How to build a pole barn Part 2 | Installing roof and wall metal How to keep metal roofing square!

[@jpdunamislodge]

The extended mag for that gun is worth every penny. 9:45 👍🏻 I love mine.

[@desertmoonlightcottage3387]

Very cool, I'm glad I came across your chanel. I'm starting my very first 15x26 custom pole barn style cottage and noting how to install a drip edge was one of my concerns. Your instructions are very helpful.

[@T2423Ca]

Nail a gauge bloock on top of the truss on each end, let them stick out to whatever your overhang will be. Pull a masonry string line from gauge block to gauge block.

[@tch632]

Thought the horizontal boards were called "girts"? 🤷🏽‍♂️

[@Jefleopard]

Sides are girders. Roof is purlins.

[@michaelg4931]

@@Jefleopard No, tch632 was correct. The proper term is 'girt'.

[@FranciscoGonzalez-ro7ht]

These video-series is the one I'd choose to build my 24x32 pole barn garage; anyone with basic construction experience and common sense can tell that this building is solid and well reinforced. A couple question tho. what is the spacing between posts and trusses? where are you guys located? Thanks for posting this Coverage Contractors Team!!.

[@KoverageContractors]

Sorry about the late response here. We are located in North Idaho. I have to confirm with Kieth but I believe the pole spacing is 8’

[@mikezahnow1605]

Is that a 2x12 at the top for the rafters to sit on. My other question is the poles notched for the 2x12 to sit on the poles.I like this build

[@Bamaoutdoors]

Thanks for sharing! The one thing I was wanting to see is the trim at the top of the side walls and how to keep out wind and rain?

[@KoverageContractors]

I will suggest to Keith that he explains that in the next “how to vid” thanks for the question

[@Bamaoutdoors]

@@KoverageContractors Thanks sounds good I'll keep an eye out for it!

[@jackcody3102]

hi. I was wondering what the snow load rating is on this style roof?

[@highpockets82]

Lots of good info. Thank you!

[@KatharineMongrain]

Yall are awesome! Swear imma have to drag yall over to Montana to build my stuff 🤣😋

[@KoverageContractors]

We try to be :):)

[@debrajones7349]

You do amazing work!

[@KoverageContractors]

Thank you, Debra 🙏

[@Joe-oi6eh]

What gives your open end any sheer strength? Where interior braces added after?

[@KoverageContractors]

There is a wall on the back that gives it the needed sheer.

[@robertbutler8004]

I did not see one pole installed on this building I seen a lot of rectangular timber installed but no poles.so how can you call it a pole barn?

[@KoverageContractors]

Thanks for your question. This is part 2 of the series. In part one we set the 6x6 laminated poles. Does that answer your question?

[@WalkerHomestead]

@koverage contractors There is no part one of how to build a pole barn in the playlist

[@KoverageContractors]

Hi Ed. Sorry about that, it is in there now. Let me if you see it

[@yessi7718]

How can I see part 1 of this project to build a pole barn

[@KoverageContractors]

If you go to the playlist tab and select “how to build a pole barn” it should be there.

[@texasmadefisherman5133]

How far apart are the purlins?

[@KoverageContractors]

2’ on center.

[@nazarholko8059]

Доброго дня. Дякую, за інформативне відео. Яка модель та назва виробника вашого поясу для інструментів, та які ножниці по металу ви використовуєте для різки стальних листів ? Заздалегідь, дякую!

[@bobanmilosevic9541]

👍💪🙂COOL, TENK you.

[@rwg727]

The music makes it hard to hear what you're saying! why don't you use solid posts instead of three 2x 6's? Is it the cost or ?

[@michaelg4931]

Solid posts have a higher chance of warping/twisting than laminated posts. The individual layers of the laminated post counteract the potential warping/twisting of each other.

[@rwg727]

@@michaelg4931 thank you that makes sense!

[@LeninMAJI]

Hello. 🎉 how thick are your metal veneers?

[@KoverageContractors]

We use a 29ga metal for our roof and siding

[@LeninMAJI]

29 caliber. How many millimeters is it?

[@michaelg4931]

@@LeninMAJI Google is your friend. 29 gauge is 0.286 mm.

[@paulwatson2499]

You must have great balance. I'm surprised that OSHA hasn't been up your azz for not being tied off...

[@anshulchauhan8875]

how thick is roof?

[@KoverageContractors]

The top cord of the trusses are 2x6. Is that the thickness you are referencing?

[@spudth]

What are Girts?

[@KoverageContractors]

Wall girts are also what some term is purlins. Different terms for the same thing, just depends if you are on the east or west coast :)