how to change motorcycle oil and dispose of it for free !

[@dudemonkfish4641]

I always run my engine dry. This stops oil leaks. I have had my bike 6 yrs and only replaced the engine 546 times badass.

[@brh4015]

I always have a bottle of used oil on me. In case should ever crash I can pour it on the road so I have something I can blame the crash to.

[@IchibanMoto]

***** bad ass ! I'll have to add that to my onboard essentials kit !

[@vitorarbex]

3 years ago... lol, this comment is still just awesome

[@C4H10N4O2]

I just pour it in my tank : if it's good for a two stroke, it's good for my 650.

[@BMWDamun]

You are a comic genius! Thanks for much needed laughter in these dark times.

[@philbailey8082]

Here in the UK we don't like to throw good stuff away and we know bike maintenance can be thirsty work, so why not try adding some baking soda to the oil and pumping 60 ft/lbs of air through with your metric bike pump once the oil has cooled down (optional - leave in the fridge for 600 seconds), then you have a refreshing cola style beverage to enjoy.

[@IchibanMoto]

i shall try that !

[@nickg1387]

Used oil is good for a castle moat too. It can also be ignited during an invasion, but is next to impossible to extinguish so use discretion.

[@byjingobob]

I didn't have the confidence to work on my bike before watching your videos. Now I look like a pro following your advice. I now have 6 gallons of used oil waiting for empty paint cans now. Cheers Ichiban moto!

[@TornadoCAN99]

Why not skip the middleman and just sell the paint-canned oil as "oil-based" paint to your gardeners for their homes?

[@robinsonrom]

Bad ass! I'll have to look into those sweet foot pegs for my cafe racer too.

[@buckwheat7424]

not only is it excellent weed, ok not that word, but "invasive plant species control but that stuff works great on the dirt road leading to your water well . No more dust on that one. this video you kind of threw me on the technickel explaninations, had to watch it more than 1nce. Got it!

[@brianzaborowski2724]

LOL, I loved the pre-filter for the oil filter, that's bad ass. I've been wondering what I can do with all my old coffee filters since I got a Keurig years ago, thanks!

[@unclequack5445]

Yo, Ichibond, This was an actual moto running on this site, now this is BADD ASS. If its all the same to you sir, thats why I subbed to this site, Its all about the Motos. I give this video a 5 out of 5 Ichiban moto sticker review. BADDASS.

[@dsp4392]

I realize your thing is to push DIY to the extreme, but I can't deny I loled at the "torque meter". That thing is ghetto level 1000 >

[@IchibanMoto]

dsp4 I love my torque meter !

[@dsp4392]

Ichiban Moto Don't get me wrong, I love it too!

[@Meterman76]

You had me right up to the oil filter. LOL - that was funny.

[@GogogoFolowMe]

The paint can tip is actually pretty useful ! 6/5 Ichiban Moto stickers for me

[@IchibanMoto]

+GogogoFollowMe bad ass awesomeness

[@eligsuli]

Great tips...I used to pour the oil down the stormdrain...I never thought of selling it to landscapers...brilliant! Bad Ass!

[@KuroMinoltaRR]

eligsuli that'd be such a waste, I re-use mine for cooking. win-win

[@nominevacans8173]

+KuroMinoltaRR also improves every salad.

[@kabali1788]

+KuroMinoltaRR And hair dye for that slick Elvis look !.

[@whistlinginthewind4141]

A tip for stuck oil drain plugs..I drill a hole in the oil pan then plug the hole with a wood screw using plenty of super glue and Nickle Town assembly tape (good stuff)..

[@burnhamwallace1744]

In Illinois you can take your used oil back to any auto parts store for free recycling, or the mechanics will have an oil tank that they hold the oil and burn it in a heating unit.

[@PAPATexas]

Fun video, love how you recycle the oil in the pant cans! lol

[@titusoverholt134]

i use two coffee filters on first oil change and three next and so on.and use same oil. plus there is no chance that no one will steal your old oil

[@Miata822]

I read in a 1970s Popular Mechanics magazine that used motor oil made a good liquid edger for your lawn. also makes a good weed killer they said.

[@jballew2239]

Alberto Knox Not so long ago you could find what was called a "sand box" near a tool shed, used to clean off shovels, etc. You'd dump the old oil in the sand box so it'd keep tools from rusting after you cleaned them.

[@IchibanMoto]

+J Ballew that's an awesome idea

[@scottloose-8669]

I bought a non-running 1969 Honda CL90. Guy i bought it from insisted that "its a two stroke" and that "it doesn't need the battery to run, it just needs the carburetor cleaned!" Long story short, I fixed the broken points wiring, set the ignition timing and installed a battery. Then checked that it had oil and it started right up. It ran okay but it made a terrible rattling noise... I drained the oil and found it was filled with blue 2 stroke oil and metal shavings...

[@Ticholasnesla]

I love your torque wrench...

[@IchibanMoto]

you can make one too. i have a video on that

[@Ticholasnesla]

Hahahaha that's great. I just turned an old garage jack into a motor jack. Made the base wider and with turning wheels and on top of the jack a platform. It works awesome.

[@Mukeshmiktecrep]

Can we use that torque wrench to torque .5mm bolt?

[@TriumphRascal]

Great video, I might change my oil on my bike before I sell it now, your handy tips might save me some of my British £££,s! Thanks.

[@IchibanMoto]

Triumph Rascal I'm still open to accept the Triumph in on partial exchange !

[@nj1639]

If I ever become bedridden and terminal I want a morphine drip and your videos on a continuous loop! Insanely hilarious! In the meantime I'll just do without the morphine........

[@LPWWE06]

I love the miserable metric vice grip attempts at closing the bolt 😂 😂 😂 😂 😂 😂 😂 😂 😂 😂

[@lesrobinson2410]

just chuck your old oil down the nearest drain its free and helps lubricate the machinery at the sewer works !!

[@techmaven5900]

+Les Robinson It makes a good weed killer also.

[@buxvan]

I just drink my old engine oil. it helps keeps my joints lubricated.

[@squirrellysquirrels1167]

I've found that I can change the oil in my car and put a little in the gas every other fill up... Keeps things moving smooth!

[@edud8452]

I use Pennzoil when I drain it I make candles out of it badass.

[@GTsGarage]

Truly bad-ass tips.

[@motoXcR]

i always wondered if the cafe racer ran...sounds decent as well..barely any valvetrain clatter at all...even with...high end competition blend oil.... on a cold start...in june...

[@MrSpongie1]

Awesome tips and trick's Yeah man!

[@MrShobar]

You can use anti-dandruff shampoo for oil in motorcycles if you can't find oil. Pet shampoos also work.

[@brandenburnett7809]

My roommate flushes the engine with the oil he saved from the prior scheduled service. You have to make sure you don't pour all the oil in because the bad deposits are at the bottom of the jug-from sitting on the shelf for a time. The most important procedure is heating the flush oil to factor temp before filling. Preheat your oven to 350°f, it will save you some time. As a safety precaution use heat resistant tempered plastic to contain the oil during this process...metal containers will compromise the active properties of the flush application. We found that out the hard way.

[@IchibanMoto]

+Branden Burnett I will keep an eye out for tempered heat resistant plastic. Might be a good excuse to attend one of those Tupperware parties with the fit birds

[@SatanicJamnic]

Can I use WD40 instead of this stupid oil?

[@IchibanMoto]

+SatanicJamnic it would keep things from squeeking !

[@TyCetto]

2:06 Hahahaha! That had me rolling on the floor!

[@unclequack5445]

Yo Ichiban, Sir, that bolt sticking off the side stand dont stab into the riders ankle? Blue Flame 1W60? very funny.

[@fluchterschoen]

I was a bit worried that the free disposal was going to be a Deepwater Horizon scenario: but these tips are *_"malo burro"_* as the landscapers might say say.

[@catbreath007]

My local Chinese restaurant buys all my old engine oil ..... Ever wondered why fried noodles are "Bad Ass" golden brown ??

[@ArcanePath360]

Always use mole grips to loosen drain bolts.

[@dsiren4215]

Very informative video thanks

[@MidwestMotoRider]

Awesome tips. Also check with your local garbage pickup, turns out ours will let you dispose of up to a gallon a week just need to set it next to the Recycle bin..! Great foot peg, is that some kind of new anti-slip material and does it come in black?

[@IchibanMoto]

+MidwestMotoRider sure, I can make them in any color

[@joshuahubler5147]

this guy is really funny and amazing

[@bogulom]

1W-60 motor oil is the best

[@IchibanMoto]

Bogumil M It performs bad ass in all ambient temperature conditions !

[@48796gbf]

Hello. A channel was registered. A weld of a bolt is fascinating.

[@IchibanMoto]

+Buxtehude .d welcome ! happy to have you

[@occif2023]

My brother bought a 2 gallon jug of oil at Walmart and opened it up to find it was used oil. Someone apparently changed their oil and returned the old stuff. Pretty ingenious and sad at the same time.

[@IchibanMoto]

oh my!

[@Bronco541]

excuse the noob question but: is there a way to filter used oil? That is; filter all the dirt and gunk from the oil to get it back to it's original clean, clear state? I assume not else, I'd think everyone would be doing it, but why, it seems like this should be possible?

[@IchibanMoto]

+CallMeBronco It's not just that the oil is dirty, it actually degrades. There is viscosity breakdown at a molecular level and repeated water condensation and burn off- a result of going from cold to operating temperature and back repeatedly , causing separation and sludge. Modern oil is much better and lasts longer , however bikes need more frequent oil changes as most run wet clutch friction plates that leave mico abrasive particles that accelerate wear. Oil filters typically only capture particles larger than 10-50 microns , depending on brand.

[@steelrodax]

That thing is deep! My stick wouldn't reach.

[@bloodyhell451]

Great advice as per usual itchy ! I heard you could hone your cylinder(s) by putting some sand in the oil before putting it in the engine. Is this true ?

[@IchibanMoto]

vitaly deuterium that sounds like good engine break in advice too !

[@bloodyhell451]

I just wanted to check with you first. I guess it's better with fine grade to get the internal surfaces nice and honed. I'm on it !

[@MrBankshotone]

1w60 ??? Where can I find that?

[@OGKILLa9365]

you can put the oil filter in the dish washer

[@oebnina]

Are those the weldinggrade torch sticks? i only got multi purpose regular ones :-(

[@m3fnc]

ichiban Moto Love the torque wrench does it do Foot Pounds and Newton Meters ???

[@IchibanMoto]

+Fred Chance and Kg/M too !

[@biggest23]

Oh man, I'm going have to get a bigger face now to fit my humongous beaming grin.

[@davesstuff1599]

Where can I find some 1W-60 in my area?

[@IchibanMoto]

what is your area?

[@malachy1847]

Might be 10W - 60 multigrade oil..... 60W seems very thick oil for a bike think that 10w 40 would have been the range.... but maybe you are in the Desert with some seriously high ambient Temperatures.....

[@agostinaguerrini8329]

Badass genius

[@mohamedirbazeaffan9089]

No I have never tried for any after market exhaust.

[@popanollie1]

what do i do with my used coolant.

[@ArcanePath360]

Put it in your air conditioner.

[@strifeinc8388]

and does the coffee filter, mess with the oil press at all?

[@mikeydk]

My torque wrench only got the Nm, kpm, and lb/ft scales. Do you have some kind of chart so I can convert it into psi?

[@sethat8e]

badass!!!!

[@charged]

Itchythong, where can I get a Nickle Town customs catalog?

[@TempoDrift1480]

No Shit! I'm trying to get ichiban moto stickers. I gotta have 5 of them.

[@IchibanMoto]

+Wizzle five out of five ! bad ass awesomeness :D

[@mohamedirbazeaffan9089]

Hi I'm very new here. I own a YAMAHA Fz-16 and I want to make the exhaust sound louder but it should be genuine exhaust note. Can you please suggest me ?

[@IchibanMoto]

+Mohamed irbaze affan have you tried a Fz55 exhaust?

[@TheBatlleAxeWarrior]

Do you have to re jet the carbs when you're done?

[@IchibanMoto]

TheBatlleAxeWarrior Sometimes I just re-jet for the pure fun and excitement of it !

[@Ristakaen]

I can't find 1w-60, is it okay if I use SAE80 instead?

[@IchibanMoto]

I need to find my sae to w conversion charts

[@Mukeshmiktecrep]

You can mix 1w 40 with WD40 to make SAE 80.

[@IchibanMoto]

the maths make sense

[@Tony240zt]

Is it an issue if all I have are acrylic based paint cans?

[@IchibanMoto]

Tony - Diana Fruzza I don't think so. I typically use latex cans

[@jesieoledan5563]

@@IchibanMoto nice videos.i learned good advice just watching youre videos

[@gjmob]

The torques gauge that I made is metric. How do I convert P.S.I. into metric?

[@IchibanMoto]

i'll need to get the spork out and calculate

[@adslammer1359]

did you really use a coffee filter and duct tape for the filter

[@IchibanMoto]

+ADSlammer need to keep dirt out of the carbs

[@adslammer1359]

o, ok thx

[@TarpeianRock]

Pro Tip to save $$$ : ditch the expensive oil filters, stuff the oil filter cavity with shredded coffee filters : dirt cheap and keeps your oil super clean. No thank you ‘ s, you’re welcome.

[@CrazySteve42012]

Bro where can I get 1w-60 Oil ???

[@paulhewgill6624]

Your compressor is missing on one cylinder.

[@ChrisVons154]

wheelies on a automatic motorcycle. impressive.

[@brandiclay]

Nickel town customs😂

[@strifeinc8388]

there is an Aussie? guy Marlon. HOW TO change the oil on a sr500. it really funny

[@anastaciolopez7438]

Oh man. Too funny.

[@isaacsegura]

i thought you will use extra virgin dinasour oil

[@ikentfix]

i dont know if this channel is just trolling HAHAHAHA like WTF?!

[@tonyjeffery3]

your bad ass

[@MikeJones-oo7wi]

vice grips !!!

[@IchibanMoto]

+Mike Jones they are proper metric grips

[@slntscpe]

Sell the oil to your wife.... I mean sister

[@augustteuscher2910]

do not put paper in your oil filter

[@IchibanMoto]

it keeps the dirt out

[@Jshukes]

Is this serious?

[@IchibanMoto]

oh yes. never changing the oil will result in premature wear

[@mikeirwin5891]

Man screw using gas use water I heard it gives like 5,000 mpg

[@IchibanMoto]

+Mike Irwin oh, good point.. and I hear for old vintage bikes you can still get leaded water... in some places

[@mikeirwin5891]

+Ichiban Moto No shit huh

[@tpitman]

+Ichiban Moto Detroit has it on tap in every home at the moment. Fill 'er up!!

[@IchibanMoto]

+tpitman oh, yes ! I did see that on the news !

[@nominevacans8173]

that oil is so ugly.. 10yrs not changed?

[@IchibanMoto]

+Nomine Vacans I know, right ? ! >

[@laredotornado111112]

Have you been smoking that shjt. again?