How to change a front shock strut on BMW 1 Series E82 [TUTORIAL AUTODOC]

How to change a front shock strut on BMW 1 (E82) 3 Coupe 2007-2013 [TUTORIAL AUTODOC]
Shock strut on BMW 1 (E82) Convertible (E88) (03.2008-12.2013) / BMW 1 Hatchback (E81) (09.2006-12.2011) / BMW 1 Hatchback (E87) (03.2003-09.2012) / BMW 3 Saloon (E90) (06.2004-12.2011) / BMW 3 Coupe (E92) (11.2005-12.2013) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
All video and pdf tutorials on BMW 1 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/bm...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Springs: www.autodoc.co.uk/car-parts/c...
Springs for BMW (E82): www.autodoc.co.uk/car-parts/c...
Shock absorber: www.autodoc.co.uk/car-parts/s...
Shock absorber for BMW 1 (E82): www.autodoc.co.uk/car-parts/s...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ kzbin.info?s...
0:00 - BMW (E82) - shock absorbers: step-by-step replacement tutorial
1:43 - Raise the front of the car and secure on supports.
3:40 - Clean all joints of the arm.
5:57 - Disconnect the steering knuckle from the shock absorber strut.
7:40 - Remove the old shock absorber from the hydraulic coil spring compressor.
7:50 - Install the new shock absorber on the hydraulic coil spring compressor.
16:24 - Lower the car and working in a cross order, tighten the wheel bolts.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► BMW car repair tutorial - • BMW car repair tutoria...
► BMW 1 (E82) car repair tutorial - • BMW 1 (E82) car repair...
► How to replace glass for wing mirror / side mirror glass BMW (E82) - • How to change glass fo...
► How to replace air filter on BMW E82 - • How to change air filt...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZbin: / autodocuk
Instagram: / autodoc_autoparts
TikTok: / autodoc.eu
Snapchat: / autodoc.uk
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2020 AUTODOC GmbH All rights reserved

[@rghant]

Thanks for providing coverage for the e82. Here in the states it's hard to find videos like this. Excellent!!

[@autodocuk]

Thanks for your positive comment! Stay with us!

[@serguei5000]

Best diy video I’ve seen. Thanks!

[@citrinwarren6073]

Great demonstration. Thanks

[@suj1945]

Excellent video

[@bryanjones3647]

Just watched thank you for your help interesting viewing

[@autodocuk]

We are glad that this video was useful to you!

[@alexey9900]

Good 👍👍👍

[@thefaster69]

Superb..

[@autodocuk]

We are glad that this video was useful to you!

[@garydeandeery]

You make it look easy lol I had to do mine today on the drive way hard to do with only one way to work at and on stands lol

[@autodocuk]

We cannot show all the nuances and problems when replacing, this is all individual and it is not always possible to solve them at home. To avoid this, we always recommend that replacements be made at specialized services.

[@jampaja]

Wel done

[@devinmcgee5265]

10/10

[@regulardude2011]

Really good video. Is it necessary to remove control arms? I’ve seen videos of people just loosening them a little bit

[@autodocuk]

You can find this information in the technical documentation for car repair. AUTODOC

[@themashedavenger5461]

Yer just loosening them should be enough to pull the tops out of the wheel arch, tho you may need to disconnect the steering rack ends as i dont think the will go that low.

[@markusluther7756]

What type of spring compressor is used in the video? Would be glad to buy one.

[@autodocuk]

You can get acquainted with the goods at the link www.autodoc.co.uk/spares-search?keyword=Coil+Spring+Compressor. We recommend paying attention to www.autodoc.co.uk/energy/13638323?search=ENERGY%20Coil%20Spring%20Compressor%20(NE00156) AUTODOC

[@MrXmaciek]

If these videos are for individuals it should be presented how to manage with it at home garage

[@autodocuk]

Thanks for the clarification, we will take that into account in the next videos. AUTODOC

[@jeffhyde7934]

Just curious on what spraying the head of the bolt with wd-40 does?

[@autodocuk]

The mechanic sprays wd-40 on the head for correct and easy key setting.

[@fattahdert4557]

👍👍👍

[@neko_789]

Do you have to remove the whole hub assembly?

[@autodocuk]

Needs to be detached from the levers, it is not necessary to remove it completely.

[@lodrakk3114]

WHat is the name of the tool for compress springs?

[@autodocuk]

The part is a spring puller. AUTODOC

[@scw3196]

@@autodocuk but what make/model puller is it? Sealey and model etc?

[@rak8024]

How long would it take a mechanic to replace a pair of front shocks on an e82? Thanks

[@autodocuk]

Unfortunately, we do not have such information. We recommend contacting the service of your car. AUTODOC

[@Bimmer_MD]

BMW data says 3.8 hours

[@bodobendonjic5188]

hello :), does anyone know why the front end of my car on the BMW e87 is 2 cm higher? thank you ;)

[@KNS_Racing]

No matter what I tried, I could not get the shock body loose and free from the aluminum shackle it slides into

[@poorboymechanic5280]

Hi, could you please direct me to where I could purchase the shock absorber socket from or? The actual size and profile as can't get a proper look at it in the video. Any help, much appreciated.

[@autodocuk]

We recommend that you contact our Customer support service and provide the VIN-code of the vehicle to select the required spare part. AUTODOC

[@88CBAUGH]

Teng TENM120046 Spark Plug Socket 21mm 1/2 Square Drive

[@missedapproachmark]

Does one need to change them as a pair?

[@autodocuk]

Thank you for your feedback! Regardless of the nature of the damage or wear, it is recommended to replace the shock absorbers in pairs. Stay tuned with us! Best regards, Autodoc team!

[@hard13heavymetal]

Always.

[@mesmerize15]

Is this the same for an E87?

[@autodocuk]

In general, the replacement will be similar, the only thing that may be slightly different is the design features of your car. You can find more detailed information in the technical documentation for the repair of your car. AUTODOC

[@Brock_Landers]

Rextum

[@garydeandeery]

Had mine fail the mot and they wanted £400 to fix it So I got the part off eBay £50 and spent few hours doing it

[@autodocuk]

We are sure that your comment will be useful for many of our viewers.

[@bradleykelsey8927]

8:03 me fr

[@autodocuk]

Please clarify your question and we will be able to assist you.

[@roberts6583]

Warning.. Make sure to check the torque settings for your car elsewhere as the AUTODOC tutorial for the rear shocks suggests settings TWICE what is required and has lead to snapping components…!! Good tutorials, but dubious torque settings

[@autodocuk]

Our videos are for guidance only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of a car maintenance service. AUTODOC

[@e65y]

wo w