Top Video.I bought one on ebay for $50 Au and fitted it myself in 2 hours.Half the inner race stayed on the shaft & needed to grind it to release it & with no Press I used a Hammer to remove the old one then placed the new one in the Freezer for a hour & used a LPG burner to worm the case up then used the Vice to press it on.Worked well.Thank you for helping me not get ripped off by a Mechanic.
@autodocuk6 жыл бұрын
Thank you for a good commentary! It was a good idea to freeze wheel bearing to reduce its diameter which ease its piercing. This lifehack will be useful for our viewers! Best regards, Autodoc.
@6ftS2 жыл бұрын
Thank you so much for this amazing reference video. I did the replacement of my lower control arm ball joint and removed my cv shaft to have it checked while getting a new hub and bearing pressed so that I can refit it all again. Did the refit and the car drives amazingly now... Thanks again!!
@autodocuk2 жыл бұрын
We are glad that this video was useful to you! Thanks for your positive comment! Stay with us!
@derekbond35125 жыл бұрын
Brilliant stuff, gives you all the mechanical information needed to do this replacement.
@autodocuk5 жыл бұрын
Thank you for your feedback! We are glad to know this tutorials was useful to you. Stay tuned for more! Best regards, Autodoc!
@quintalyurts81926 жыл бұрын
Oh, to be able to work on such clean cars, in the air and with power tools. Such luxury.! Lol. Nice video guys. 👍
@autodocuk6 жыл бұрын
Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.
@steveaustin626 жыл бұрын
Thanks very much, it helped me to scope out a forthcoming job.
@autodocuk6 жыл бұрын
Thank you for the feedback! We are glad you find our video interesting and informative. Stay tuned. Best regards, Autodoc.
@LowreyContractorsUK Жыл бұрын
Thank you. Very helpful
@florianscherer3448 Жыл бұрын
Well, actually it took nearly 3 hours to do the work - shown here in 16 minutes 🙂 I also broke some of my old tools....For those of you, doing it the first time, I would like to share some advice regarding the necessary tools: What you need for sure is solid 3/4 - 32 in a long version (about 90mm or 3,5inch) a very solid truck ratchet or a 3/4 tire cross for trucks to open the main nut at the driveshaft. Abattery powered impact wrench is also nice to have. Either you have an hydraulik press or you use a handheld system. Make sure, your grinder is nearby and equipped with a 1x125mm disk to cut awy the outer part of the bearing, when it snaps of and stick to the disk rotor 🙂. Some grease is also a good idea. And if you change the driveshaft too, make sure to have a carpet underneath to soak up the transmission oil coming out. Lots of brake cleaner and some transmission oil proofed useful.
@autodocuk Жыл бұрын
We are sure that your comment will be useful for many of our viewers.
@rodinbruce7663 жыл бұрын
Awesome video, it helped a lot, nice and clear, well done team. 5 stars
@autodocuk3 жыл бұрын
We're glad you like our work!
@kholiqkarjuni22822 жыл бұрын
Saat di Zoom sebaiknya tanpa partisi broo, supaya maximal fokusnya
@5punkybob6 жыл бұрын
Loved it.. I need to do this to my exy... Going to try to remove the hubs at home and I have a friend who can press in the bearing for me.
@autodocuk6 жыл бұрын
Thank you for the feedback! We are glad you find our video interesting and informative. Stay tuned. Best regards, Autodoc.
@josephvlastelic49504 жыл бұрын
Great video. Any particular reason why he does not grease the wheel bearing and the hub hole? Should this not be done prior to installing the new bearing?
@autodocuk4 жыл бұрын
Thank you for your comment! The mechanic prepared the bearing completely before installation, but we did not show this that to save time. Best Regards, Autodoc team
@richardrichard54092 жыл бұрын
It's a sealed bearing!!
@annbond74533 жыл бұрын
great video and very helpful suggestion to improve a little can you please put torque setting up thanks
@autodocuk3 жыл бұрын
Thank you very much for your comment, we will fix it as soon as possible. AUTODOC
@orange12v6 жыл бұрын
I very much like these videos but in this one he did not install the split pin right
@autodocuk6 жыл бұрын
Thank you for your feedback! We appreciate your valuable remark. We will take it into account and try not to make such mistakes any more.Best regards, Autodoc .
@m4ray6 жыл бұрын
Thx for video, I buy now in Autodoc!!!
@autodocuk6 жыл бұрын
Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.
@mzolist4 жыл бұрын
Thank you for such a brilliant tutorial. Just one question though, I struggle to see the socket and wrench sizes. Could you please zoom the view some more. I hope I’m not the only one to notice this, otherwise it will mean I’m blind :)
@autodocuk4 жыл бұрын
Thank you for the feedback. We are glad that you liked our video review. All the sizes of the keys we indicated in the captions under the video. Best Regards, Autodoc team.
@mzolist4 жыл бұрын
I didn’t realize. Thanks a lot.
@garycamilo76573 жыл бұрын
instaBlaster
@willyi34565 жыл бұрын
Do you have tutorials for Nissan X-Trail NT31?
@autodocuk4 жыл бұрын
Thank you for your interest in our channel. But unfortunately we do not have such a video. Best Regards, Autodoc Team!
@dreytpeters43456 жыл бұрын
Question if anyone can help a brother out. the T31 bearing would be for the 2008 X-Trail? my back left is bad and wanna change it. however gonna have to order it maybe off ebay since i can find the part there. thanks in advance
@autodocuk6 жыл бұрын
Thank you for the feedback! We strongly recommend you to visit a specialized car service center. Best regards, Autodoc.
@ericlastomen82155 жыл бұрын
Do youve tutorial of repacing Nissan NV350 wheel bearing?
@autodocuk5 жыл бұрын
Thank you for your interest in our channel. But unfortunately we do not have such a video. Best regards. Autodoc Team!
@mohammedazgaralishah56546 жыл бұрын
Tanq for the vedios... Can u make a vedio for gear vibration problem in Nissan xtrail T30 AT
@autodocuk6 жыл бұрын
Thank you for the feedback! We are currently working on creating a wider range of tutorials including the car you mentioned. Stay tuned and follow our latest updates. Best regards, Autodoc.
@barnautos74132 жыл бұрын
Try doing it to a rusty one !
@leonetesor2759 Жыл бұрын
👍
@hugostiglitz69142 жыл бұрын
Why the useless music. Just have ambient noise created when you work.
@ryancasey39296 жыл бұрын
Give us a smile lad 😂
@autodocuk6 жыл бұрын
Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.
@benjaminwatson71665 жыл бұрын
What happened to the Disc ,
@autodocuk5 жыл бұрын
Thank you for your feedback! Please, re-phrase or clarify your question. Best regards, Autodoc.
@philbottomley5744 жыл бұрын
It was a new disc previously fitted, thats why it was clean and shiney if thats what you are refering to
@kgokopo6 жыл бұрын
Gud job
@autodocuk6 жыл бұрын
Thank you for the feedback! It inspires us to make more videos! Follow our upcoming updates. Best regards, Autodoc.
@lecrams13 жыл бұрын
Oh, he forgot to put back the split pin, and also you should always replace with new ones, but apart from that it was a good tutorial vid.
@stevedeamer33514 жыл бұрын
the split ring and circlips should have been replaced with new
@autodocuk4 жыл бұрын
Thank you for your comment. We will definitely take this into account in our new videos. Best Regards, Autodoc team.
@kgokopo6 жыл бұрын
Gud job
@autodocuk6 жыл бұрын
Thank you for the feedback! We are glad you find our video interesting and informative. Stay tuned. Best regards, Autodoc