How to change front brake pads on TOYOTA RAV4 II [TUTORIAL AUTODOC]

[@rafaelperezbron9818]

Excellent!😊

[@alexey9900]

Good 👍👍👍

[@dividivus]

So 17 mm socket not required, only 19 for wheel nuts and 14 for the bolts holding the floating part of the brake caliper. You need 17 only if you change the brake rotor, when you need to remove the brake caliper from the hub assembly.

[@autodocuk]

We are sure that your comment will be useful to many of our viewers.

[@dividivus]

@@autodocuk Not necessary. I found out that you need a 17 mm wrench to hold the sliding pin when tightening the 14 mm bolt securing the caliper.

[@autodocuk]

The sizes of nuts and bolts may vary slightly. It is advisable to have a set of heads and a set of keys.