How to change Crank Position Sensor on a 2005 Chrysler 300c

Changing crank position sensor on my buddy’s 3hunnit
Tools needed:
Ratchet 3/4
10mm socket
(10mm Ratchet wrench used for battery terminal)
15mm socket for starter bolts
Flat head screwdriver for lock tab on sensor.
Jack
Jack stands x2
Steps:
Jack up the car
Set jack stands
Disconnect negative battery terminal
Unbolt starter from underneath car (3 15mm bolts)
Unbolt Crank position sensor. (10mm bolt)
Disconnect lock tab (I pinched one side while prying with a flat head on the other)
Disconnect old sensor.
Connect new sensor.
Reassemble in reverse order.
Enjoy.