How to Build an Easy Workshop Cabinet

[@TheRaven078]

I love how he seamless talks about his projects in both English and Metric units. He's still pound for pound (or is it kilogram to kilogram?) the best DIY video maker on KZbin.

[@ProperDIY]

Very kind of you to say that.

[@niwty]

“English” units? Do you mean imperial? To be fair I think its only Americans that use imperial measurements today. In the UK though we’re quite comfortable using both. Especially when we’re downing a PINT at the pub whilst complaining about the price per LITRE of petrol we’ve just paid to fill up the car that only does X MILES per GALLON! We woodworkers will also buy an 8x4 sheet of 12mm or 18mm ply or 2.4 metres of 3x2!😂

[@Shaun30-3]

I use both unit's we call it Welsh and Metric

[@markywellsboy2182]

I got a mate who will confuse me when relaying a measurement to me. "It's 640mm........plus a quarter inch!" 🤦‍♂️

[@phil2544]

He clearly swings both ways, metric and imperial

[@THusbands]

Best thing for cleats is to cut the width of 2x your cleats then make one 45 degree down the middle of the board. Great video as always!

[@LincolnHawk-bk5yr]

I see this comment all the time. Why does it matter how wide the cleats are? The only thing that matters, as far as I can see is that the 45s match. At that, I could hang a 60 on a 45 and it would never fall off. Just wondering why some people feel the need to be precise when it's not necessary. Or am I missing something? I'm not being a dlck, I really don't understand.

[@THusbands]

@@LincolnHawk-bk5yr one cut instead of 2...

[@LincolnHawk-bk5yr]

@@THusbands I get that. I've seen many videos where the presenter goes on about the importance that the cleat on the wall must be exactly the same as the cleat on the tool holder and I can't see why.

[@arkansas1336]

@@LincolnHawk-bk5yr...I agree, any angle above 20-30 degrees will work.

[@LincolnHawk-bk5yr]

​@@THusbands Thank you. It doesn't matter now though. I've already decided that the system is too much of a waste of wood for me. When I hang something, I never move it again, so using wood for the cleats and all of the tool holders don't make sense for me.

[@garulusglandarius6126]

Why this channel doesn’t have at least a million subscribers is beyond me. Excellent as always Stuart 👍

[@dannybaker2763]

Right? One of the best, most natural presenters on KZbin, who creates informative, instructional content with absolute clarity on the process. It is a brilliant channel.

[@moodophile]

My guess would be the muzak. Excellent information, well presented, but good god Stuart needs to use less early '90s Sky TV DIY channel music.

[@ProperDIY]

Thank you!

[@Shaun30-3]

I do enjoy watching Stuart, he makes DIY enjoyable and it feels like you are there with him and you understand when he explain thing's to you ,well what can I say I enjoy what he dose

[@dannybaker2763]

@@Shaun30-3 Absolutely. He is funny with it, too.

[@kmfkmf5305]

Thank you. You demonstrate and explain things beautifully! I especially like that unlike some, you don’t skip or miss out some of the important parts, so that even the most average of Diyer can follow along and achieve the desired results. After watching this and a few other videos, you a now my favourite DIY KZbinr. I only wish I’d found you sooner.

[@MadAsKiwi]

As well as the full range of sandpaper from 40 to 12000 grit, real woodworkers all have SawStop table saws.. lol. That is a cool wee project, and would be easily adapted to most needs depending on the size of someone's shop, and it is great to see someone keeping it real with their projects (not everyone has all the tools in their shed, and most people could make this with limited tools). Smashing work!

[@inflamable1977]

Nice one Stuart. You are a master. But maybe.... Some sliding dovetails,pocket hole screws,rebates,dados and a nice bit of shellac and your own homemade wax(the one you sell on etsy)would elevate the project etc etc etc... I love this channel,honest and straight forward. I need to make this myself and I will. Thank you

[@iancathcart3751]

When I first started using a table saw a good friend of mine who is a qualified cabinet maker and wood machinist told me don't use gloves. If the gloves get caught on the blade they will pull your whole hand in. The same can happen on a belt sander. Take care, love your videos.

[@DiHandley]

You really have built yourself an amazing channel Stuart. I always leave thinking “I could do that”, and quite often I do!

[@ProperDIY]

Thank you very much - my job is done!

[@David-bl1bt]

You would think in this day and age that french cleat "strips" would be available off the shelf, it would make a woodworkers life so much easier. A very informative, instructional, engaging and enjoyable

[@ProperDIY]

Thank you

[@marlinstudio.]

French Cleat originated from the origin of France when in the 1800s French shipbuilders began building wooden ships. Once the main ship was built, details were added. One detail was the French cleat hanging system

[@KevAsh]

Great video. When cutting the cleats though, could you not have cut 1 strip at 60mm wide, then set the blade at 45 and cut down the middle. Then you would have 2 bits that could be used for top and bottom cleat?

[@ProperDIY]

Yes but they would not necessarily be the same width - dependent on how accurate the 2nd set up is.

[@Mike_5]

If only there was a channel on KZbin that did top notch high quality Proper DiY?

[@ProperDIY]

That is very kind of you to say that.

[@danielgrabske3545]

Nice weekend project to get tour drill accessories organized and uncluttered

[@philquinn6375]

He always does project's that you can do in your own workshop/shed ,with the same tools, well explained and great camera work. Very good channel.

[@ProperDIY]

Thank you

[@MLFranklin]

Very cool. My grandfather had a similar design, except it was about 3' wide and 4' tall, and it had a few pages to it. It also had a heavy clasp on the side that locked up the whole thing to keep his tools safe and secure.

[@astridlehmkuhl6012]

I'm totally thrilled with your work! Your explanation is clear and simple ans also understandable for a beginner like me. Many many thanks

[@Foodie-yj1qe]

I don’t even have a garage, but here I am watching this 😅

[@ProperDIY]

Look at it as investing into the time you will have one!

[@gwarski]

Same here

[@thepharmacydesignchannel3655]

Brilliant Stuart, the French Cleat thing has got me thinking of so many things I can store in the workshop in a more convenient way. Thanks for sharing.

[@Shaun30-3]

Excellent project Stuart I made a cabinet like this about 2-3 weeks ago What I did with the one I made, the front of the cabinet I turned it other way so it closed in on it self to avoid dust getting in so both sides opened like a book As usual a brilliant video cant wait for the next one Take care mate

[@nigelmills7594]

I did exactly the same. Added benefits are 1) I can see everything when the doors are open (usefull when I can't remember where I put something) 2) my workshop is tight for space and I have 100mm more headroom over my bench with the doors openened back.

[@Dunc2222]

Makes sense. And I suppose you could then still hang some things on the front, if you chose to (yes, they would be exposed to dust).

[@christophereddy4517]

Hello from the United States! Just discovered your channel, and wow lots of good info here! I've got a spot in my basement that I'm making into a workshop and now I've got a solution for all my bits.

[@Quaker521]

"It doesn't smell French" 🤣🤣 Great video Stuart and a great project, I do like the idea of double layer. As always, useful information delivered with a nice degree of humour! Cheers.

[@ProperDIY]

Glad you enjoyed it

[@stephenweston1807]

Nice cupboard. I think I would have the two halves facing each other and maybe just hang a few thin things on the outside. Helps keep the dust out. I'll await Peter's retaliation with glee.

[@jibcot8541]

Great no nonsense video with plenty of helpful tips and some humour. Good job.

[@mickdownes9265]

Great video, I must make one myself. I think I might use the outer cabinet as a door so it keeps the sawdust and other crap out of both cabinets.

[@ProperDIY]

Go for it!

[@ucdailoi]

Dont forget that those grinder and cutting disks have a shelf life, as marked on the interior metal ring, after which they may disintegrate when used. So, for your safety, throw them out after the use-by-date.

[@thetessellater9163]

I went through a major box making phase about six years ago, after looking at the same few sheets of hardwood ply for many years before ! Long term record storage, CDs too, cabinets for some special book collections, like all my 'Observers Books', a box for my antique key collection, and others ! Never to such accuracy !

[@nas979]

Finally an English guy doing real stuff, I am sick of the American Hollywood one thausand of an inch measurements wtf.. You earn my subscription.

[@GoofyWelshGit]

Might scale up nice and hinge with a foldout support to make a mini workbench between the arches of my van. Seems simple and robust enough to be worth a shot. Thanks!

[@ProperDIY]

Nice one!

[@peterburley2086]

French cleats? Many moons ago I worked for a small company that contracted to build exhibition stands for clients who were displaying there wares at venues like Earls Court and Olympia. Most of these stands were only in place for a few days normally, so being able to break them down again quickly was important. Amongst other tricks in the arsenal was what we referred to as ‘split battens’ which are now commonly called French cleats. I have been using the system ever since ideal for hanging everything from a picture to a cabinet. Great video, keep them coming.

[@billmartin4446]

This video about your drill bit cabinet is really excellent and very helpful! That’s going to be a winter project for me, where I’ll also use your approach to build a cupboard or two for my hand tools. Thank you. 😊

[@TheShaker53]

Another plain and simple build from Stuart. keep up the good work...

[@mrspudly1]

Realy clever but simple design using the French cleats to hang stuff from, great video Stuart.

[@ProperDIY]

Thanks 👍

[@johnvodopija]

KZbin just popped this in my feed and I’m am super pleased. A nifty project plus I spotted your evolution tablesaw (fellow Rage5S owner here). Subbed! The icing on the cake is that you have saved me a fortune on sandpaper. I just went out and bought a shed load of sanding blocks instead. Cheers 👍😎🇦🇺 P.s. I laughed out loud at your “it doesn’t smell French” quote 😂

[@mcgannpster]

Only found your channel yesterday. Love your videos mate, cheers

[@jaimegutierrez5125]

Great idea, simple, practical and inexpensive. Thanks very much for sharing your ideas

[@GFYYT11111]

Great content, thanks for sharing💚🌍

[@kevinroberts9814]

Bob's your uncle! Brilliant little project.

[@k.hussain360]

I like the little Makers Central Salvage in the background.

[@davetay44]

That sanding block bit had me genuinely laughing out loud - love it. Another great video bud, keep it up

[@ProperDIY]

Thanks

[@bluecurlygirl]

Brilliant video. I was just thinking yesterday that I need a little storage cabinet for screwdrivers etc - all the little bits that get buried in tool caddies and this would be just perfect. Thanks Stuart.

[@ProperDIY]

Glad it was helpful!

[@tepidtuna7450]

The quality of that plywood far exceeds Australian suppliers. Very impressed with the project.

[@PhG1961]

Great craftsmanship and very enjoyable to watch!

[@sHrG78]

Great little shop project! You are hilarious! I had some good laughs. Thanks 😊

[@ProperDIY]

Glad you enjoyed it!

[@redcastle12b31]

The sanding pad is a very useful tool in my shop. And like you, it is within arms reach during a project.

[@SimonBurke-ny2qr]

Brilliantly explained and very easy to follow I’m so glad I subscribed

[@fus149hammer5]

I made something like that years ago. Our old house had the old style ugly fuse box just inside the front door. By the time I'd finished it had a nice bespoke varnished cupboard with a brass latch. Very nice 👌

[@valborchardt3596]

Thoroughly enjoyed that Stuart, thank you

[@GrumpysWorkshop4]

That's a brilliant idea. I've been thinking lately about drill bit storage & this may just be the way to go. Thanks Stuart great job

[@ProperDIY]

Thank you

[@markhannan5167]

I need this for my drill bits thanks the simple things in life are the best . Verry clear explanation as always

[@timdoyon1964]

When I started woodworking, I cut on the line. After a few years, I was cutting on one side of the line, or the other. Now, I decide whether I cut on either side, or split the line in half. Accuracy is everything, and if I don’t strive for perfection, who will? I’ll never achieve it, but perfection is always my goal. I also changed how I sand… the problem with sanding sponges is that they will always round over the edges of the boards. Even just a little rounding will force you to use filler, which is never a perfect match. If you want a perfectly flat board, use a perfectly flat sanding block, and keep it flat on the wood. Never try to sand out a blemish, as you will create an indentation that you will then have to address… (which will require more sanding). Hey, that’s my two cents… I enjoyed your video! ☮️ and ❤️ from a fellow woodworker in rural Oklahoma!

[@ProperDIY]

Thanks Tim! You are right about where to cut along the line - it makes a big difference. I don't always use sanding pads although I do like taking the **** out of my woodwork KZbin friends!

[@andyc972]

A pleasure as always Stuart, and a well thought out practical solution to a common problem ! Everyone loves a workshop project, I guess you'll be making a sanding sheet organiser next then Stuart ? 😉 I tend to think French cleats are over-rated and over-used but in this contained specific use environment they appear to be a sensible and practical solution, so thanks for opening my mind to them again ! My new weekly quiz, spot which "Error" or "poor practice" Stuart has intentionally included just to keep the "Smarties" happy and keep them commenting ! 🤔 Perhaps you could leave us some clues like the next frame showing you with an obvious new sticking plaster or some fake blood stains on the timber ?

[@ProperDIY]

Now you are one of a few who have obviously worked out the 'gist' of my videos!

[@patrickarchuleta9594]

Your work is second to none may God continue to bless you and your family outstanding job great attitude great idea. Bottom line

[@williamfotiou7577]

That’s really a great build, well thought out. Thank you.

[@3y34wah]

Hi , another great vid . Agree with ash could cut down middle for cleat and if you mark both even if your saw angle is out they will match for on board and hooked item . Also if your wall isn't square a couple of inset magnets would stop it swinging out and catching your head on when you're bent over underneath . OUCH , not that it's ever happened to me .

[@Quickhandlename]

The best and safest way to make the cleats is to cut your stock and 1/8 inch heavy, for example if your final dimension is 2 inch cut your stock at 2 1/8. Once you cut a few pieces at 2 1/8 then just 45 the pieces then cut them to size on the miter saw

[@adamstone4905]

Brilliant little build that one! Simple, useful, easy and nice to look at too! A nice bit of clear Perspex on the front with a similar hinge and catch would be great to stop bits falling out whilst getting to the rear unit!

[@ProperDIY]

Thank you! Cheers!

[@ahorton6786]

Brilliant video with lots of great explanations along the way. Makes me want to have a go at this myself, thanks.

[@k.hussain360]

Nicely done. Great way to organise Drill Bits.

[@SteveMonk1956]

Nice project Stuart, I know what my next project will be now. Just got to decide what I will put in it 🙂Thank you.

[@richardphillips3303]

As always another great video describing how we all need to DIY! Thank you 😊

[@somewhereelse3813]

Make it or not, great bunch of tips and experience here to draw from. Usual quality from an excellent creator

[@simonmiddleton4977]

Great video, great content and great humour what else do you need? 😃👍

[@ProperDIY]

Glad you enjoyed it

[@projectrebuild908]

Spiderman would be proud of those reflexes and the catch. They look great.

[@ProperDIY]

It was a close call!

[@andymiller8677]

Excellent stuff, I am building a workshop and have drill bits everywhere, so might give this a go!

[@martinhunt6004]

Great video well narrated Stuart. I have several drill sets also and finding them is difficult!

[@ProperDIY]

Glad you enjoyed it

[@shynebox]

Very relatable and achievable. Nice work, dude. Thanks.

[@martinwilliams9098]

Cool,I really like this idea I think I’ll make one the weekend Thank you for the video

[@iainfish4840]

Brilliant as always. But I’m getting a feeling you have had a fair bit of comment telling you what you should be doing instead of others learning from how you do it. Keep it coming Stuart - your videos are informative and entertaining.

[@ProperDIY]

Thanks. Yes, there is a lack of originality on YT so everyone takes the easy route!

[@iancoombs4324]

great job stuart will be making me some of these cabinets

[@essexbarnworkshop8578]

Great, another project to distract me from the stuff i need to do! I liked the brief look at the catch holding the door closed, I was wondering what I'd use as the wall it'll go on is barely straight.

[@ProperDIY]

Yes just a catch I had left over from another build.

[@David.M.]

Thanks for the project, very nice.

[@maddog1082]

Just wondering, did you consider turning the front box around so that it would close? It might keep things a bit cleaner, although you do lose visibility.

[@timandrew4515]

And then put cleats on that new "front" for even more storage (if you dont mind it a bit dusty).

[@johnfitzgerald4274]

Your nail gun seems perfect for light assembly. I was wondering what air pressure you need with it. I've just ordered a Silverline 18 gauge air nailer to use instead of the Rapesco electric nailer which has a kick like a servive revolver! and leaves the nail a couple of millimetres proud of the surface (unless you use both hands) . More anon.

[@michaelhollands3250]

😂 love it, like me nearly knocks thing's on the floor and still stands them up on end to try again later 😂😂😂

[@davesanderson707]

Great video Stuart, keep them coming , they just get better 👍

[@ProperDIY]

Thanks, will do!

[@niwty]

Yet another great video of a practical no nonsense project built with common sense and a brilliant sense of humour! 😂 Steve Ramsey would definitely approve.👍 Only one problem though Stuart. I’ve watched it! That means now I’m “inspired” to go into my garage/workshop, tidy it up (again) and sort my drill bits out when I’d really rather sit in the garden in the sunshine and enjoy a beer! Bugger. Ps. Did you know your “PD” sign on the wall is a bit squew-iff?😂 (Also looking forward to Peter’s response!😉)

[@ProperDIY]

To be mentioned in the same sentence as 'Steve Ramsey' is an honour. Sorry about the inspiration. Yes the PD is a bit skew on purpose - a bit DIY!

[@niwty]

@@ProperDIY 😂😂Should have realised! 😂😂

[@wardy2002]

Last time I bought piano hinge was 1978. As an apprentice welder making my toolbox.

[@NWGR]

Great job on this. I need to come up with something similar. All my different drill bits are just sitting on shelves. I really like the multi level approach. Well done. Subscribed. 🙂

[@trevhaydon5090]

Hello Stuart, Another great video, which I thank you for. Keep up the great work my friend. Lovely meeting you and your lovely wife at Makers Central last month. If I may, just an observation, and not a criticism, you could put a perspex door on the front to keep the dust out. And the disc holder in the back compartment could go on to the back of the front compartment if you ever started getting short of space on the cleats. Looking forward to your next video already 😁 All the best from North (ish) London UK.

[@ProperDIY]

Thank you - I'm glad you enjoyed MC. Yes, lots of different possibilities and prob things that I would change with it over time.

[@stanroberts541]

Could you show how to build a screen and windbreaker at the side of a house but it gets very windy in the winter time I no am expecting to much but I thought I would give it a try and ask love all your videos

[@r.d.1991]

Neat little project that was. Nicely done. 👍

[@ProperDIY]

Thank you! Cheers!

[@_wormlet]

Would love to know which compressor you use with the nail gun. Need something suitable for entry level diy

[@jmorv8866]

I THOROUGHLY enjoyed this video. :)

[@Litlight1]

Saw another video where someone explained why they are called "French Cleats" Apparently, it dates back to the days of sailing ships and French Ship Builders, where they came up with a sort of modular system for storing, ropes and other stuff off of the floor/deck in the ships to keep them out of the water when the floors were wet/"flooded". Don't know if that is true but that was the reason he gave for calling them ":French" Cleats.

[@thedj5914]

Superb Stuart 👌 one tool I need is a nail/staple gun !!

[@ProperDIY]

I would recommend it - just the cheap one I have is all you need

[@thedj5914]

@@ProperDIY I’ve got a load of old Oakwood 18mm flooring!! Ime going to use your planter video to help me along 👍

[@coreystock5361]

Love the channel. Love how you politely tell the accuracy nut jobs to take a hike. It’s not that big a deal guys. Relax.

[@awantamta]

A great idea and a very nice build

[@ProperDIY]

Glad you like it

[@netherwent2725]

Liked it - quick and easy. Just what I need!

[@ProperDIY]

Glad you liked it!

[@dannybaker2763]

That is a crackin' idea, ideal for a pokey little workshop like mine. Consider this idea nicked!😁👍

[@ProperDIY]

Go for it!

[@privatemerro]

This is awesome, and is definitely going to be my next piece to build. On a side note, are you related to Ian Dickson by chance? You look and sound a lot like him.

[@leeberry9666]

Nice video.simple to make

[@davidcollier9395]

Is that an Evolution table saw Stuart, great video, going to start on making your workbench in the next week

[@AJellySnakeRebel]

As usual I love the video, I would add it might be worth adding a lip on that bottom shelf to stop the bit falling out when you open the door, as it could (im not saying it will,) hit the wall or even as you stop the door the bits fall off. However, otherwise, actually something I might make because I know i need something similar.

[@genghisbunny]

I've always just cut the board in half at 45°, no waste and only one cut. Just have to calculate the middle accounting for the depth of the piece.

[@deanmcclusky9955]

Brilliant idea

[@domenicfp]

I love it and thank you.

[@uhN0id]

Hey thanks for the video! I'm in the process of organizing my shop so it doesn't feel like I'm working in a 6yr old's playpen. What is that Mac 90 degree angle tool you used called? I would love one of those! On that note, some feedback! You should list the tools you use in your video description and even better use an affiliate link for each one so if we click your link for the product you get a commission!

[@Gaz_does_stuff1969]

LOOKS ACE

[@Edsbar]

I love the skit about sanding blocks but according to Robin Clevet Woodworkers use blade and decorators use abrasives.

[@cliffcarlo180]

Nice build as usual Dave. Well done again👍👍

[@ProperDIY]

Thanks 👍