How to change rear brake discs / rear brake rotors on RENAULT MEGANE 2 (LM) [TUTORIAL AUTODOC]

[@autodocuk]

⚠ Attention! This video contains a mistake: 3:31 - the tightening torque is 105 Nm, not 85 Nm. We're sorry for the inconvenience.

[@Droneshare]

you didnt indicate the torque setting for the axle nut

[@marcushudson8061]

Thanks for your help, did this today and saved me paying a garage 😃

[@autodocuk]

Thank you for your feedback! We appreciate that you follow our tutorial and that it was useful for you. Please stay tuned for more! Best regards, Autodoc team!

[@msingizanengwenya6707]

Well demonstrated. Many thanks.

[@drnh4444]

These videos are absolutely fantastic 👍👍 really well done

[@autodocuk]

We are glad that this video was useful to you!

[@kibardinazor2087]

Hi Dear Friend I used the Bosch breake grease oil for hub lock nut screw. Is it dangerous? If it is dangerous, I can clean with brake pad spray then May I use the medium strength stabilizer for hub lock nut screw?

[@autodocuk]

Unfortunately, it is not possible to answer your question for sure, you can find out this information in the technical documentation for the repair of your car. AUTODOC

[@aakashyadav1366]

Sir your all video very helpfully.i am like your v

[@autodocuk]

Thank you for the feedback! We are happy that our videos were helpful and informative for you. Stay tuned for more. Best regards, Autodoc.

[@spitfire441]

Excellent video thanks for all the info helped me complete the job

[@autodocuk]

Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned for more! Best regards, Autodoc team!

[@autodocuk]

Have a look at other videos on our channel: 🔸 RENAULT MEGANE 2 car repair tutorial - kzbin.info/aero/PLWep5LzT0sxn6nG18knxG4k4To6CEFmhi 🔸 How to replace fuel filter RENAULT MEGANE 2 - kzbin.info/www/bejne/o5DRiGmun9WKes0 🔸 How to replace front anti roll bar link / front drop link on RENAULT MEGANE 2 - kzbin.info/www/bejne/q2XOnHdonM6Ljpo 🔸 How to replace air filter on RENAULT MEGANE 2 - kzbin.info/www/bejne/jKeqpamwqtVkask 🔸 How to replace pollen filter / cabin filter on RENAULT MEGANE 2 - kzbin.info/www/bejne/kGK5fqhpfKaKj7s

[@mleite2006]

well done

[@hiiiyou8678]

The torque settings are wrong. They should be 105nm for the caliper holder not 35!

[@autodocuk]

Thank you for your feedback! We appreciate your attention to the details. Our experts will look into it. Stay tuned for more videos in the days ahead. Best regards, Autodoc!

[@philschneiderapreciationclub]

Hiii You He already did the caliper carrier bracket bolts at 85NM. The ones you are referring to are the guide pin bolts. Do not do them up to 105NM. 35NM seems more more suitable.

[@SgtPimpek]

How much NM torque is the center nut for the wheelbearing in the brake roror to be tightend?

[@peterollerton3472]

Thanks doing mine soon not as hard as I thought

[@autodocuk]

Unfortunately, we do not have such information. AUTODOC

[@nekotreci]

Thanks! ❤️

[@johnlindley8323]

So what's the torque on the rota nut

[@autodocuk]

Hi! This information is individual for each car, it should be replaced strictly according to the manufacturer's recommendations according to the technical documentation for the repair of your car.

[@SgtPimpek]

How much NM torque is the center nut for the wheelbearing in the brake roror to be tightend?

[@autodocuk]

Thank you for your comment. All values ​​of the tightening torque we indicated in the credits. Best Regards, Autodoc team.

[@Roy0Bannon]

@@leonardhenriksson7369 That would be: 175 Nm - axle nut (220 Nm for the Estate and 225 Sport version) 105 Nm - caliper support bolt (not 85) 36 Nm - guide pin bolt Values are taken from a genuine Renault repair manual.

[@GreenPasture1]

Inconsistent torque values. You either show them all correctly or don't bother at all.

[@autodocuk]

Our videos are for guidance only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of the auto maintenance service.

[@snapdragogon69]

Thanks for the video, there are two styles of rear brake disc for the Megane 2 on your site. With and without ABS ring and bearing. Are these different fitments or with the cheaper ones they are the same fitment but the bearing and ABS ring need to be re-used/transferred over? Thanks.

[@autodocuk]

Thanks for your comment. Yes, there are several options for spare parts, in most cases, those options that are without a bearing and an abs ring are cheaper options when installing which you need to use an old bearing and an abs ring. Whenever possible, when replacing, it is recommended to use a spare part assembled with a new bearing and an abs ring. AUTODOC

[@alexey9900]

👍👍👍