How To Change Battery 2GIG/Vivint Door/Window Contact Sensor DW10

This video will show you how to change the battery on a 2GIG or Vivint door and window contact sensor DW10. To start push the tab at the bottom of the door/window sensor then gently pull the contact sensor off of the mounting bracket. Then you need two CR2032 batteries or just 2032 as they are the same. Use a small screw driver to pop the battery out of the contact sensor. install the new batteries back into the door/window sensor. Now you can remount the contact sensor back on the mounting bracket on the door/window. Now your DW10 sensor is ready and your 2GIG/Vivint system is now back in operation.
CR2032 batteries amzn.to/2TdbNiO
www.sellgooddeals.com
As an Amazon Associate I earn from qualifying purchases..

[@hissonggirlmoni5706]

Vivint should not only promote your channel AND give you a fee. You have helped immensely.

[@alexvaloria1422]

Your clear video has helped me with my model sensor. Thank you!

[@Acme_Anvil]

Thank you so much quick and easy. I wonder btw who would dislike this. Short and to the point

[@fayfountain6562]

thank you.....did it..

[@duanegeorge4688]

A little nick...I went to auto zone and purchased some paint...covered right up.

[@limitlessdanielson5162]

Much love 🙏🏾❣️.

[@cartagenajason]

Do you know how to replace the battery inside the door camera?

[@martybroussard1572]

Thank you Sir!