how to BUILDING DIVE

[@marcoasqmartins]

Seeing cool pilots like you diving buildings is what got me into the hobby so this tutorial will come in handy. Keep up the good content Drew. Big hug from Portugal

[@Tyoung152]

This was great , the noob section applauds and thanks you. No such thing as a perfectly harmless tree. I’ve been on three ladders in the last year to try to floss out a drone eating tree. A stick cam would be helpful but your narration is so helpful

[@katherinematchura9602]

Thank you for the awesome tutorial! We do not have any empty building here to learn on. We do have a few quarries that might be fun to learn in.

[@daleleblanc8115]

Thanks Drew. Your building surfing is probably my favorite move that you do.

[@PeterKornum]

Diving has always had the wow factor for me, but what really impress me is the “hang time” you can get from a low building... you can make it look like slow motion! THAT IS TRUE SKILL.... the way you can almost put the quad in reverse blow my mind.... I try being at the apex at idle/air mode but still I’m going towards the HARD STUFF at lightning speed!

[@MudflapNichols]

Interestingly enough, I was just on my way to dive a building! Thanks! 🙂 And I'm fairly certain that was a solder sucker. 12:19

[@HarleyAssi]

Hey Drew, I hope I can help for once: Its old as fuck, but at 12:30, if nobody told you yet, that thing is used to remove soldered metal. Like it sucks the molten solder away, when you push the release button.

[@thaddeussargent]

Hey drew I loved the video. Great dive demo too! Just an FYI that silver and blue tube is a solder sucker, you push the plunger down on the device - heat up your extra solder or solder joint - get the plastic nozzle close to the liquid solder(preferably while the iron is still on the joint) - push the button on the side of the device and it should pop to vacuum the extra solder into the tube to trash later. Keep up the awesome vids man and thanks for all you do!

[@johncgibson4720]

I like your term "building dive", more fitting than rotor riots "freestyle trick". Dive is a verb that puts the craft's characteristics to the test. And you are an action adventurer. Freestyle is a adj and a noun, which are just there not acting.

[@ol-man-duffyj688]

That's a solder sucker. They work awesome for pulling the bridged solder between board pin holes. Try it. Wet the solder put that tip close and press that button. Works good on bee strings to for sucking that venom out before you stab the epinephrine in that thigh! 👍🏼😉

[@highquad884]

Ol-Man-Duffy J Wtf? Does it really work for bee stings?

[@ol-man-duffyj688]

HighQuad: yeah! It's not a perfect fix but if you put it on there in under 2 min it will drastically reduce the swelling and healing time. 😊 sucks out the venom and a few white blood cells at the same time. 👍🏼. They actually make larger versions specifically for snake bites.

[@highquad884]

Ol-Man-Duffy J Thats cool! I will try this on my next bee sting (if I have a soldersucker nearby).

[@hankd8214]

You are the best of the best at showing this kind of moves for us -- thank you so much -- keep up the great work

[@djchazfpv2632]

So jealous! I ran out of CW props today! I dont know how that happens. Now I have to wait. DREW ...I need help with antenna management. My zip tie shrink wrap receiver wires take a beating.

[@petwog]

Drew, you make the best vlogs/vids whatever hands down! What a talent! Such editing skills and you tell a great story. Keep entertaining us!

[@gorace71]

It is a solder sucker they work great. Took me awhile to get used to your style but this tutorial was really well explained I have not tried a building dive yet because I did not know the mechanics of the trick great explanation thanks drew I will start low and build up. One more thing your vids are always so much better when Ashley makes an appearance. Keep em comin

[@gedgar2000]

Great teaching Drew!

[@josephboehlke6368]

The blue thing is a de-soldering vac thingy, what you do is you push the plunger all the way down, heat up the solder you want to remove, hold the tip to the solder, push black button to release plunger, suction carries it way.

[@checkeredflagfilms]

9:28 Pitch Back/9:37 Pitch Up. Which is it? Which is correct?

[@muchthump]

"Glass has to be cleaned anyways, so..." LMAO!! Le drib, you're hilarious. In a good way, I mean.

[@ehlrobbo]

Great video :) Suggestion; can you fix the focus on your camera? I don't know if you realise, though you're constantly going in / out of focus as the lens adjusts.

[@BobbyMeeks]

Wow... unreal flying

[@metoo3918]

6:36 Looked sloppy? That looked freaking cool. I havent seen (not saying it doesn't exist) anyone dive a building upside down with rthr camera facing the video. Tgat would be awesome, especially with a late pullout. Sounds like something Cricket would do.

[@scottmarshall6766]

Sure, day old video, see how you are... Good tutorial - perfect timing for me. been sim diving, and can't seem to get in tight. Great explanation, you make it seem so much simpler than it feels if you just have at it. My brain isn't used to staying nose down, so I have no feel once I pitch in. Your explanation helps a lot. You do great tutorials - I'm always glad when you upload one, even if it's not fresh... Enjoy your new solder sucker - got the quad box myself - I've been getting it for 4 months, and it's always been worth the 50bucks, but some of the tools are a tad on the cheap side. Minor point, I recommend it to anybody that flies much. Love the shirts & I've got lots of new props to try in the spring... Not many bandos around here, especially diveable ones, but I'll find something to crash around... Thanks for a great tutorial.

[@dafadashamsta]

So damn jealous! Want that iX12! Gotta keep saving. Love your videos.

[@PlumbCrazy1]

Perfect building dives is what I've been working on lately

[@David__]

Thanks Drew... You make it look too easy!

[@hoonyfan2924]

Okay, the smooth dives are a favorite but, I really want to see one of you crazy pilots go for a huge dive without pulling away from the building and bringing the drone to a nice gentle bit fast landing. It would be so crazy to see a smooth stop right at the very base of the building. Love these older vids Drib. I revisit them often. Cheers

[@sxdev]

It´s an unsoldering pump, I can´t believe you´ve never seen that :D

[@ramsberg2]

@@jamesrostie4784 Yep it definately sucks at soldering.

[@MrSmithFPV]

It can help a lot! In German it's called "Entlötpumpe" 😅

[@G-FORCEEE]

That's so funny he didn't know that 🤣 Most cheap beginner electronics kits come with one.

[@mikeoleksa]

The old Lee Plaza building and Detroit Collegiate Prep on West Grand!

[@Wildicon19]

Hi Drew, this was an amazing tutorial, your explanations were clear, detailed and precise! I like how you build the audience up for the execution of your dive! I really appreciate your respect for the FPV community with your explanations on what to look for when looking for a place to fly. Your Editing is top notch, keep up with the amazing content!

[@rednoxmtb]

Thanks for the class. Keep it.

[@jameskoonts6512]

Up to code building glass is shatterproof, so you can't fall through it, throw a chair.. etc

[@insanesurfer23]

FInally you got the IX12 LOL ... ive had it forevery its frikin AWESOME YOUR GONNNA FRIKING LOVE IT!!!

[@zoroe]

Can the same technique be used for diving muffs? Asking for a friend (Botgrinder)

[@JoeMaxFpv]

zoroe it kinda works. Just don't poke her in the eye when you invert. Lol

[@tolstoymanor]

Thanks for the great video. Would there be a chance you could do a tutorial on a regular split s? I am working on them at the moment but would be great to know how to get them nice and smooth. Keep up the epic work on the vlog

[@imaslowlerner]

Great video, thanks for all the links. After this Corona problem, you should give classes, maybe once a month one day class ten students per class.

[@andreelb]

I LIKE YOUR VLOGS LEBRIB THIS ONE CAME OUT TE DAYH AFTER MY BRTHDAY SO ITWAS LIKE A COOL LATE BIRTHDAY PRESENT

[@Theo-dj7vs]

So he does not build his quads ie solders boards? (12:30).

[@Theo-dj7vs]

No he just solders clean ;) like his corners.

[@M1America]

You're holding out on us Drew, you know we all want to dive buildings!

[@danfrese4409]

Great tutorial. More please!

[@DroneyMontana]

Cool tutorial! I need this when I was in CO. I sat under an awning so I lost video before I reaches the top. I was still a lot of fun tho.

[@HomeGrownCanadianFPV]

I knew our snow went some where... rare break for us plus 14 ;) n sun.... sorry you got it brother.... gone for good soon.... sweet video as always

[@mikespeedyfpv321]

Really educational video love the channel 👊

[@mattrivers1079]

Perfect! I love this kind of video , very helpful!

[@mavenfpv7843]

Awesome tutorial! Simple and entertaining! 😎👌🏼 keep them coming!

[@Goludan]

Living it up at the hotel bandofornia

[@HarleyAssi]

OMG, I love that I am not the only one going extra miles for zip ties in the right color ^^

[@S700KYFPV]

Thank you for the tutorial. You always make it easy to understand

[@rcmonsterdude]

so jealous of the IX12!!

[@hateeternalmaver]

Thank you very much for this nice tutorial, Drew. The going-over-the-roof part is really scary, but looks so cool. Also, when you were explaining with the quad in your hand I suddenly heard: "Spider drone... spider drone...." singing in my head. ;D

[@Mk4Thumper]

Great explanation of an intimidating trick!

[@alscottpool]

This is my old high school nice great video

[@KittFPV]

freaking love building dives :P my first was the UP headquarters hehehe :D ...just wish I had more opportunities to do them but rural living means there aren't many buildings to dive. Great tutorial! 12:20 lmao

[@dronereviewman9580]

Yeah i haven't tried this either but man it looks fun great post!! Great dives lol. 👍👍

[@juliusdronevideos3562]

Nice video, but could u maybe explain how to flip the drone down so that the Camera looks straight down ?

[@spacecowboyfpv5511]

I love diving buildings! Too fun. Great vid drew

[@DavidOwensuk]

Great video, love the tutorials... The sliver object is a desoldering pump;-)

[@Gio-un4wh]

Great video thanks 👍👍👍👍

[@revepix]

What drone do you need to do building dives I want a complete set

[@ShadrikEaston]

out of interest.. i haved an x140 type drone... its kinda zippy... would you suggest zero prop spin at zero throttle ... or to leave a little spin to add control.. its contentious i know.. i just wanna know for me :p cos im ive just started learning to properly acro/rates

[@coldspringhead]

You fly it like you stole it. So impressive.

[@Padoinky]

As an “old guy”, I had no idea that this was “a thing”? Way too cool

[@StephFPV]

Stepping up the tutorials and editing man! Imma find an abandoned building and try this haha

[@unclebuck5957]

Great video

[@Nashid77]

Ha... my old high school. C/o ‘97 (damn, I’m old).

[@jManraM]

3:38 damn this gonna be a problem for me because my pull out game is weak hehehe

[@MPQuads237]

Enjoyed. Now I have to fined place to practise.

[@gelliot8156]

Thanks!

[@TT_R89]

Thanks for making this video. Asked stingy once and he came up with some self righteous comment that he didn't want to teach anyone how because he didn't want people trying it. I did it anyway, but it would've helped to get some guidance.

[@LeDribFPV]

I'll kick Kevin for ya next time I see him ;)

[@TT_R89]

Le Drib hahaha thanks man! :D

[@michaeljohnson6473]

I am just starting to fly FPV without making dumb mistakes.. I have to learn how you got started the split s into the dive like that.. I can power loop in open air, no obstacles lol And split s (kinda) in open air, no obstacles And that’s it!! LMAO. No other tricks yet.. But I am putting in the time and effort to be successful... You make it look so F****ng easy!!

[@chasesfpv3537]

Awesome tutorial as always so smooth..thanks man 👍

[@damonbfpv]

that solder sucker is the same one i use to have ,it is absolutly crap .throw it away ,soon as you press the button it dismantles its self into pieces lol

[@StormadoMan]

"Yeah here we have an abandoned multi storey building to dive, hey thanks for the free radio Spektrum" ..... The 1 Percent...... 😉

[@Mosmixer]

Great video mate

[@LuukBilly]

Is this finally another le drib tutorial?

[@BrokenanklesFPV]

Ok so what’s up with the blue dot on the back of your head drew ?

[@gypsypunkparty]

Why didn't you put this on Drib 2? Love your tutorials!

[@cobra4829]

SOLDER SUCKER exactly the same for the first time I used about 32 years ago

[@robertreitz5554]

It's a solder sucker but the ones with the built in iron (IMHO) are so much less frustrating.

[@jjooyycc33]

tool is for removing solder usualy for THT holes for pads is beter soldewick

[@adrianquirino]

hell yeah review of ix12 and if have problems...

[@gee4zfpv]

steering on the way down- only yaw?

[@manuelsmeets9392]

Le Drib Just a quick question. What camera angle are you flying with? and do you change it or always fly with the same angle?

[@rmdcade1717]

1:14 DREW LOOK OUT THERE'S A SNIPER WITH A BLUE LASER SIGHT POINTED AT THE BACK OF YOUR HEAD The office portion of the video was especially snappy and humorous. You must have been in one heck of a good mood. :)

[@SweetThangMedia]

Drew, I just noticed the 2 lil color test dots on your hair @ 1:14 LOL

[@andrewzaborowski9685]

Ooh I want one of these propwash t-shirts! 12:30, come on, that's a desoldering pump, very useful indeed. 2:00 cue in a 9/11 video (sorry, downvote me)

[@leoc4]

Andrew Zaborowski 😂😂

[@clnfreakone8486]

Love your videos ..Can I have your old radio? 😁

[@vikrambhamre5512]

What about a tiny whoop. I have tried and I use the project mockingbird tune with crazepony insane motors but still I can't get out of the dive bc of propwash. Please help

[@DonnieDagley]

Lol

[@bereal1251]

What antenna you use on the quad?

[@HK_Martin]

looks like a stock rubber duck antenna

[@ewantheboat]

What should I do in Britain which has almost zero abandoned buildings full stop

[@jacobshepherd3997]

Ewan Big Ben

[@jacobshepherd3997]

Jkjk

[@shlokdhareshwar6936]

Can someone please help me.....while diving,do we have to keep the throttle on to control the quad?Pls Answer

[@jq71]

And now armed with knowledge I'm off to break some parts.

[@bereal1251]

Gravity Wins lmfao

[@rebelquadronfpv1065]

Some? 😂

[@mike20h]

What VTX antenna do you have there?

[@eustormmap9831]

Solder Vacuum for Desoldering :)

[@NicktheBuffer]

Awesome! really useful man

[@josiahgarrison647]

can you do this with any drone?

[@Juicyfpv]

Yayyyy more drib!!!!

[@tlee9484]

I love boxes in the mail😎👍

[@cre8tivity06]

Is any of this possible with a non fpv drone?

[@PeterKornum]

That popo will save my fingers at some point.... there is always that “one thing” you don’t think you have to remove your props for, (yes I’m lazy the stupid way) that will probably go “will it blende” on you!

[@noobFPV]

Harmless tree ?? Those things eat drones ! :D