How To Build Any CNC Cable Using A Template

This video covers a content creator working with a CNC cable, an my template method for following best practices. Please use extreme caution when following content creator videos.
Please due your research before following any content creators video as the content they produce are for entertainment, and best practices are seldom followed, or understood.
If you have questions, or require quotes please message me direct at [e-mail] or through my eBay store here. www.ebay.com/s...
Below is a link to my soldering components that support the issues covered in this video.
Kester #44 Rosin Solder & Kester 186 RMA Flux, Heat Shrink 3mm,6mm,1/2in Pro Kit www.ebay.com/i...
Kester #44 Single Tube Solder & Kester 186 RMA Flux & Heat Shrink 3mm,6mm,1/2in www.ebay.com/i...
Kester #44 Rosin Solder & Kester 186 RMA Flux, De-soldering Braid & Heat shrink www.ebay.com/i...
Here's the link to the Yihua 995D+ Soldering Station Package www.ebay.com/i...
Here’s the link to the Yihua 908+ Soldering Iron Package www.ebay.com/i...
Here’s the link to the Yihua 200C Automatic Tip Cleaner www.ebay.com/i...
Custom cut heatshrink in whatever size you require along with whatever quantity you require to streamline your builds. Please message me your requirements.
CNC components are listed below.
Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H www.ebay.com/i...
CNC Ground Buss Bar System Complete With SC25-8 Terminals And 2Ft. Ground Strap www.ebay.com/i...
CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Here's a link to my Ethernet Smooth Stepper turnkey package www.ebay.com/i...
Here's a link to my UC-400 Ethernet Turnkey Controller package www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/i...
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/i...
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/i...
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/i...
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/i...
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/i...
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/i...
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/i...
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/i...
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/i...
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology

[@jessiezhao8742]

Recently done a similar job myself, can really appreciate the tips given and the necessity of these careful techniques! 💖

[@corvetteguy50]

Thank you for your support. I hope they help my viewers. Vince

[@jessiezhao8742]

@@corvetteguy50 Thank you for sharing!!!

[@corvetteguy50]

You bet...:) Thank you, Vince

[@cd7140]

Wire wisdom with Vince. Good info to help with making quality connections. I appreciate you sharing.

[@corvetteguy50]

Thank you for your support as always! Vince

[@orsu2001]

ART ❤

[@corvetteguy50]

Thank you for your support. I really appreciate it, Vince

[@TouChA0]

Thank you could you share with us websites make a prototype for project thanks

[@corvetteguy50]

What project are you you needing to make? Thank you, Vince

[@TouChA0]

@@corvetteguy50 I just asking i saw your soldering PCB support and i am who thank you

[@corvetteguy50]

Well, thank you. I don't do a lot of PCB work myself. Thank you, Vince