Presenting live to 3 cameras, directing from the the floor and then putting together an expensive PC while explaining every step in detail for 3 hours.... Good work man, keep it up!!
@theTechNotice3 жыл бұрын
🙏😇
@DGCastell2 жыл бұрын
as someone who built using this case, i can confirm this takes lots of skill. i can't even imagine streaming at the same time, great work!
@izys5602 Жыл бұрын
@@theTechNotice junior
@wojciechwojtaszak3828 Жыл бұрын
C
@ciscorey65202 жыл бұрын
This video proved to be invaluable. I just finished a 5950X // MAG X570 // 3080 TI Build. Followed every step and got a successful POST on my first try. Couldn't have done it without your help.
@luisangelini2220 Жыл бұрын
Hi there. Can you tell me what temps do you get as well what cooling system are you using? Thx!
@ciscorey6520 Жыл бұрын
@@luisangelini2220 NZXT Kraken x73. CPU is around 40-50°c when idle/light loads. Clock speeds up to 5050MHz. I haven't stress tested it; but also do a lot of gaming/3D modeling/editing/rendering and haven't experienced any hiccups worth mentioning.
@toptiktok7602 Жыл бұрын
In painting Da vinci, in science, Einstein, and in pc there is, you are really creative, creative
@johnfearn58832 жыл бұрын
Thankyou, my old pc just wouldn't cut it anymore for 3d, it was struggling. then it broke & been waiting for prices & availability Just upgraded and I see a lot of the parts I chose, you are using, makes me happy that I chose well. Love the content, and was great to see you use Vray benchmark on a video earlier. Great content.
@gilleschercuitte42553 жыл бұрын
Great video. Love your enthusiasm. You are the only guy on KZbin for three hour without driving me nuts. You use your time well and don’t talk with nothing to say. I’ve done my own setup with some changes: Case: Same, CPU: Same, Cooling: same, SSD: same but I added the heatsink, MB: ASUS ROG Strix B550-E, PSU: Corsair RM850 80 Plus Gold and RAM kit: G. Skill Ripjaws V DDR4 3600MHz 2x16GB. Substituted the MB for cheaper version but seems to have all the new standards: PCIe 4, USB 3.2 Gen 2, Wifi 6, BT 5.1, Thunderbolt ready etc. PSU good value and should be powerful enough. RAM kit very good specs very good price and PCIe 4 compatible. GPUs are too expensive at the moment so that will be an upgrade in the future. I’ll be reviewing your video when everything is delivered and ready to build. Are the power extension cable necessary or just short with the chosen PSU?
@theTechNotice3 жыл бұрын
They're only for looks, not necessary :)
@gilleschercuitte42553 жыл бұрын
@@theTechNotice what about the Sabrent heat sunk. Any experience with it. There someone on AliExpress selling a National Rog Raptor Rtx3090 GDDR6 24GB for 650$C. If you’ve heard of this part, is it legit. Right now this is an incredible price.
@victoralfonsoariasvanegas5892 жыл бұрын
OMG!!!! This is gold!, congrats, and greetings from Colombia!
@theTechNotice2 жыл бұрын
Hey, thanks!
@taitheguy852 жыл бұрын
Good thing I clicked on this. Wanted to see how u did the radiator. But I thought my case came with no hardware. Thought it was just HDD mount in that cardboard box, until I saw you open it. Duh! I was using old hardware & would've had to give my customer my aux splitter
@Belas_Photography3 жыл бұрын
Thanks for this instructive video. I just dropped serious cash on components for my new build. (It's shocking how supply and demand works in the PC world.) Best wishes.
@theTechNotice3 жыл бұрын
👍
@robertbodnar8745 Жыл бұрын
AIO manufacturer: -- We doesent present screws for installing, it must do the CASE manufacturer!.. Case manufacturer: -- What a heck... We doesent present screws for 3d party... AIO manufacturers must go with itself! (AIO mnft -- NZXT, Case mnft -- NZXT)
@Xewl Жыл бұрын
Don't turn on the PSU, it'll be grounded when plugged in regardless.
@outdoorsinontario3037 Жыл бұрын
Im starting my very first build ever in two days!!! Your channel has given me the know how and courage to build a 5 thousand dollar store bought pc setup for only 1400 dollars…. Seriously thank you so so so so much! I ordered a 13600k intel and a z690 motherboard and gunna go all silver and blue all over. I am so very excited to get started and try out this next gen cpu… I have always had a totally crappy computer and couldn’t even do any picture editing. But I need to do 4K editing… I know the 13600k has an igpu in it right, but I’ll be doing video editing on it with premiere at first and once I get the 3060ti in a couple months I’ll use DaVinci resolve. Is there any issue doing a bunch of video editing with just the i5 at first without any gpu? Or is it too much for it? But it should be fine for a few months until I get a 3060ti right? I am pumped to finally have a computer I can actually do stuff on with out it telling me that adobe products are not responding…. Or take 2 hours to load a fricken video. Thanks again dude! Serious inspiration coming from u! Thanks again n again Okay
@MenCanNotBeWomen Жыл бұрын
hope to god you changed that memory speed .
@SollomonTheWise3 жыл бұрын
Dude got the coolest Attic, I be beefed
@theTechNotice3 жыл бұрын
😇
@rapatouille2 жыл бұрын
gorgeous case! contemplating on H710i for my next build
@reg8288 Жыл бұрын
I know it an old video, but is it possible to direct me to the time when you connect front panel USB 2.0 to the MB, I have it connected but my USB doesnt work . AMD 5 5600X on a Gigabute B550 Elite Auros V2
@iKillborn2kilNOE2 жыл бұрын
Thanks I did my build with your video guiding me
@theTechNotice2 жыл бұрын
😉👍
@daledietrich27153 жыл бұрын
I'm wondering why you install your motherboards with the case standing up? Wouldn't it be easier lying the case down? An overhead camera could capture the install? Looks so much harder the way you do it.
@erwinwernars11232 жыл бұрын
more change to get schratches on your case.
@timotmon3 жыл бұрын
Keep an eye on this. After effects new Beta has introduced multi-frame rendering. It's going to make sense to use a CPU with a high core count again. Finally!
@theTechNotice3 жыл бұрын
Yes, you're absolutely right! :)
@LOKYMIR2 жыл бұрын
For real?
@ScratchBashing3 жыл бұрын
can I phone you tomorrow when I'm putting mine together?
@VinsysVlogs2 жыл бұрын
I badly need your suggestion. My laptop is almost dead and i am thinking to upgrade.. 1. Mac mini M1 8gb 256gb SSD 2. Custom built pc: i7 12th gen, 36gb ram, 500ssd, no graphics card Mac mini costs me $900 and the high-end custom built pc costs me $1400 which is exactly $500 higher than M1 Mac baseline. I am completely confused to choose between these especially with tight budget. I can just go with M1 Mac mini for now without burning my wallet but I wanted a future proof machine for the next 5 years for development. Please suggest.
@Jediknightcode Жыл бұрын
Just thinking air and radiator efficiency here. To my understanding, radiators work best by pulling or pushing cool air through them, so that the liquid running through their pipes are cooled by the cool air flowing through the fins. If the radiator is used on the exhaust, are you not pushing the warmer air from inside the case out through the radiator fins which is not giving the radiator it's best cooling effect? Plus hot air rises as is, wouldn't it be better to pull cool air from the front of the case in through the radiator and then exhaust it out through the top and out through the rear case fan?
@sijmengrunbauer76978 ай бұрын
I agree with what you are saying. I think having the radiator at the front is the ideal. The problem is that you should have the radiator hoses at bottom to prevent air being sucked into the CPU pump, and often in that configuration the radiator hoses are not long enough to reach the CPU, especially with a 360mm or 420mm radiator. For a 280mm radiator it should be able to fit in the front provided the case is wide enough. Note also that a 280mm radiator is as efficient as the 360mm radiator, if not marginally better.
@Jediknightcode7 ай бұрын
@@sijmengrunbauer7697 that makes sense for sure, if you’re having an issue reaching the CPU. My configuration is set up in the way that i mentioned and I was able to make the hoses face downward to have gravity work in the way you mentioned.
@icedalpha57942 жыл бұрын
Do you do any custom builds for creators, but with Intel CPUs? I'm trying to find a video I can follow along and learn how to build my first custom build.
@DarkNoggin2 жыл бұрын
Hey Great video! New fan of your channel spec-ing out my first custom PC (been a Mac guy my whole life). Does the H710 chassis come with the 4 fans, 3 front, 1 rear, it's hard to get the exact spec online and NZXT is telling me I have to buy the fans. Either way, great vids man!
@theTechNotice2 жыл бұрын
You'd have to buy the fans.
@DarkNoggin2 жыл бұрын
@@theTechNotice Thanks! I was thinking 3x 120mm for the front, does the rear have any blockage for a 140mm? I'm getting 5090x and RTX 3090 so the airflow is crucial.
@GENNARK10 ай бұрын
Great video. Who else watched at 1.75? Shoot me a like. 🤙
@EPlTETS2 жыл бұрын
You have 3 x 120 mm fans in Front (intake) and 3 x 120 mm fans at top (exhaust). That gives you neutral pressure. And you have another 120 mm fan at back (exhaust) which gives you overall negative pressure. That means more air will go out through fans than in, which means air will be sucked in through cracks etc. It means this air will avoid dust filters. What can you say about that? And why did you chose this approach?
@theTechNotice2 жыл бұрын
Not quite as simple. You can tune the front intake fans to work faster and the top 3 exhaust fans have harder time pushing air out since they have to push it through the radiator.
@aha65002 жыл бұрын
Fans don't work like that. It's not always 1 in+ 1 out = 0. Depends where they stand, is there a filter on them, how fast they spin, do the have room for their exhaust, to whichever side, or are they maybe choked...
@daledietrich27153 жыл бұрын
My compliments at how beautifully your videos are shot. I think Marques Brownly would be proud of you!
@theTechNotice3 жыл бұрын
😇
@johnhutchings60692 жыл бұрын
Yes i am Young to buld t but with a I5 12600
@Ahm7892 жыл бұрын
Would this not create negative pressure for the air flow because there is more fans pulling air out then there are fans pulling air in?
@theTechNotice2 жыл бұрын
Actually exhausting through radiator is much harder than just 3 intake so I guess it's roughly even, but yeah in ideal world positive air pressure is better ;)
@Ahm7892 жыл бұрын
@@theTechNotice So do you think i should buy the x73 or the x63 with this case then or not?
@scottymeuk3 жыл бұрын
Where are you from? I really can’t work out your accent. I keep hearing Dutch, but then also some northern English words/phrases ha.
@alexcoll6812 жыл бұрын
Just for asking i’ve you same radiator the kraken x73 it fits easily up the case? Sorry for my eng.
@Ramasenirama3 жыл бұрын
I never watch a 3hr vid before , thats a lot 😂
@gilleschercuitte42553 жыл бұрын
Great video. Love your enthusiasm. You are the only guy on KZbin for three hour without driving me nuts. You use your time well and don’t talk with nothing to say. I’ve done my own setup with some changes: Case: NZXT H701i CPU: Ryzen 7 5800X Board: ASUS ROG Strix B550-E (has every new tech but cheaper than your choice) RAM: G. Skill Ripjaws V DDR4 3600MHz 2x16Gb PSU: Corsair RM850 80 Plus Gold Cooling: NZXT Kraken X73 Drive: Sabrent 1TB Rocket 4 Plus NVMe 4.0 PCIe M.2 with Rocket Heatsink Just a few differences. I don’t know if I need the heat sink for Sabrent but figured it’s only 35$. I’ll will watch your video again when I’m ready to build.
@diegignho7456 Жыл бұрын
i did a similar build but with cheaper components
@soldierglider2 жыл бұрын
Is cool case sir ,is wow
@dg7438 Жыл бұрын
Why not talk about thermal paste?
@wyatt1880 Жыл бұрын
Can a 1200w PSU fit in this case?
@jeremymoon90882 жыл бұрын
A little of the old in-out
@luisangelini2220 Жыл бұрын
I have a 5900x with a RTX 3070. So basically I do lots of renders (video mainly) so temps is worrisome. Has anyone temps of this case? I'm worried about not having mesh at the front.
@theTechNotice Жыл бұрын
This case does not have good temps.
@noanyobiseniss7462Ай бұрын
WRONG, wrong, wrong! As all of you utubers have no clue how to build a system which is why you all hold your breath to see if you get a post.
@BabyTJ92 Жыл бұрын
Fix the damn ram speed
@3dpixel5832 жыл бұрын
Ehmmm. is it just me that think that there are too many tht probably shouldn't do when dealing with the parts and stuff? (Like scratch the AIO contact with papers and then only with non-woven clothes) Also, the whole process is awkward, untrained, like he's simply not used to building things? All elbows and knees in the ways. (Like installing into the case upright). T T Not a good example for new builders man.
@markus5953 жыл бұрын
Can this Build handle, 5,5k Raw Footage from the 1DX Mark iii without proxy’s Thanks
@theTechNotice3 жыл бұрын
If that is your goal I would not go with this setup. :)
@markus5953 жыл бұрын
@@theTechNotice which setup could handle this :)
@theTechNotice3 жыл бұрын
Depends what's your budget, if you can afford the Threadripper 3960x that is the best for live playback. If you're looking for a more budget option, I'd go with Ryzen 5900x or 5950x. And pair it with nvidia 3060ti or 3080. Send me an email if you want any more info :)
@odd1153 жыл бұрын
Is the 5800x good enough for a ending rig
@theTechNotice3 жыл бұрын
Stay tuned literally just making a video about it with all the benchmarks. :)
@louisc22533 жыл бұрын
Thanks for the video. Is it normal you have a 3600 mHz Ram and in the bios it's only showing 2133mHz Ram speed ? If it's not normal, how you can manage to fix this ? Thanks for the help.
@theTechNotice3 жыл бұрын
Enable XMP then runs at 3600 MHz ;)
@jimbrannan58252 жыл бұрын
I hope these KZbin people get back to computing real soon instead on building these Pimpmobiles.
@tomioka.67033 жыл бұрын
If it was sold at MSRP Scalpers and miners: Am I a JoKe To YoU?!?!?
@Huntorix2 жыл бұрын
just a few things that annoyed me "anticlockwise" its counterclockwise "earthed" its grounded
@theTechNotice2 жыл бұрын
Noted!
@trevorroberts9539 Жыл бұрын
It's anti clockwise in the UK
@odd1153 жыл бұрын
Editing
@srivid16283 жыл бұрын
Me watching this while I make $15 a week
@influencer14813 жыл бұрын
I know the feeling...
@theTechNotice3 жыл бұрын
Don't worry guys, we all started from somewhere. Don't be ashamed of small beginnings! 👊👍
@srivid16283 жыл бұрын
@@theTechNotice but in 5 months I’ll be building one
@rashidalmorisco83993 жыл бұрын
@@srivid1628 nice challenge, life is a challenge
@MenCanNotBeWomen Жыл бұрын
3 pin digital 3 pin very good... 4 pin crap. 4 pin no good... stay away from 4 pin's at all costs...
@YNWAxSharp Жыл бұрын
3 hours….. 3 HOURS!!! AND DIFFERENT FANS with some BS 3090 this is trash wtf
@ghostrangerp.88192 жыл бұрын
Using g words like I think tells you that he's not a technician.....