How to change front brake discs and front brake pads on SKODA SUPERB 2 TUTORIAL | AUTODOC

[@gregwbrittain]

Good video, very helpful. Just changed pads and discs on my mk2 octavia vrs using this. Thanks for the help 👍🏻

[@autodocuk]

Thank you for the feedback! We are glad that our tutorial was helpful for you. Best regards, Autodoc.

[@game4alaughman]

Great that they take the time to put these videos on, few more add ons tho. First clean brake fluid cap in the engine and undo the cap to release pressure. Also clean the disc Cradle before putting back on, and most importantly gently clean round the rubber that holds the piston ( not with wd40) as it damages the rubber over time... try brake cleaner, before pushing back. Eh and while your at it, put sum copper grease on the pads. Look at other vids and you will find where and how. And clean the slide pins and put bit of silicon grease. Never Cooper grease

[@autodocuk]

Thank you for your comment! You are absolutely right, some moments were missed, in the future, in new videos, we will definitely add this information for our viewers. Best Regards, Autodoc team

[@Pstaines439]

Love these videos! Have you done one on replacing the rear trailing arm bushes?

[@autodocuk]

Thank you for the feedback! We are currently working on creating a wider range of tutorials including the one you mentioned. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@mightyeagle]

Watch it again and you clearly see pad being installed in calliper bracket for outside pad and inside is put on calliper with spring to hold it to piston

[@autodocuk]

Thank you for the feedback! We are hopeful that our tutorial was helpful for you. Please, stay tuned. Best regards, Autodoc.

[@lukasnistor1837]

I bought disk and pads from autodoc install same way but now disk smoke

[@bellapierre3977]

Hello,I have a superb from 2014(sedan)170hp,dsg.I want to replace the front disks and to buy them from your app but I saw that you have 2 sizes:288&312 mm .Please tell me which are the right one? Thanks!

[@autodocuk]

Thank you for your comment! We highly recommend you get in touch with our customer support via [e-mail] to get the answer to your request. Best Regards, Autodoc Team

[@sergenity]

No ceramic spray?

[@autodocuk]

Thanks for your feedback! Please clarify or rephrase your question.

[@sergenity]

@@autodocuk you did not lubricate anything, why

[@bjgdzebra]

I have 2 SKODA SUPERB 2, one for my wife and one for myself. Mine has change 3 wheel sensors. As my wife`s , MCU showed error code 2 months ago and that cost a lot of money. Wish autodoc teach me how to change the MCU.

[@autodocuk]

Unfortunately, we don't have any tutorials about the replacement of wheel sensors in the SKODA SUPERB 2. The existed list of tutorials for SKODA SUPERB 2 can be found here: kzbin.info/aero/PLWep5LzT0sxlRvhrOfO5CfQjYdSE59DUr Stay tuned and follow our latest updates. AUTODOC

[@garychillingworth]

Thanks

[@szerminator355]

Ale zaj...ą piastę zostawił! Sama rdza 😱

[@autodocuk]

Dziękujemy za Twój komentarz! Prosimy skonkretyzować pytanie. Pozdrawiamy, AUTODOC

[@stephendalton8532]

If only disks came off with such ease

[@autodocuk]

Thank you for sharing your opinion! AUTODOC

[@Pierssy]

Hi I watched a few times and you forgot to put the second pad in, shows the inner pad going in but never shows a second outer pad going in, having only one pad means you have no brakes at all!

[@autodocuk]

Thank you for your feedback! To save the time in the video some stages of the repairs might have been excluded.. In practice the torque wrench should be used. Best Regards, Autodoc.

[@game4alaughman]

Watch time 4:55. Pad goes on

[@jboland1192]

Mr Tyre want £200...........