How to change a HUB MOTOR shell on a electric skateboard

[@mm2Milo]

How it going bro. Trying to replace my pu sleeves. But can't find any. Can u help.

[@gama9865]

Hey, if you remove the motor shell, how do I get to the bearing? I need to change it and I dont know how to get to it...

[@MouseWanted]

Can we change them to offroad wheels?

[@LeonALV]

hey dawg can you help me same happened to my board but cant find the fight allen key or the wheel replacement

[@jamesthebond0072]

Well I’m glad this skateboard had a replacement wheel..

[@iztoiemon3631]

Why'd you change that cover if it worked good, and how to get that, I don't know it name?

[@Navigatorl]

Where did you buy hub wheels?

[@JasperBzone]

Actons website 🤙 ACTON ACCESSORIES | ACTON acton.fun/collections/accessories

[@marshallmcdermott4737]

Both of my wheels stopped spinning freely, now they spin with a lot of drag. There's some sticky goop at the end of one of the motor coils. I'm wondering if that is slowing the shell down

[@JasperBzone]

I've had that goop before on my other boards. I think it's was from severe heat and excessive use and mainly wore out the Hub motor. I ended up sending the board out to the company and they replaced the Hub motor. That was years ago so I'm sure Hub motors NOW are more updated.

[@azimalif266]

Are these water resistant? Can it withstand a puddle on the street for example?

[@JasperBzone]

They state it is. I've been through a few puddles and held up, I still don't recommend going through puddles always. I always avoid riding in the rain or going through puddles as much as possible.

[@dustindudeladewig3220]

Where is a good place to buy these replacement parts

[@JasperBzone]

Recently I haven't been able to find any replacement since Acton conpany changed their product goals for scooters. Sorry man

[@francescolembcke6612]

Hi, I would like your advice, I would like to replace the engines of my ACTON blink s2 with that of the ACTON quatro is it possible?

[@mikeltxi]

did u know if its possible to instal the cloud wheels in this longboard?

[@jordanxblake]

definetly is just buy the attachment

[@mikeltxi]

@@jordanxblake but witch one? because there are many for diferent skateboards

[@jordanxblake]

@@mikeltxi look up cloud wheel pulley kit, it may make your wheels look weird but it’ll work if you want the cloud wheels, they also make hub motor sleeves I would measure yours and see if another brands wheels will fit

[@mikeltxi]

@@jordanxblake I decide to sell my Acton s-r and buy the wowgo 2s pro. Anyway, thanks!

[@jatigre1]

I've been talking for years on why don't we have induction charging with skates (or any other thing that touches the ground), guess I'm gonna have to built it myself. The hobby industry should focus on that too, imagine a circuit were you can ride for hours...

[@zzefinho]

why man. my board is a 36v 8.8ah I always stop riding because my legs start to hurt, and the battery still have charge.

[@kingaddelito2723]

Are there silent ones cuz mine are LOUD

[@JasperBzone]

if yours are running loud then something is wrong with your hub motor

[@Soundmatters02]

Do you know how to change the entire motor unit?

[@juanbustamante5271]

Donde se pueden conseguir? Que tengan ruedas blandas?

[@bERjaable]

Hi. I cant screw out the Screws its pretty old and have much rust. What can i do?

[@knogface]

I think if you cut a rubber band and put it in the whole then use the tool it will grip and work

[@michaelstewart8664]

How do you do the morter it self

[@kingaddelito2723]

That is the morter

[@zaceberhard1955]

Hey thx for the vid, ride a meepo board and love it! Wanted to ask what camera were you using in the beginning shot? 360 degree type right? What brand? Been wanting to get one for riding.

[@JasperBzone]

Thanks for watching. I had a meepo board aswell, great board. I was using a regular go pro attached to a pole. I just planned the shot and kept the camera pointed my direction.

[@guillaumecasal3037]

great video, maybe it would also have been an opportunity to clean the inside of the motor before update the shell.

[@JasperBzone]

I thought about it but it looked pretty clean so I left it alone. Next time I probably will give it a try👍

[@honoreldorado3821]

@@JasperBzone hey brother I broke a couple of the magnets inside my sleeve and I was wondering if you had your old sleeves if I could buy them from you your old tires sleeves you know you can email me back at [e-mail] I'll buy them if you have them thanks for your time God bless be safe

[@JasperBzone]

@@honoreldorado3821 Sorry brother, I threw those out a while back. Hope you find one🙏. God bless to you aswell.

[@honoreldorado3821]

@@JasperBzone oh man such a bummer did you buy those from the Chinese people at took like 6-8 weeks to get here because that's what they're trying to do to me.... total nightmare thanks for replying if you happen to know anybody that has any of those old sleeve man. I'd appreciate it if you'd let me know God bless take care

[@christiamceja7569]

Bro where did you get it?? Please let me know

[@JasperBzone]

Acton Skateboard website. Here's a link for you. ACTON ACCESSORIES | ACTON acton.fun/collections/accessories

[@Bunfit]

@@JasperBzone hi man, my hub motor broken too, but i cant get it coz item is sold out, do you have any idea to get it one ? thankss

[@nermor]

where did you get the new motor hub ?

[@JasperBzone]

From Acton Skateboards website

[@jirkadolezal8127]

👍👍👍👍👍👍👍👍👍

[@terryandteresa]

Thats not a hex, it's a torx

[@terryandteresa]

Thats not a hex, it's a torx