How to change a Lock Cylinder on a Non-Airbag GM Column

[@walnutriggs12]

Thank you so much for posting this video it was extremely useful. Took out and replaced the ignition in a 92 S-10 and had no clue on what to do without this video. Very detailed video thumbs up

[@michaelleemahoney6609]

The buzzer was staying on after I replaced the key lock cylinder when the key was removed. The cylinder I put in the little white gizmo on the bottom of the cylinder didn't move. Now I know the problem thanks to this video. I bought a bad cylinder. Thanks bro

[@MrAhicks66]

I just stumbled across your video while trying to refresh myself on the "joys" of pulling a GM column apart... I've done it once to an '85 S-10 Blazer, and now I need to do it for my '87 LeSabre (and you're right about the 3.8, it's a smooth engine with just the right amount of torque to get these beasts up to speed). Thanks for filming an informative video, you covered all the bases. One thing to note, the cancel cam assembly (if you still have the car) is available as part of the turn signal switch unit, but I've also seen it in the Dorman Help! section of the local auto parts box stores without the actual switch attached. I've had 4 separate 80's GM vehicles that have lost the spring for the left cancel. Also, this is a great fix if you get the other 80's GM ignition issue: where you can pull the ignition key out when the engine is running. Admittedly, I use that as a "feature," I can start the car and let it warm up and take the keys with me, locking the doors.

[@LT1HILLINGHOE]

Great informative video. I haven't removed a switch in a long time, but my 81 Chevy 4x4 needs one and this little refresher course was just what I needed. Thanks and God bless.

[@MegaFlaxman]

excellent video man, had the same problem with my 92 chevy truck, lock froze up in the hardware store parking lot this evening , now I must do this same thing tomorrow in their lot. Nice to know what I'm going to need before attempting this job, thanks again!

[@AnnesleyBroughm]

The Chilton manual glossed over the 'how to' part, assuming I suppose that a pro mechanic would be able to fill in the missing steps. I watched a couple other videos first, each left something to be desired but your video was spot-on and it detailed all the steps involved so thank you!

[@fizzyjennings]

Thanks for making this video. Without it I would have been without a vehicle until I could afford a mechanic! Lucky I wasn't parked on a street with street cleaning, else it would have been even more valuable!

[@JakensteinSEX]

Thanks so much dude! Just successfully used your tutorial for an 89 YJ Wrangler and everything was pretty much the same. Just saved me a couple hundred. Got the ignition cylinder from Amazon for $17 and rented the specialty tools from autozone so I spent almost nothing. You rule! I would know nothing without guys like you selling to take the time to record.

[@TheSoloist87]

Finally, a useful tutorial video. Every other video I watched made this seemingly simple job look extremely difficult. Thanks for this vid, you helped save me time and money. Keep up the good work!

[@yardbomber9099]

Awsome DIY video! Swapped out the lock cylinder on my 89 Olds 88 in less than an hour! Good lookin' out!

[@RedDonkey3]

This video helped me TREMENDOUSLY when switching out my 89 park ave lock cylinder, first time i had ever done one aswell and it went smooth. Thank you!

[@yawyd]

Oddly enough, it is almost exactly like the column in my 89 Dodge Ram Van. I took it apart the hard way without the compressor tool. Now I wish I had it. This helped me out a lot. Great vid.

[@ehlers1512]

Great video. I would of been totally lost on how to repair my 92 s10. Details were awsome. Thanks for the help.

[@bobbyfan418]

Although I'm doing a '94 Sierra, this video helped me greatly, thank you. Go figure, the Chiltons manual didn't offer as many details. Thank you, kind sir,

[@67mustangreg]

DUDE THANK YOU! Needed this for a '88 S15. Nowhere else I looked was as good as your info...forums, searches, other videos. thanks again

[@nkdfz1]

Thank you for making this video, I have never had to do this before and it was very helpful!!

[@jefleppard1029]

NICE! thanks so much for a detailed fix. I am replacing a '93 Yukon switch and this really helped-

[@64Zbot]

Excellent vid! just watched as i did key switch on 92 Lesabre with airbag for my friend

[@87SSBOI]

Very helpful! Probably couldn't have done it without you...

[@enmiredbythelazy4401]

Thanks, saved me some time getting tools, works the same on an old 3/4 ton Chevy pickup:)

[@davidoswald5239]

just what I needed to fix mine great video man I am tackling this job nest weekend on an Astro Van

[@ameliecousteau2574]

Ahhh. A well made video with thorough instructions. All the best to you S.O.S.M. and keep up the great work!

[@dmp825]

very useful video I have an olds 88 ill be working on later this week

[@Masikoira]

Hi Mike. thanks for very well explained video! 5/5 like always. -Petri

[@007Moonraker1]

Excellent video man, thank you!

[@gregorioserrato3114]

hey man im working on my 89 silverado and im down to the last couple steps of reinstalling everything however the little washer type deal that sits against the ball bearing wont go far enough down to keep the steering shaft tight. any suggestions? see 5:16 of your video and youll see what im talking about. thanks alot man.

[@Dylan464]

this helped me with my truck when my paper thin key finaly called er quits

[@ABKTrip]

grrrr if my truck was 3 year older i could fix it with a screw driver in bout 3 minutes.... thanks for the video, will be a great help :/

[@miketlane]

thanks! my 95 jeep Yj has the same set up with a bad ignition lock. now i just need to see how to replace the wiper control that wont twist

[@DB-iu2si]

I have an 89 buick lesabre that the ignition cylinder is stuck in the start position. Will this cause trouble with me changing the ignition cylinder.

[@PRenard2012]

If you try to pull the wheel off without the puller .. LEAVE THE NUT SCREWED ON A LITTLE BIT.. If you dont and the wheel does come off while pulling on it , it will hit you smack in the face..

[@operatorman9965]

This was a great vid that was needed. Any chance there is a more in-depth vid on puttin that buzzer switch in anywhere? I didnt see the copper clip under it until I was putting the buzzer switch back and havnt figured out how it sets or goes back in correct. Im gona try again after seeing this video. Thanks.

[@Finesse615]

THANX 4 THE VIDEO IT REALLY HELPED!!!

[@srr37]

5:23- dont pull buzzer switch out. (harder to replace)- just hit screwdriver with hammer and cut white tab off so its not in the way of the screw

[@mex20oax]

that was a great video bro... i give you an A+

[@SaveOldSchoolMuscle]

@Dylan464 I'm glad my video helped you out.

[@charlesmartin3265]

Respect Man, be blessed

[@AndrewThomasGrubb2nd]

hey boss nice job but I have 93 buick regal that has smoke coming from right behind the wheel on the begining of the steering column

[@geofferyc4080]

Thank you 4 the help.

[@thiando]

good job guy...... Can you help me with my 2001 Buick Century? The AC Evaporator is leaking between the firewall & dashboard. Can you make a video with all the details need to fix it; Like you did on this video? Thank you very much. I would like to do it myself.

[@Spearfisher1970]

Thank you for the help!

[@UCFCamaroSS]

Thanks for this, a great help!

[@IAMDAVEAMI]

oi what year camarod o you have? i have a 94 z and i think the wires inside the colim are touchign and makig the car shut off after 10 mins so make a video on thats and it be awesome so i can see how its done so i can go out and do it and get it done firts time you know the end :p