helped you out.

[@donw2175]

I couldn't really find decent plans online for this. so i mocked it up in sketchup and it gave me a good idea of how to make it.

[@BeachesBeTrippin]

glad it helped you out. thanks for watching !!

[@HapillyMe]

Thank you for this step by step video. Very thorough on your instructions. Thank you!

[@BeachesBeTrippin]

your very welcome. I'm glad it helped you out. thank you for stopping by, I appreciate that.

[@brnsuprmn]

Great video with super easy instructions on how to put it together. Thank You will be making one this weekend

[@BeachesBeTrippin]

I'm glad it helped you out. Thank you for watching !!

[@miracleprayers51]

Great job on instructing how to make this. I really appreciate the simplicity of its construction. Keep up the good work.

[@BeachesBeTrippin]

***** thanks for watching !!

[@etheillism2656]

Good job sir! Very very helpful and explainable just finished building my own! Thanks a lot!!!!

[@BeachesBeTrippin]

thank you very much, glad it helped you out. thanks for watching !!

[@IvanPlayStation4LiFe]

This was epic awesome very good and easy to learn instructions.

[@BeachesBeTrippin]

+IvanPlayStation4LiFe thank you for watching !! glad it helped.

[@BS-ug5ei]

Perfect video sir. I'm working on one today.

[@BeachesBeTrippin]

thank you for watching !! glad it helped you out.

[@ksam10410]

Thanks for the video, you've done a great job. And now, how to make the screen itself, can you make a video for this? Keep up the great work!

[@enagroup4230]

Hi. It was a good video. 30x40 cm screen, you can tell me, please. But I do stolumu few centimeters? 40x60 cm carved on it, but I do not sit flat screen glad if you help me

[@kikejammer9804]

wow exelente muy bien gracias por compartir su exelente trabajo

[@vijaypalsingh9678]

good job sir..very very helpful this video and thank you very much.

[@BeachesBeTrippin]

I'm glad it helped you out, thank you for watching !! I appreciate that.

[@stealthes13]

Thanks for the video, definitely going to give this a shot this weekend! Couple of questions: - What size/length screws did you use (assume about 3" #10?) - If I went with turnbuckles instead of springs, would I just get a 4" jaw jaw and connect them to the eye hooks? - Does the quality of the lumber matter at all? Thanks for any additional help!

[@BeachesBeTrippin]

it's been awhile but I think they were 3 inch wood screws. I think the turnbuckles would be a better choice. the lumber should be 2x4's, you can use old ones laying around, just be sure they are 2x4's. I hope that helps. thank you for watching !!

[@stealthes13]

Thanks for getting back to me!

[@youshazaidi1180]

Nice Good Wood Work...plz update next video make build frame for P-Cap printing

[@BeachesBeTrippin]

thank you, I appreciate that !!

[@LouisDenes]

Great Video! Thanks for sharing. -Lou

[@BeachesBeTrippin]

@Louis Denes your welcome, hope it helps you out. thanks for watching !!

[@solicecajons1556]

Hi! thank you so much for this brilliant video. I have a doubt, i'm going to build the press to print on wood plates, so the thickness is way bigger than a t shirt, how would you suggest me to modify your progect? thanks again

[@BeachesBeTrippin]

depending on how thick your wood is you may be able to just re adjust the thickness by moving the screw up and down. hope that helps. thank you for watching !!

[@fmartinezjr0724]

Thanks this was really helpful.

[@BeachesBeTrippin]

you are welcome, glad it helped. thanks for watching !!

[@Shyams_Vlogs]

Could you please show the demo of makin 4 colour 1 station press ?

[@BeachesBeTrippin]

I have never done 4 colors.

[@fernandojuarez5936]

exelente vídeo y muy vien (expricados) solo una pregunta donde puedo comprar el cuadro

[@BeachesBeTrippin]

thank you for the kind comment, I appreciate that. Here is an updated video that will give you step by step instructions and all the dimentions on how to build the press. kzbin.info/www/bejne/jHvTmHSuebCjY7s

[@goodeveningeteven8694]

I appreciate the video very easy directions.. quick question what is that board you have to put the T-shirt’s on and are clamps easy to drill through or do I need a special bit thanks again

[@BeachesBeTrippin]

I'm glad to hear it helped you out, thank you for watching !! the board I used for the t-shirts was just a part of an insert from an old table, and the clamps were really easy to drill through, you don't need anything special, it takes about 15 seconds to go through.

[@REKSOSTUDIO]

your video is very good and very useful for me

[@BeachesBeTrippin]

I'm glad it helped you out, thank you for watching !!

[@rashidprinter21]

Brother, please tell me the length / width / size of the frame or screen you are making.

[@BeachesBeTrippin]

it's been awhile, but I believe it was 10 inches wide by 15 inches long. hope that helps. thank you for watching !!

[@RodderFiles]

i was one of them lookin for this, vut how do you make the screens?

[@BeachesBeTrippin]

StrtRodder100 I usually just buy the screens, I tried making my own screen but it was an epic fail lol.

[@godiswithyou3653]

Thank you, just made one 👍🏽👍🏽

[@BeachesBeTrippin]

awesome !! glad it helped you out.

[@alexacevedo4645]

Great video , thanks

[@BeachesBeTrippin]

thank you for watching !! I appreciate that.

[@eraimage3847]

Hello Amazon video may ask what about the table where the shirt go

[@BeachesBeTrippin]

thank you for watching !! I appreciate that.

[@SideTimeOne]

Thank's for sharing, Building one for sure's !

[@BeachesBeTrippin]

SideTimeOne that's awesome, it will work very well.

[@smrithyraj7842]

grate work sir

[@BeachesBeTrippin]

thank you very much, I appreciate that.

[@nokias686]

thanks you did a good job. pls can is use nail instead of screws

[@BeachesBeTrippin]

yes, you sure can, nails will work just fine. thank you for watching !!

[@genesiszapata9561]

thank u very much now i can make my own home made silk screen press stuff keep it up ur good works

[@ziambabu3913]

Nice vedio, Thanks

[@BeachesBeTrippin]

thank you !! your welcome, glad it helped you out.

[@laxminarayanyadav6169]

thanks Sir

[@RichardAxelson]

Thanks for sharing.

[@Tshepside]

My springs are pulling down rather than up, any idea why?

[@BeachesBeTrippin]

it may be in the way you have the screws set. you might have to adjust them.

[@Tshepside]

+wmfirefighter09 thank you let me check it out.

[@teddlogan9]

Thank you so much I'm making one as we speak

[@BeachesBeTrippin]

tedd logan your welcome !! glad the video helped you out. thanks for watching !!

[@TheMizzEducated]

Where did you find the c clamp with the holes can't find them anywhere

[@BeachesBeTrippin]

I bought regular c clamps and used a drill for the holes. thanks for watching !!

[@fifftygunz8777]

Screen won't sit flat when clamping down on screen...any suggestions please?

[@BeachesBeTrippin]

the screen won't really sit flat because you need that little bit of give so that you can lift off the print.

[@fifftygunz8777]

Ok thanks...I will build another, the first a did a slight modification because of that issue. works, but now I want to compare the lift you mentioned.

[@loretocostas7822]

nice. thanks sir

[@BeachesBeTrippin]

you are very welcome, thank you for watching !!

[@pradeep19741]

thankx good work

[@BeachesBeTrippin]

@Mithila Pradeep no problem at all, thanks for watching !!

[@s.vaithyanathans.v.nathan1110]

Mithila Pradeep m

[@BeachesBeTrippin]

thanks fd for watching !! I will have a vid up soon on how to actually do it.

[@dibax33]

Nice

[@BeachesBeTrippin]

thank you !!

[@laxminarayanyadav6169]

Sir can you send Hindi video pl