How To Build Color Match Projector Headlights Like a Pro | F250

In this video, I go over how to build a custom set of color matched headlights. I go over the steps it takes to take them apart and then also put them together once they have been painted to your liking.
HEADLIGHT PARTS BELOW:
HEADLIGHTS: amzn.to/3V8Y3AP
PROJECTORS: amzn.to/3W9iLC4
RGB HALOS: amzn.to/3Wpa1r6
RETRO RUBBER GLUE: amzn.to/3Wai638
LED TURN SIGNAL STRIP: amzn.to/3WtstPn
HEATGUN: amzn.to/3FDr0zg
WIRE CONNECTORS: amzn.to/3FDVvFl
NEED NOSE PLYERS: amzn.to/3PElmBi
#customheadlights #colormatchheadlights #projectorheadlights #jtxforged #americanforcewheels #26x14 #24x14 #26x16 #tuffwheels #28x14 #tiswheels #37inchtires #roughcountrylift #myrtlebeachnationals #nopitruckshow #daytonatruckweek #lifttruck #squattruck #loudexhaust #dualpipe #12inchtips #4x4 #mudding #truckmudding #off-roading #mudhole #2012yukondenali #gmcyukon #truckforsale #mustwatch #viral #forgedwheels #Liftedtrucks #Squattedtrucks #Leveledtrucks #Carolinalift #Loudexhaust #Loudpipe #Straightpipe #F250 #YukonDenali #HarleyDavidson #30inchrims #26x14 #26x16 #26x12 #24x14 #24x12 #24x16 #Shorts #Myrtlebeachtruckweek #Daytonatruckmeet #Truckshow #Truckmeet #Semashow #newtruck #f250platinum #diesel #Rickrosscarshow #rickross #carshow #carmeet #powdercoat #powdercoating #Lifted Trucks #SEMA Cruise 2021 #Lifted Trucks SEMA 2021, #SEMA Show 2021, #SEMA Ignited 2019, #SEMA 2021, #Road Armor, #American Force, Fusion Bumpers, #Air Dog, Big Dawg Status, #SMG, #Nexen Tires, #RBP, F250, #Hot Shot, Horn Blasters, #TIS Forged, #DropStar, TIS Off Road, #Tweeters Tire, #Rolling Big Power, SEMA Show, #diesel Brothers, #fast n loud, #kelderman, #2020 chevy 2500 hd, #2020 ford bronco, #2021 #ford bronco, #best of show, dirty 7, #sema 2021, #sema show 2021, #lifted trucks sema 2021

[@davida375AI]

Looks great!!!

[@thekolbyward]

Thanks brother I appreciate it!

[@holtonwilson6425]

What did you bake the lights at to take them apart

[@thekolbyward]

300 degrees for about 10-12 minutes I believe

[@coreyw199]

So you didn’t adjust the top projectors? You just installed them and tightened them down?

[@thekolbyward]

I messed with them off camera before I ran the bead of rubber around the lens and sealed them.

[@leovulpes4917]

Has the paint held up? When I did my headlights the paint started bubbling after a few months because of the heat from the projectors. Next time I'm just going to use high-temp engine paint

[@luc1f3r0_mf7]

I learned anything near a heat source just high temp paint or powder coat (it holds up well to heat after the first bake)

[@thekolbyward]

I’ve had no issues so far luckily to be honest. Could be the thickness of the clear coat the guy sprayed

[@timowolf4745]

Hi quick question did you use the same projectors for the normal lights and high beams ?

[@thekolbyward]

Yes sir. I used the same high beam projectors and made a dual plug wiring harness that plugged both projectors into my high beam plug in.

[@timowolf4745]

Could you post the link to the dual plug possibly or did you make it yourself

[@timowolf4745]

And how much did it cost you I’d assume in US dollars right

[@thekolbyward]

Everything ran me about $600-$800.

[@ryanh0190]

What glue are you using to seal back up? Link? Thanks

[@thekolbyward]

amzn.to/42novM1

[@timowolf4745]

Hi question where did you get the shrouds if I could ask

[@thekolbyward]

theretrofitsource.com

[@johnysik7361]

how did you wore them into the oem wire harness ?

[@thekolbyward]

i made my own dual high beam plug and play wiring harness

[@johnathangarcia1719]

@@thekolbyward any example on how you did them?

[@onecleanplatinum8434]

If I had a dollar for every time you said “like I said”

[@thekolbyward]

You’d maybe have $20

[@reecemorgan4300]

what lift height is on your truck?

[@thekolbyward]

13 inches tall

[@ColbySmeltzProductions]

How those Amazon strips holding up? I’m scared to seal them and they start flickering

[@thekolbyward]

the strips are holding up fine actually. I used 3200 marine sealant and haven't had an issue yet!

[@gabrielnunez4870]

Can you tell me the exact projectors you got?

[@thekolbyward]

mini Hb 1

[@gabrielnunez4870]

@@thekolbyward and what led strip did you use and which halo? From where?

[@johnruiz2609]

The link in the description goes to a hid/ halogen h1 bulb style projector not the same you used the true led projectors so maybe we can get the true link 😂

[@thekolbyward]

go on theretrofitsource.com . I only put that link because some people would rather go the cheaper route. A lot of this stuff gets very expensive when you start building your own projectors.

[@vermili0n]

Bro really had his projectors rolling around inside of a droor unprotected and on top of tools and CDs 🤨 yikes.

[@thekolbyward]

Imagine commenting something you have no idea about… yikes lol. The projectors literally got put there 2 minutes before I started the video and were mocked up on the headlight and taken off so I could show and explain. Didn’t know people would have “CDs” in a tool box… Thank you for your comment and view though 😎