How to Change Front Discs, Pads & Brake Fluid on a 2012 Mazda 2 1.3 MZR DE 5 Door using Bosch Brembo

Рет қаралды 13,145

Күн бұрын

Пікірлер: 45

@alesz18 2 жыл бұрын

Good video, Thanks for sharing. The torque specs was missed I got it from the workshop manual: Caliper bracket bolts: 82-101 Newton metres or 61-74 ft-lbf Guide pin bolts: 22-31 Newton metres or 17-22 lbf Wheel/Lug nuts: 88-118 Newton metres or 65-87 lbf

@frankgrimes2991 2 жыл бұрын

Thanks so much! Really helpful as I'm going to be changing my brakes, caliper, and rotors on my Mazda 2. Doesn't look to hard if you see someone else do it first.

@deltaforce01 3 жыл бұрын

Plenty of lubrication... Giggity 😛 great video, excellent... Really proud of you Jon you've got a winner of a channel. 👍😊

@CarFlix. 3 жыл бұрын

Thanks Wayne! You can never have enough lube 😁, glad you enjoyed the video, Greyson says hi 😊

@timkudryavtsev4133 3 жыл бұрын

Great video man. Fellow Mazda2ForumUK member.

@CarFlix. 3 жыл бұрын

Hi Tim, thanks so much for your feedback, let me know what videos you'd like to see done and don't forget to subscribe 😊, thanks again for your support 👍🏼

@penelopedacunha5847 3 жыл бұрын

Very useful information.......Love Greysons bloopers 👍, so entertaining

@CarFlix. 3 жыл бұрын

Thank you, Greyson says hi 😊

@MrUriel250 2 жыл бұрын

Great video! Where did you put the jack stands? It supposed to be on the side of the car (where the pinch mark is) or am I wrong?

@CarFlix. 2 жыл бұрын

Well spotted, Peugeot decided to make the jacking points out of cheese so I used the front cross member and the rear suspension cups ☺️

@stevenrodriguez3841 Жыл бұрын

Me gusto tu video me podrias enviar el link de las piesas donde las compraste brake pads y disco de freno por favor

@CarFlix. Жыл бұрын

Hi, and thank you for your comment 😊, if you look in the video description all the links should be there. Everything was purchased from Autodoc , hope this helps ☺️

@trabador0376 3 жыл бұрын

Great work mate, whats rge torque setting for the caliper bolts and wheel lug nut?thanks

@CarFlix. 3 жыл бұрын

The book said 90 but I felt that wasn't tight enough, so I went for 100 in the end, have had no problems at 100 l, hope this helps 👍🏼

@banuke80 Жыл бұрын

for the bleed do you have to do both right and left or just the one side for front and rear? thanks for the video. keep up the good work! cheers

@CarFlix. Жыл бұрын

Hi 😊 and thanks for the comment. You have to do all four wheels, starting at rear wheel furthest away from the brake fluid reservoir then on to the opposite rear wheel. Then the closest front wheel to the brake reservoir then the opposite front wheel. Hope this makes sense ☺️👍🏼

@PGGLASS-ri2fq 6 ай бұрын

How to change petrol filter on Mazda 2 1,3

@ro4lol 2 жыл бұрын

Great video cheers brother good time with the family too 🍻🍻🍻🍻 part with the brake fluid will help me

@CarFlix. 2 жыл бұрын

Thanks for your comment 😊, so happy it helped you, A very easy car to work on too, which is a rarity these days 😊

@prbui 2 жыл бұрын

do you have the reference of the brembo pads? P16 013?

@StyvenRodriguez-ht6rj 7 ай бұрын

One question, are the brake pads ceramic or metal?❤

@CarFlix. 6 ай бұрын

Metal

@MrMichaelBlyth Жыл бұрын

Hey, looking to do the same for my Mazda. Can you tell me what tool you used to move the brake pistons? Thanks.

@noregertsracing6585 8 ай бұрын

He used Channelocks, ideally you'd use a c-clamp using one of the old pads so it equalizes the around the caliper piston

@StyvenRodriguez-ht6rj 7 ай бұрын

One question, are the brake pads ceramic or metal?

@CarFlix. 6 ай бұрын

Metal 🙂

@KW-kx9if Жыл бұрын

How many miles did you do before your disc's needed changing?

@CarFlix. Жыл бұрын

Hi, it was hard to tell as we changed them after being the car 2nd hand. As a rule of thumb I'd always change the discs and pads together, especially if you don't know the cars history ☺️