Рет қаралды 4,781
If the battery on your cordless drill does not hold a charge or it runs down quickly, it may need to be replaced. Cordless drill batteries can wear out over time. The performance of the battery can also deteriorate if the battery has become damaged. Using a multimeter, cordless drill batteries can be tested to determine if they need to be replaced
Alternative is to replace the battery elements inside power pack. It's actually quite easy to do and saves easily over 30€ when compared of purchasing new pack. Of course it'll take some time and effort, but for someone willing to DIY and values recycling, it's the right way to go.
First part of project is opening the battery pack and checking what type and size the batteries are. Opening the pack depends a lot of the pack itself.
After opening the pack one has to check what size the rechargeable cells are
After opening the power pack you'll need to unsolder the power wires from old batteries and start preparing the new ones.
******************************************************************************
Use this information at your own risk. Any injury, damage, or loss that may result from improper use of any tools and equipment, or from the information contained in this video, the user must take responsibility.
If you think this video helpfull for you, remember to give it a "thumbs up" and "subscribe" to my channel..
pro 2 DIY
subscribe : / pro2chilox
******************************************************************************
Sekiranya bateri di gerudi tanpa wayar anda tidak dapat diisi atau habis dengan cepat, ia mungkin perlu diganti. Bateri gerudi tanpa kabel boleh habis sepanjang masa. Prestasi bateri juga boleh merosot sekiranya bateri menjadi rosak. Dengan menggunakan multimeter, bateri boleh diuji untuk menentukan sama ada bateri perlu diganti
Alternatifnya ialah mengganti elemen bateri di dalam power pack. Ia sebenarnya agak mudah dilakukan dan menjimatkan jika dibandingkan dengan membeli pek baru. Sudah tentu ia memerlukan sedikit masa dan usaha, tetapi bagi seseorang yang suka melakukan DIY dan menghargai kitar semula, ini adalah cara yang tepat.
Bahagian pertama projek adalah membuka pek bateri dan memeriksa jenis dan ukuran baterinya. Membuka pek bergantung kepada banyak pek itu sendiri.
Setelah membuka pek, seseorang harus memeriksa ukuran sel yang boleh dicas semula
Selepas membuka pek kuasa, anda perlu melepaskan wayar kuasa dari bateri lama dan mula menyiapkan yang baru.
************************************************** ****************************
Gunakan maklumat ini dengan risiko anda sendiri. Sebarang kecederaan, kerosakan, atau kerugian yang mungkin disebabkan oleh penggunaan alat dan peralatan yang tidak betul, atau dari maklumat yang terdapat dalam video ini, pengguna mesti bertanggungjawab.
Sekiranya anda fikir video ini berguna untuk anda, ingatlah untuk memberikannya "thumbs up" dan "subscribe" ke saluran saya ..
pro 2 DIY
melanggan: / pro2chilox