How to change oil and oil filter on a Fiat doblo cargo van

How to change the oil and oil filter on a fiat doblo van and the reason why it is so important to do this at the correct service miles

[@tadeaszvalasska1823]

You saved my natural park cutting grass season, thanks!! :-)) Fiat doblo is amazing ride for off road as well.

[@buxvan]

Good video. I always write the date on the oil filter too. Cheers

[@JCTVAfrica]

Thank you so much for the video. I really enjoyed it. I wanted to see how to change the air filter for the same vehicle

[@richardshomemechanics5566]

Hi Jctv Your welcome 🙏

[@vanslowlee2186]

Thanks for the video, my doblo is due a oil change got all the bits from euros ready to go And never had a hex bolt big enough for the sump plug 🤦‍♂️ now I know the size thanks to you doing this video great help 👍😁

[@richardshomemechanics5566]

Hi Anonymous man I’m glad my video helped you and thank you for taking the time to comment on my channel 👍

[@johns9673]

So what size is the hex bolt? Did I miss that in the video? (It would be useful to state that at the point it is first used or in the video description)

[@tomberengersfinger]

Great video, thanks for taking the time to do this 👍🏻

[@richardshomemechanics5566]

Hi Daniel Your welcome 👍

[@matthewyu1875]

realy helpful, thank you

[@DicksSmallEngines]

Great video mate. Very well explained. I always use a strap to remove filters on my vans but that clamp you’ve got looks ideal ! Good work 👏🏻👍🏻

[@richardshomemechanics5566]

Hi Dick straps are ok but there’s clamps are much better in my opinion

[@DicksSmallEngines]

@@richardshomemechanics5566 I would definitely agree now ! 👍🏻

[@smiffdamista]

thanks for this fella , doing mine this morning now :)

[@richardshomemechanics5566]

Hi smith your more than welcome 👍

[@smiffdamista]

@@richardshomemechanics5566 followed you step by step easy to follow mate , thankyou !

[@themowerman]

Must do my van. It's well overdue.. good video mate

[@richardshomemechanics5566]

Hi Mick best you get down and dirty lol

[@abdulrahmansalim9773]

I f there is a clip for Vauxhall combo cdti 2005 how to replace head gasket please, thank you.

[@richardshomemechanics5566]

@@abdulrahmansalim9773 sorry unfortunately I have not done a video of replacement of head gasket on a Vauxhall’s combo van

[@wcraigburns3458]

Brilliant m8 . Even I can understand it . Thank you .

[@richardshomemechanics5566]

Thank you for the kind comment .. unfortunately I’m getting lots of trolls on here making horrible remarks about my videos seriously thinking of shutting my channel down now

[@wcraigburns3458]

@@richardshomemechanics5566 well you helped me out m8 . It's our society of keyboard heroes . Those who can't troll . It's hard but bear in mind they have no courage and low self esteem . Would you do what they do no Can they do what you can do No Old Glasgow saying fxxx them . Hope you see sense and carry on . These people are social misfits end off m8

[@iansmith5941]

No undertray? If so use copious penetrating oil as the little bolts at the front snap easily. Where's the drain plug, mine was a flat round head with a large Allen bolt and it didn't budge. Lucky me had to go to the garage!

[@wobbsjane5254]

Hi a quick question do u know where the screws are to replace the brake lights as our has been converted into a campervan and we're not sure how to change them. Thanks

[@richardshomemechanics5566]

Hi Wobbs Jane they normally undo from the inside of the the van and then remove the fitting from outside it may be that because yours has been converted to a camper van that they have covered the screw holes with rubber grommets or some sort of trim cover

[@wobbsjane5254]

@@richardshomemechanics5566 thankyou for the repy I appreciate it

[@richardshomemechanics5566]

Your welcome 🙏

[@tomberengersfinger]

Hi Jane, sorry to Hijack this thread! I changed my bulbs on a 2007 Doblo last week. You have to remove the rear speaker grills first, they slide towards you. Then either behind a rubber grommet( as Richard suggested) or not, there's a hole in the trim with a wierd looking nut in it. Use a socket with an extension bar and very carefully undo the nut. As it comes to the end, just use the extension bar to undo it as you can easily drop the nut inside the trim... When this is off, there are 2 Phillips screws on the outside of the light fitting. The bulbs are in the housing 😊 Installation is the reverse of removal!

[@wobbsjane5254]

@@tomberengersfinger thankyou so much I appreciate that

[@iansmith5941]

What size engine? What year? Are they different?

[@richardshomemechanics5566]

Hi Ian my Fiat doblo was a 1.9 diesel Thanks Richard

[@stevekesley1]

Is this a mk1 fiat doblo?

[@s1udgeguts]

Yes, he said it's an 02 plate

[@c.p3425]

A copper seal should be replaced because when copper is crushed it hardens.

[@richardshomemechanics5566]

Hi Cp You are correct you should always replace the copper washer as they do crush but in this circumstance it was Sunday afternoon and I was unable to purchase one .. it was tested and did not leak but copper washer seal will be replaced asap Regards Richard