Changing oil on your K1300S check out this video to see how it’s done. Should also work on K1200 as well.
Пікірлер: 73
@Aviopic2 жыл бұрын
Removing the drain plug first makes changing the filter a lot less messy 😉
@GordysGoodworks4 жыл бұрын
If you make an aluminum foil trough under the filter you can usually get all the oil that comes out of the filter in the drain pan without getting it on the headers
@daniellance68923 жыл бұрын
i know Im asking the wrong place but does anyone know a way to log back into an instagram account..? I was dumb forgot my password. I would love any help you can give me!
@angeloeduardo11123 жыл бұрын
@Daniel Lance instablaster =)
@daniellance68923 жыл бұрын
@Angelo Eduardo thanks for your reply. I got to the site on google and Im in the hacking process atm. Seems to take a while so I will reply here later with my results.
@daniellance68923 жыл бұрын
@Angelo Eduardo It did the trick and I now got access to my account again. I am so happy:D Thanks so much you really help me out :D
@angeloeduardo11123 жыл бұрын
@Daniel Lance no problem xD
@Nitriic3 жыл бұрын
I’ve got a 1300GT so this is REALLY helpful as I’m doing my oil change myself for the first time. Thanks Matt!
@MrBaltohusky4 жыл бұрын
Nice clear simple video with good audio👍🏼
@stephan8346Ай бұрын
Thanks for this very helpful video 👍🏻
@SleepySteve794 жыл бұрын
The chripin on the background is the ideal background sound for this type of video. Added to my k1300s video maintainance list :)
@reticul8r6453 жыл бұрын
Just a quick tip. According to the RSD there is 1/2 liter difference between the Min & Max marks. This is a fantastic bike with great sound and the quick shift is just plain fun.
@azr2d13 жыл бұрын
Can you quick shift on downshifts on this bike ?
@rudigerthuy90522 жыл бұрын
@@azr2d1 only upshifts!
@alanknowles11543 жыл бұрын
Great video ! The K1200 has the kickstand blocking the oil filter. Quite a challenge for a 71 year old man to balance a bike and remove a stuck filter at the same time.
@TheRedcroatian3 жыл бұрын
Don't you have a center stand?
@steves1865 ай бұрын
Center stand was an option. Most don't have them.
@stephan8346Ай бұрын
Maybe a center stand is a good return on investment versus getting the oil changed from a dealer and/or seeing the bike lieing down on the floor 😮
@jeffreycobbin15474 жыл бұрын
Excellent video and instructions, thanks Matt.
@chrisfox40275 жыл бұрын
very good tip to heat up the bike before oil change!!
@alanknowles11543 жыл бұрын
This K1300 is better than the K1200 I followed.1st Removing the oil from the top tank before draining from the bottom makes sense.
@SohanSwerneborg3 ай бұрын
Awesome! that helped me today. Can someone please explain why bmw k1200s have a oil reservoir instead of wet sump? There got to be a reason for it I mean.
@jeffuphill8874 Жыл бұрын
A big help to me with your vids , thanks 👌
@robertbrandywine4 жыл бұрын
Sight windows on a wet sump engine are a pain to look at because of how low they are, which is why I prefer a dip stick. You've got it easy on a dry sump engine.
@alanknowles11543 жыл бұрын
Thank you for the Wet / Dry Sump comment. I've owned Japanese 4s since 1970 and just bought a K1200 Removing the kickstand to change a filter made a simple task difficult. I wondered why there was so much oil left AFTER removing the drain plug
@bravoleo40252 жыл бұрын
thank you! i will use the same way on K1200s
@djerome25 жыл бұрын
Excellent video! Thanks!
@bobdobalina83818 күн бұрын
So wait how did the oil get flowing out through what seems to be a ventilation hose?
@mylord93403 жыл бұрын
Thanks for your video. I followed your directions and also opened the oil plug to let the oil drain from the bottom. The K1300S is supposed to take 4 liters with the oil filter changed. I added 4 liters but the oil level stayed beneath the minimum marker next to the plastic tube. Does that mean I need to add more oil until the level reaches between the minimum and maximum markers?
@MattsMotoWoRX3 жыл бұрын
If it’s on the low side just add a little bit
@mylord93403 жыл бұрын
@@MattsMotoWoRX I'll do that. Apparently between the low and high marker takes half of a liter. The oil level on mine is currently about the same distance but below the low level marker. I will add between 1/4 and 1/2 liter of oil. Thanks again.
@mylord93403 жыл бұрын
@@MattsMotoWoRX I checked the oil level at both the dipstick and the plastic tubing from the oil reservoir after riding the motorcycle for 10 miles. The level was where it was supposed to be on the dipstick and at the plastic tubing it was just above the minimum. So, no additional oil was needed. I simply had to ride the bike for a few miles and then immediately check the levels. Again, thanks for the well done video.
@MicMurphy19815 жыл бұрын
Hello brother thank you for the video. I have been looking at one of these bikes for a while. I see one where i live with low miles only 158 and mint condition i was wondering what kind of problems if any have you had? And how do you like the bike. The one iam looking at is a 2006 K1200s. Yellow and black. Its a beautiful bike but i am comming from Suzuki's ..lol if you go to my page you'll see the bikes i have owned in the past. Thank you
@Gabriel-kf4rj5 жыл бұрын
Hi Mat , TY for your videos .. Have you video about cooling replace ?? . Thanks ¡¡
@MattsMotoWoRX5 жыл бұрын
Gabriel I did make a video for the coolant change and bleed procedure
@colvilletitus10205 жыл бұрын
Why is it necessary to remove the oil line under the seat when there is a drain plug under the oil pan?
@MattsMotoWoRX5 жыл бұрын
Colville Titus To be honest it’s how BMW recommends it be done. Not sure 🤔
@colvilletitus10205 жыл бұрын
Matt’s MotoWoRX I understand but find it odd as the fluid will flow downwards regardless
@MattsMotoWoRX5 жыл бұрын
Colville Titus Next K1300 I have in the shop I will see if I can just pull the drain bolt
@colvilletitus10205 жыл бұрын
Matt, ok. I was just enquiring because where you have to pass the oil line, it can get damaged if one isn’t careful. Ok do let me know if it works but I think it would.
@flekbeita5 жыл бұрын
Because this is a dry sump bike, the drain bolt on the engine will release only the residual oil that wasn't pumped back up to the reservoir.
@tototiti19632 жыл бұрын
Hello. Thank you for you video. Do you know what size of tool I need to rémoise the oil filter please ? Is it a 74 or 76 mm. And how many facettes. 12 or 14 ? Thank for your help. Richard france 🇫🇷
@hercao55265 жыл бұрын
Hi Matt, I believe if you do not remove the plastic hose to drain the oil and only remove the bottom bolt + filter you can drain all the oil, am I wrong? Thanks a lot for the vídeos! Greetings from Brazil!
@MattsMotoWoRX5 жыл бұрын
Hercules Piazzo This is the way BMW recommends it be done. I am always open to new ways to try it. I’ll try just pulling the drain plug next time I get one in for service and see if works. Thanks for checking out the videos
@hercao55265 жыл бұрын
@@MattsMotoWoRX Thanks a lot for your reply! I will try too when I change the oil and let you know if I do it first 😉. Thanks again and greetings from Brazil 🇧🇷✌🏻
@robertbrandywine4 жыл бұрын
It's a dry sump system.
@TheRedcroatian3 жыл бұрын
@@robertbrandywine thanks!
@thecheesburgler4 жыл бұрын
Thx for vid
@GSXR1300X4 жыл бұрын
great vid. and thanks. Is the oil change the same for a K1200GT (2008)? I'm thinking it is
@MattsMotoWoRX4 жыл бұрын
GSXR1300X it’s the same as far as I know.
@Josieman5433 жыл бұрын
What's that tube you removed from the bike near the oil fill?
@MattsMotoWoRX3 жыл бұрын
That is the oil level hose.
@tmark1301cc3 жыл бұрын
Matt, what is the correct capacity? My owners manual states two different values, both say WITH a filter change. One says 3.5 l, the other 4 l.
@macliberal3 жыл бұрын
Hi my friend. 3,5L without filter change.
@azr2d13 жыл бұрын
Can you just skip the drainhose and only do the drain plug to drain oil ?? (and filter ofcourse)
@MattsMotoWoRX3 жыл бұрын
No because the oil is stored in the sump tank and it won’t drain back into the engine
@azr2d13 жыл бұрын
@@MattsMotoWoRX ah, ok. Good to know.
@seeul8rwaynekerr4 жыл бұрын
So is this a dry sump machine given how remote the oil filling location is?
@MattsMotoWoRX4 жыл бұрын
stuckintraffic?getabike! Yes it is a dry sump engine
@jackflowers9993 жыл бұрын
nice video ...whats the K&N code # filter? what oil do you use?
@MattsMotoWoRX3 жыл бұрын
Jake Lebon Part number is KN-160 I like to use the BMW brand oil for these personally but as long as it meets all the requirements for the bike it will be fine
@jackflowers9993 жыл бұрын
Thank you , nice videos
@jameswilliams59824 жыл бұрын
Why do BMW put a 12v socket by the gear leaver???? 🤷♂️
@mateuszgarus43494 жыл бұрын
It took me 2 days to damage charger 😒
@dariojozinovic39612 жыл бұрын
How much oil was roughly trapped in the oil pan ?
@MattsMotoWoRX2 жыл бұрын
Not much maybe 1/2 quart
@dariojozinovic39612 жыл бұрын
@@MattsMotoWoRX Thank you
@Incountry5 жыл бұрын
Let me point at the oil filter....
@6193derek5 жыл бұрын
There are like 47 videos on how to change the oil, in this bike, this is the only one that addresses changing the oil filter, and yet even this one compleatly skips over how to remove the fairing to get to the oil filter to begin with.
@MattsMotoWoRX5 жыл бұрын
Derek (D-Rock) Birch It’s because I broke the video into sections here’s the panel removal video How to remove bodywork from a K1300 kzbin.info/www/bejne/bpqtq3uIotNsj8U
@davidmcmillan84083 жыл бұрын
You do not need to remove the fairing to access oil filter. Sump contains only residual oil, so oil tank must be drained.
@MrsJessCombs3 жыл бұрын
yeah you dont need to remove the fairing to get to filter drain bolt or the sight line...