Attention! This video contains mistakes: 8:47 - the tightening torque is 55 Nm, not 105 Nm. 8:52 - the tightening torque is 40 Nm, not 65 Nm. 8:58 - the tightening torque is 43 Nm, not 55 Nm. 9:47 - the tightening torque is 60 Nm, not 50 Nm. 10:12 - the tightening torque is 245 Nm, not 115 Nm. 10:24 - the tightening torque is 100 Nm, not 110 Nm. We're sorry for the inconvenience 🙇♂
@autodocuk5 жыл бұрын
Have a look at other videos on our channel: 🔸 PEUGEOT 208 1 car repair tutorial - kzbin.info/aero/PLWep5LzT0sxnLT8M6UaR2DSD7Cm4ZlS4T 🔸 How to replace front suspension arm PEUGEOT 208 1 (CA_,CC_) - kzbin.info/www/bejne/nHjReoOwjJiSoMU 🔸 How to replace pollen filter / cabin filter on PEUGEOT 208 1 (CA_,CC_) - kzbin.info/www/bejne/eZWlq4KOfdOpjaM 🔸 How to replace spark plug on PEUGEOT 208 1 (CA_,CC_) - kzbin.info/www/bejne/pJbbgIB7e8Z3mLM 🔸 How to replace front brake discs / front brake rotors on PEUGEOT 208 1 (CA_,CC_) - kzbin.info/www/bejne/j5Cql5eHg8emY9U
@liamhudson628 Жыл бұрын
Is there a certain way the top strut needs to be put back in? As I have followed your instruction yet I am still getting a serious knocking from the top strut
@autodocuk Жыл бұрын
Without proper diagnosis it is difficult to say something, it is recommended to contact the service.
@BrendanFegan-gy2cu9 ай бұрын
Did you ever find out what caused it have the same problem
@mylesjoshuamelia43964 жыл бұрын
Where can I get the socket that was used to take the top nut off?
@autodocuk4 жыл бұрын
Thank you for your comment! We highly recommend that you contact our Customer Support agents and you will get advice on which car parts you need to obtain. We look forward to hearing from you! Best regards, Autodoc team!
@beatsquad675110 күн бұрын
Would this be the same for a 208 gti?
@autodocuk9 күн бұрын
It is not possible to answer your question unequivocally, you can find out this information in the technical documentation for the repair of your car.
@JmaxCreativeNI2 жыл бұрын
How do you remove the scuttle panel on the passenger side?
@autodocuk2 жыл бұрын
Hi! The casing is held on with bolts and clips, unscrew the bolts and unfasten it.
@rakonda4 жыл бұрын
One missing thing here, cleaning the removed parts before connect them again.
@falcao64655 жыл бұрын
is this wd 40 ad?
@autodocuk5 жыл бұрын
Thank you for your comment! We kindly ask you to clarify your question and our experts will be ready to help you with any questions you have. Best Regards, Autodoc team.