How to change front wheel bearing on MERCEDES-BENZ (W211) E-Class [TUTORIAL AUTODOC]

[@nazeem26]

That's not how you grease a wheel bearing.

[@21divel]

Most of that bearing was dry out here installed it the way it was in the vid. Must be a European thing.

[@دازايسان-م8ه]

انا متابع لكم من العرب...شكرا لجهودكم

[@Darachay]

Thanks for the video now I know I’m going to a mechanic

[@burgerbirger2221]

Good to have the torque numbers👍

[@autodocuk]

You can find this information in the technical documentation for the repair of your car directly.

[@markfitzgerald7556]

That's not how I was taught to pack a bearing, also you are supposed to adjust the wheel bearing with a dial indicator to 1 -2 thousands and torque the locking device to 11nm

[@mzee5533]

Yes I would say the same also

[@rfbu]

Yup that bit was missed

[@alfonsocruz6156]

Thank you for the video Teach mi a lot 🙏❤️

[@autodocuk]

Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned with us! Best regards, Autodoc team!

[@planespeaking]

What is he doing at the end with the OBD plug? Thanks.

[@simenskaret]

Think he is reconnecting the SBC unit

[@planespeaking]

@@simenskaret Thanks Simen. Mine is post facelift so it doesn't have SBC

[@Martin.H98]

@@planespeaking well, lucky you 🤣

[@adogmcdizzle]

You don’t need to do this. You can just pull the plug off it under the bonnet; probably the easiest way and doesn’t seem to log any codes.

[@EuroprisPluss]

@@adogmcdizzle or just lock the doors and put the key somewhere you cant reach it until brake caliper is installed again

[@1kilohawk]

The bearing won't last 100 miles if you grease it like this.

[@AYoDrew32]

At 8:32 is the wheel speed sensor supposed to be worn down like that?

[@autodocuk]

The wheel speed sensor should not wear out.

[@mustafamechanic1094]

Crazy job and I like this job

[@autodocuk]

Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned for more! Best regards, Autodoc team!

[@trueBoBaH]

9:11 What is the copper color pray you were using in the video?? Could you please send the link??

[@autodocuk]

Uses copper grease 3970 Liqui Moly

[@valongashi7460]

Can someone tell me it’s the same also for the 4matic ????

[@autodocuk]

You can find this information in the technical documentation for the repair of your car directly.

[@karkyboy]

What is he doing in 0.40? I understand he have to do someting with the SBC, but exactly what?

[@autodocuk]

The SBC block is disabled by software. The exact description is indicated in the technical documentation for vehicle maintenance.

[@paris7842]

I need the hub!

[@johnstone3683]

That’s not how you pack a bearing , doesn’t want to get his hands dirty!

[@peterw9104]

12:30 cap sits sqare and he still hit it, could bend and leek fat onto the disk later, but else nice video!

[@autodocuk]

Thank you for sharing your opinion!

[@NK-hw2re]

Разве зазор в подшипниках выставляется "на глаз" ? То это не сервис Мерседеса, а Ровера.

[@autodocuk]

We have already fixed a number of problems in the new videos, we will be glad if you evaluate the new videos.

[@planespeaking]

The front caliper carrier bolt are 18mm socket. I know I just removed them

[@autodocuk]

Thank you for your comment. We will double-check this. AUTODOC

[@donkmeister]

It's worth noting that there are different brake configurations on the W211... I changed the front discs and pads on my W211 (E500 with SBC) today and it has four-piston callipers with 19mm screws attaching them directly to the hub assembly (no calliper carrier); it uses the same wheel bearing as this video though.

[@joneich1591]

Dude didn't pack the bearing with a grease packer. They won't last long at all.

[@autodocuk]

Bearing lubrication at 7:05 kzbin.info/www/bejne/j2K3m6CngdJ6fcU

[@gokulpnairgokulpnair2942]

Super 👍❤️

[@petemechanic8249]

Thats not how you pack a bearing. Terrible

[@Peter-wo4uo]

Works tho?

[@Financmajster]

@@Peter-wo4uo for a while

[@c.h.r.i.s2253]

Why add so much work to do this??? Just take the caliper off as 1 part!!!

[@autodocuk]

This video is for informative purposes only and does not guarantee a specific result.

[@prins38]

Hobby mechanic😂

[@semiselimovic4646]

Please go Back to school and learn how to grease the bearings..