How to build a two pill HG2879 box, Clown style.

[@jessiec4128]

This is my first time watching your videos, and already hooked. I Love watching builds. I am very close to build my own 2 pill. Happy to be here.

[@brittoncorbin7144]

Please make a kit for sale!! Great work!!!

[@sponduli]

years of knowledge right here gonna finally pull the trigger on that mini leaf blower too lol

[@TechNineKOQ1152]

You forgot the snubing diode on the relay, even though it will work without it. It protects the relay and it will let the relay key with a real low dead key. Try it my friend.

[@28chicagovideogate50]

Awesome. Thank you sir. God bless and 73’s

[@dalebarnes2737]

It doesn't protect the relay, it protects the switching transistor connected to the relay coil. When the relay coil switches off it generates back emf current that tries to go back through the switching transistor and it will eventually stuff the transistor.

[@TechNineKOQ1152]

@@dalebarnes2737 Thanks!

[@hitechrr]

You make the best videos, on building a box.

[@homebrewguykc1atw268]

Thanks for sharing a great information. Is there schematic available?

[@Hammerjockeyrepair]

Love your work brother! But you cant put the output tune capacitor right on the antenna lug because when its in receive or off, the passthrough tune will be off. Solder it directly to the relay along with lengthening your output transformers winding 2 inches to reach the capacitor. The length in the manuals is just a general measurement for the original layout. Besides that Ive got no complaints with your work. Beautifully done!

[@JustinRuth-km4wz]

My bad 28 u came back and counter sunk great job.,...

[@OddBall1958]

We need to know if you can put a DIY kit together for sale with video instructions. That would be awesome. I have ten matched HG2879's. I also have eight matched Toshiba's 2879's and four matched Toshiba's 2510's. I bought these a long time ago when I bought my Texas Star 500 so I would have extra parts. Now it's time to learn how to use them. Thanks for the vid's and keep up the great work

[@worldradio456uk5]

The clown nose got me chuckling . Then the Giraffe just finished me of at the end.🤣🤣👍 Take it easy guys. 73s wr456 uk. 🇬🇧🇬🇧

[@hnelsoncollado2607]

Excellent video !

[@brandonprewitt5427]

Thank you so much for the video! Very detailed! I did miss the value of the resistor from the potentiometer to the input transformer and the values of the resistor and cap that make up the fly back circuit. I’d greatly appreciate it if you could confirm them for me please!

[@electromechanicalstuff2602]

100 ohm 3 watt for both and a 104 disk cap

[@andrewgeorgelang]

What value resistor did you put on, the top of the Potentiometer down to the input tune? Also when you removed the 100pf from the output section, where did you put that and why? Thanks for sharing

[@28chicagovideogate50]

That is a 100 ohm 3 watt. Sometimes we double them up to make it 50 ohm. Depends on the box. But that worked for that build lol.

[@andrewgeorgelang]

@@28chicagovideogate50 Maybe I'm not asking this question properly. I see a 100 ohm 3 watt resistor from potentiometer strait to ground. Another resistor possibly (Yellow, purple, gold, silver) going to the mica on the input tune. Shows it at 48:17 in the video.

[@28chicagovideogate50]

Omg. I stand corrected. You are correct. Why you ask me if you already know? Lol. I’m not to be trusted. I can’t even remember the name of things.

[@andrewgeorgelang]

@@28chicagovideogate50 only reason I brought it up. Is because people buying your amp kit and watching how to put it together would probably be questioning that. Great videos and channel. Take care

[@lucaelectronic]

Awesome video :) great work 👍

[@DarkStarRF]

It even worked at the end. Cool! Lol

[@minibikemadman]

what transformer do you use?

[@chevyguy1128]

Nice job

[@randolphmonhollen9997]

Nice video... Could I get a list of parts to try to build one?

[@beekeeper8474]

One day I'll make one

[@dalebarnes2737]

Just a suggestion to improve your builds :- instead of cutting the transformer copper links just use the dremel to grind away the copper leaving the fibreglass part supporting the transformer. This way the two pieces don't move when soldering them.

[@28chicagovideogate50]

👍

[@rondellschuyler7074]

What company makes the best cooling fans that push or pull the most air. Efficiency.

[@kastaways1259]

So how would you add in SSB delay to this ? Good job on the amp.

[@peakaboozen]

You should use a lot less of the thermal paste, its only supposed to fill in the gaps from small imperfections or scratches in the heatsink. It will hamper thermal transfer if too much is used and also bend the die of the pill. Check a used pill by sliding it on a flat file and notice where the file rubs to see if the die is bent from too much thermal paste.

[@bgorveatt]

You obviously need a dc power source. Do tell what you need to power the 2 pill and maybe the 4 pill also?

[@brandonprewitt5427]

And what did you change at the end to make the amplifier work? Lol

[@njdan301]

Do yall do repairs? And trouble shooting? I have a few issues with my setup

[@28chicagovideogate50]

Yes we do. You can call anytime to discuss. Thanks and 73’s.

[@clintmurphy5436]

Will the cap and resistor values, and the input/output transformers be different for 2290 pills? Keep up the good work, and thanks for what you guys do. 73s.

[@imagitu6409]

the one of my big questions has always been how interchangeable the values are between the various pills.... like say you have an old texas star with smoked red dots and you just can't get them.... can you drop mfr or hg in and keep rollin??? OR do you have to change all the cap values and rematch the impedance on all the components??? I am hell bent on learning all this but its a lot to learn and I aint there yet.

[@hitechrr]

It would be nice if a parts list with a link to the supplier would be nice.

[@FreedomRadioStation11]

I would agree some places need to sell kits for do it yourself

[@Hammerjockeyrepair]

@@FreedomRadioStation11 they used to sell kits but it gets them in trouble with fcc, gotta do the digging to find the parts list and diagrams, or have someone who is willing to share it with you.

[@DREDD11]

@@Hammerjockeyrepair fuck the FCC

[@electromechanicalstuff2602]

HG 2sc2878 Input transformer type 67 1/2" Input tune cap 150-180+/- depending on jumper length 6' or 12' Input transformer cap 330-390pf 500v 5% 1/4 w 10ohm *2 Flyback 3-5w 100 ohm & 104 25v *2 Output transformer cap1000pf metal Output transformer type 67 1/2"*1.5" Output transformer cap to gnd 120pf*2 Power choke type 43 1/2" 3 wraps Input gnd choke type 43 1/2" 3 wraps As far as the keying relay and circuit Gatekeeper has a video on the parts list

[@EricCarter-se7nx]

You Da Man, I can build one now providing you send me all the parts....All joking aside that was A-mazing from start to finish,,, 825 Dallas

[@geranwilson8813]

How much I would buy one of those

[@theamwindow]

type 43 or 61 ferrite on the transformers?

[@28chicagovideogate50]

61

[@majinboo75]

How much do you get for a 4pill or a 2 pill heater for a truck

[@JustinRuth-km4wz]

Snubs off the reley so it will perform and not hang and be stable keeps back up off the reley..best of luck .9,lb hammer

[@larryputnam7553]

Where do I buy a kit to make this? I have the power supply to run it I need a kit to build and install.

[@JustinRuth-km4wz]

U should Polish your heatsink counter sink your skrew holes

[@Catalyst-UDX-122]

Please sell a kit.

[@Catalyst-UDX-122]

That blower!!

[@JustinRuth-km4wz]

U need to use a diode on the rely aswell

[@shotgun1666]

What size and wattage is the pot?

[@hnelsoncollado2607]

How much for the entire parts to make one

[@jimsimpson4385]

open range! Bloody Free grazers!!!

[@28chicagovideogate50]

Nice

[@bgorveatt]

Frequency range of this amp?

[@kencannabisgrows7988]

how much to build one

[@hnelsoncollado2607]

Did you sell a kit for 1 pill ? And how much,thanks in advance

[@uniden613]

Is this still available?

[@ironhead320]

Can you buy this as a kit

[@beekeeper8474]

Parts list lol

[@mpedward2007]

only thing wrong with it is its not on my desk inline..lol

[@RC-Heli835]

Hey guys! I really enjoyed watching this build. I'd like to build one soon. I didn't realize a 2 pill could be done in 1hr and 11 minutes. The big dog is awesome! What kind of dog is that?

[@tangoalpha8381]

🏆🏆🏆👍👍👍🔥🔥🔥

[@daytonpyro]

2.13K subscribers plus me

[@28chicagovideogate50]

Haha. Thanks. 73’s

[@daytonpyro]

@@28chicagovideogate50 could i get a parts list and or a kit? and maybe a phone a friend., lol. also. what sort of power supply does one need to run a 2 4 6 pill? how many amps?

[@Centar1964]

Way too much heat sink compound...

[@frankskutnik5246]

😂 😂😂 That relay is way too big for a 2 pill your supposed too use a small micro relay that's why it doesn't fit also you need to keep the leads to inpute and out as short as possible no way around it with that case

[@bparker86]

should call this one "how not to build an amp" 28 style