How to Build a Simple SHED RAMP (Step-by-Step)

Grab my FREE Shed framing Plans ⬇️
atimprovements.com/modern-she...
In this video, I show you how to build a simple shed ramp. Building a Shed Ramp is not super complicated and can be completed pretty quickly. This step-by-step shed ramp building tutorial will show you everything you need to know so that you can build your own shed ramp.
There are many different ways to build a shed ramp, but this method worked for me!
For more information on How to Build a Shed Ramp, Check out my "How to Build a Shed Ramp Blog" Linked Here:
atimprovements.com/shed-ramp-...
I am creating a complete "Modern Shed Build KZbin Series". Below are the other videos in the series:
Introduction to the Modern Shed Series: • I Transformed my Shed ...
Shed Foundation Options: • Shed Foundation Option...
How to Build and Frame a Shed Floor: • How to Build a Shed Fl...
How to Frame Shed Walls: • How to Frame Shed Wall...
How to Frame a Shed Roof: • DIY Shed Roof Framing ...
How to Install Shed Siding: • How to Install Shed Si...
How to Install Shed Sheathing: • Shed Sheathing Install...
How to install Shed Trim: • How to Install Shed Tr...
Inexpensive Shed Window Option (Acrylic): • Inexpensive Shed Windo...
How to Install a Shed Window: • How to Install a Shed ...
How to Install Shed Siding Veneer: • LVP Flooring as Shed S...
How to Install a Roll-Up Door: • How to Install a Roll ...
How to install asphalt shingles on a shed roof: • How to Install Asphalt...
Be sure to subscribe and hit the notification bell so you don't miss any videos in the Modern Shed Build Series!
If you want to learn how to build the EXACT shed shown in the video, I put together "The Modern Shed Build Course" (bit.ly/3PeKr4V) which includes a materials list🧱, tools list 🛠, and cut list 🪚for each step of the entire shed build process. Basically, this course makes it feel like you built this shed alongside me! Every purchase helps support the channel!
Follow me on Instagram: / atimprovements
Check out my Blog: Atimprovements.com
Subscribe to my KZbin Channel ⬇️ kzbin.info...
🛠🧰 Below are the Tools I use (some links may be affiliate)
Composite Screw: amzn.to/3KIUkq6
Bar Clamps: amzn.to/3JjFrJe
Circular Saw: amzn.to/3BFotC4
Exterior Construction adhesive: amzn.to/3CqDoCT
Exterior Brad Nailer: amzn.to/3dBPqil
Exterior Brad Nails (amzn.to/3SSjGpa).
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Miter Saw: amzn.to/3Q71gik
Level: amzn.to/3HowUDn
Chalk Line: amzn.to/3MwSDg8
Jig saw: amzn.to/3I6lcyd
Paint Sprayer (for Siding): amzn.to/3bkuwn8
Caulk: amzn.to/3SugNe1

[@Deagoldpp]

Good design that I will probably use. I couldn't help but chuckle though at the trial and error approach to figuring out the angles, including the comment saying that it's not an exact science. Geometry is, in fact, an exact science.

[@steveo_o6707]

Just gotta do it now since it looked so easy for you!

[@lizlo8394]

Thank you . We are waiting for video release always . Great 👍 sharing

[@williamhrotko]

Great video. I cut the 8 degree angle on the ledger board too. Used the left over Trex to cover the two sides.

[@probablynot1368]

Good looking ramp, especially with the leftover deck boards. If using pressure-treated wood, I would probably coat them with paint or a waterproof finish with a bit of fine sand so that the boards aren’t slick in the rain.

[@petechabot8948]

Great series

[@carykern6079]

Very good!😃

[@3dartist43]

Can't wait for our new ramp to our new shed... !

[@TRella2000]

Another way is measure the distance from the ground to the door of the shed. To determine the length, figure out the rise and run. For example, if you have a 9 inch rise, cut the stringers at a 3/12 pitch which would give you a length of 36 inches- for every 12 inches of length, you have 3 inches of rise. You can then notch out for the ledger board and taper the end of the stringer to the ground. Concrete or even some bricks under the ends will have stability as well as blocking between the stringers. Many ways to get the job done.

[@09NOVATA]

Thank you I'll do mine🎉🎉❤❤❤

[@patricksmith3135]

Excellent ramp. I thought you would pour leftover concrete in wood forms or mathematically calculate the size, angles etc of the woodwork but you did it much easier and i see you worked alone this time.

[@rosewoodsteel6656]

Good job!

[@AndrewThronImprovements]

I appreciate it!

[@chief5981]

Nice work, and I need to build one before spring for my lawn mower. I paid 4K for some box store shed kit and it’s frustrating knowing that I could have built a bigger and stronger shed for that price or less

[@TheMopar97]

Yep. Tried telling my co worker that. I just paid $3750 for a 3 year old used shed delivered and leveled. It’s a fully insulated lofted barn, 10x20’. New would have costed $10k. Facebook marketplace!

[@GarnettLeary]

Thank you. Subscribed

[@AndrewThronImprovements]

Thanks for the sub!

[@stevenreichertart]

What a beautiful ramp, and thanks for the demo. Next, can you come to my house and make one??? 😂😂😂

[@ginamcguire953]

how far down from the shed base do you attatch the ledger board? to allow the doors to close?

[@TheVantriliquist13]

How do you get 1.5 inch for your "reference point for next step"?

[@jamesdavis6036]

This is a nice video. I'm ready to go with my just delivered Amish shed. One question. I'd like to use 2×4s for the joists. Is that what you used? Is that fine? Ramp will be 4' wide by 28" deep

[@AndrewThronImprovements]

Hi! I used 2”x4” for my ramp

[@dale7416]

5 minutes in so many ads, I can't finish the video.

[@user-hv9sg5pl8b]

WOW! You make this very simple project ridiculously complicated.

[@za-mazing2503]

Can you point me to a simpler video?

[@ourcountryacres4862]

Post a simpler method..

[@user-hv9sg5pl8b]

@@za-mazing2503 kzbin.info/www/bejne/gmXSnKJnaah9jNk

[@RamxRamx-fw3gm]

Why space?

[@chrisboynton8848]

Did you use 2x4 or 2x6?

[@AndrewThronImprovements]

2x4!

[@Hacketthairdesigns]

This won’t work with double doors

[@christripoli7020]

Set the saw up on a table lad

[@jamesdavis6036]

What size joists did you use? They look like 2×4s

[@jamesdavis6036]

Are they?

[@AndrewThronImprovements]

Yes all 2x4’s

[@agoffinet1034]

Scam

[@richie2dicks468]

Just use a speed square to find the right angle.