HOW TO CHANGE CV BOOT ON RHINO BRAND AXLES - RHINO 2.0 - RHINO X300

[@dustbustr91]

any reason you cant seal with plain ol hose clamps?

[@masonjamieson5088]

Hey did you end up just using regular hose clamps?

[@KikoValleyMan]

I use safety wire. Just don’t over tighten. For me the biggest problem is that the actual boots tear open or dry rot from heat.

[@highlifter1634]

You said in the video we can get the TPE Boot pliers from your website but the do not come up when I search for them. Do you have a part number for them ?

[@SuperATVMedia]

Hey Rachel, thanks for tuning in! Unfortunately, we do not offer the pliers anymore. However, you should be able to find many options easily on Amazon. Here is a link: www.amazon.com/ABN-Ear-Type-Crimping-Mercedes-Vehicles/dp/B00K0TOYJE/ref=sr_1_10?crid=1ETMQUR81AMIY&dchild=1&keywords=boot+clamp+pliers&qid=1601299580&sprefix=boot+clamp+%2Caps%2C149&sr=8-10 Thanks!

[@TheNickman9]

Is it the same process for the outer side of the CV joint as the inner side??

[@SuperATVMedia]

Yes it is.

[@djhals0]

I notice you didn't show the tool actually pulling the bigger clamp together. This is nearly impossible without shearing the barb off of the clamps on these things. Just like he did when removing the small one. I'm sure that took a couple of takes since the video was spliced right there..... I will order this tool and see if its any better than my motion pro ones.

[@DonnieF85]

I ordered the tool and it’s about impossible to get this clamp on. I love how they edit the video to make it look easy

[@michaelmims8203]

2008 450 rhino front inner boot doesn’t come apart the way hes shows using 2 hammers. No need to hammer anything????

[@pcbmale]

my 2.0 pioneer axles are clicking in 50 miles , anyone else have this problem?

[@bradhughes613]

I give mine absolute hell and only problem has been stripping the splines off the shaft on a front outter. They replaced under warranty quick and easy. Only others I have broken have been from suspension parts breaking and taking an axle with it. Is it all of your axles or just 1? I do run limit straps on my rzr to reduce any chance of binding. If you're running a big lift you might want to look into limit straps.