How to change headlight Ford Focus. Years 2011-2014

[@siljehh]

Thank you!! Made the switch of both headlamps in less than 25 minutes at 7 months pregnant! Easy and well explained with clear shots. Would have fumbled more with the contact if you hadn't shown me how to do it, especially as mine was a bit sandy.

[@windsurferMARC]

And how is your 7 months kid doing? Congrationlations!

[@Overrateddavid]

Ok Simp

[@gardiniacakes9657]

I had to change both of my headlights and I couldn't have done it without your great video! Thank you !!

[@PeterFinnTheCarDoctor]

Thanks Sir. 🙂

[@dkpilot90]

Excellent video. Like to see one that shows how to replace the bulb, please. Thanks

[@PeterFinnTheCarDoctor]

Thanks, will do!

[@memphis375]

It's easy getting the lamp out, but I always struggle putting the new one back in, especially as once the holes didn't quite match up leaving a gap between the frame and lamp, so water could have gotten between the lamp and body and potentially getting important electric components wet. I ended up returning the new lamp for another new one which fitted fine, so that's something to be aware of if you are replacing old lamps with new ones

[@AnonymousJew2018]

I know the feeling. I can take out the old one but can’t get the new one back in😤😤😤😤🙄🙄🙄

[@pjpucci]

Thank you very much. I just bought headlights to replace in my daughter's car. Now I can replace them myself.. Good Job

[@PeterFinnTheCarDoctor]

Great 👍

[@arcd135]

Peter, thank you very much for this video. It was clear and easy to follow AND you saved me about €50! Thanks.

[@PeterFinnTheCarDoctor]

Glad it helped!

[@gainsboroughpara]

Great video. Simple steps. Going to try and do mine myself now 😊.

[@PeterFinnTheCarDoctor]

Have fun!

[@HellinBack]

to take your bulb out undo the dust cover and turn it counter clock wise , also you dont undo screws with a flat screwdriver these bolts are a t30. torx. bit. mainly i just wanted to see if i put mone back in correctly.

[@PeterFinnTheCarDoctor]

Thank You. :-)

[@zacharysimkins6834]

Absolutely nailed it, thanks for your work!

[@PeterFinnTheCarDoctor]

Much appreciated!

[@newsforus9254]

Thx for info! I replaced low/high today with led & so super easy but high beam is trickier & I just couldn't figure out how to remove that one connector to headlight assembly but thx for showing me with just using screwdriver to unlock the connection.

[@PeterFinnTheCarDoctor]

Great to hear!

[@georgesmith9988]

Thanks very much for the video. Very clear instructions and camera shots. Thank you

[@PeterFinnTheCarDoctor]

+George Smith Thanks for feedback. :-)

[@110defendercsw]

Thanks! Super helpful and made the job much easier!!!

[@PeterFinnTheCarDoctor]

Great to hear!

[@plutosheart6807]

Looks very simple, thanks for sharing this video

[@PeterFinnTheCarDoctor]

👍

[@Alexanderrayman]

Great stuff. Gonna go change my headlights now. 👍

[@PeterFinnTheCarDoctor]

Glad I could help

[@jankristiansen6032]

Thank you! it helped me so much.👍👍👍

[@PeterFinnTheCarDoctor]

Glad it helped!

[@cristianomatos7327]

Hello Friend. Can you make a video tracing the halogen lamps of the Focus mk3 (2015 Brazil) sunshade and replacing them with led please? Thanks !

[@ts4gv]

The “clip” on the connecting cable in my car broke. I couldn’t find a way to disconnect it. Ended up changing the light without disconnecting the assembly. How dumb/dangerous was my decision to do so? Just curious for next time. Thanks.

[@PeterFinnTheCarDoctor]

Not very dangerous in my opinion. Of course, when the car is the Ford, there is always a risk that the car will stop on the side of the road due to an electrical fault. Then you just have to call a Toyota Land Cruiser to tow the Ford to the pit...

[@ts4gv]

@@PeterFinnTheCarDoctor thanks & lol

[@pamlove421]

@@PeterFinnTheCarDoctor 🤣🤣🤣👍👍👍

[@williamgallucci9913]

Thank you pal

[@PeterFinnTheCarDoctor]

Thanks for comment 👍

[@Vrsilen1]

Is there a way to take it out without the small plastic tab you pushed

[@Vrsilen1]

The wire that connects to the casing

[@PeterFinnTheCarDoctor]

Maybe no. Or please try? :-)

[@futbolmex95]

I would think these steps are also taken to replace the whole headlight? 😅

[@PeterFinnTheCarDoctor]

Good comment!

[@DrowningTimeOfficially]

Helped allot tnx

[@PeterFinnTheCarDoctor]

Glad it helped

[@debradunfee1820]

Thanks for the video, but you did not show how to replace the bulb!! You focused on the clamp..

[@PeterFinnTheCarDoctor]

Sorry about that

[@quand228]

Please comment and scribe and share

[@martintremblay2581]

Thank you

[@PeterFinnTheCarDoctor]

Welcome!

[@charliegamboa9567]

How can i adjust rte vertical alignment?

[@PeterFinnTheCarDoctor]

Another bolt

[@MrMichaeldan1]

Can any one can send a link where to buy driver headlight for MK2 ?

[@PeterFinnTheCarDoctor]

👍

[@michaeljaeschke1649]

Hahaha I instantly broke the plastic release tab hahaha

[@PeterFinnTheCarDoctor]

Ok

[@anthonyp5484]

I did everything i needed to do to replace bulb but the assembly seems to have a little gap on bottom when i put it all back on car so wondering if somthing is causing this that im missing?

[@PeterFinnTheCarDoctor]

HI, this is difficult job. Please move parts and try again. About 30 try outs and parts fits together.

[@Overrateddavid]

Thank you for the video my friend !✌🏼

[@PeterFinnTheCarDoctor]

Great info. 👍

[@andrewwilliams8996]

Doesn’t show what you did with bulb

[@PeterFinnTheCarDoctor]

Thanks!😀👍

[@patrykb.2854]

It seems my connector was stuck and without using much force I broke that little plastic tab ;[ how do I take out the connector now to put in new headlight assembly?

[@PeterFinnTheCarDoctor]

Heat it heater

[@cocoh2713]

Did you ever figure out how to remove it?

[@edwinpresley3375]

Change 5he title to How to remove the headlight unit. I didn't see a bulb being changed

[@PeterFinnTheCarDoctor]

Noted. 😊👍

[@NTSBxtter]

@@edwinpresley3375 go to another video then bro. he did a great job.

[@xxcrazymaggotxx]

maybe id give a thumbs up if you took the damn light bulb out and showed how to put it in... my lightbulb has wores like connected to it. you only showed how tp take the headlight plastic off... not change it...

[@PeterFinnTheCarDoctor]

Thanks for comment. :-)

[@xxcrazymaggotxx]

Obviously cant read either,,, :/

[@2009blahblah]

Cant touch the light bulb with your bare hands

[@streetlight5576]

@@2009blahblahyes yes must use surgical gloves like the man done on this video .

[@divasantana4958]

Why is so much talk about the connected instead of showing the actual putting in of the bulb?🤦🏻‍♀️

[@PeterFinnTheCarDoctor]

Thank you! Cheers! 👍

[@Depl0rable10]

Those connectors break so often that it's helpful to know how they work incase they fail. Swapping a bulb is pretty easy

[@Depl0rable10]

Those connectors break so often that it's helpful to know how they work incase they fail. Swapping a bulb is pretty easy

[@dklopp541]

Doesn't even know that's a flat head screw driver

[@PeterFinnTheCarDoctor]

Ok! :-)

[@RichardFallstich]

Screwdrivers don't have heads, they have blades.

[@carmenwilkerson5654]

Sounds like a smart dude who speaks more than one language teaching people how to work on their car. 🤷‍♀️

[@1sthawk007]

This guy is a joke

[@PeterFinnTheCarDoctor]

Thanks !

[@JessNW0lfG4NG]

@@streetlight5576 Juan Valdez?