How to change rear brake pads replacement with electronic parking brake EPB Caliper Using Autel tool

here we show you how we changed their brake pads on modern cars with electronic parking brakes that need a diagnostic system to put them into service mode and rewind the electronic parking brake.
this can be done without a diagnostic tool. see out video here to change without a diagnostic scan tool.
• 2 ways How to wind bac...

[@ORileysAutos]

Check our other videos for ways to do this without a scan tool kzbin.info/www/bejne/e6jTqpafbrCBhZo

[@Steve-ii7ns]

LOL did you correct the way you fitted the pads? The inner pad has a fixed spring, the outer pad does not. On the first side you changed you fitted both pads without springs, whoops!

[@davesmith6734]

Great information on changing rear pads, but one thingi spotted is you using an impact gun on the locking wheel nut, in my 35 yrs owning my own garage I've never nor do my mechanics ever use an impact gun on locking wheel nuts always a knuckle bar .

[@niklasasplund5155]

Much appreciated, really helpful to avoid extra time and thought. Will change today and tomorrow and it's below freezing so don't want to stand outside more than necessary :)

[@ORileysAutos]

Thanks for watching

[@rileysanimalfarm3039]

Thanks for taking the time to do this. At least I know what to expect and don't need to waste time wondering how to do it and find stuff

[@ORileysAutos]

👍🏻

[@careyautorepairs]

Nice. Them clips are a pain in the butt to get back on Jimmy.

[@belchnasty]

I'm just about to tackle this on a 2017 Alltrack. Thanks for posting! Subscribed!

[@ORileysAutos]

Thank you for subscribing

[@febl]

The wheel lock should be used only with a hand tools newer with power tool, because you will eventually strip the grooves on the key. Ask me how I know!? :D

[@joelenebrown2332]

Great video's very very helpful!! Om going to tackle a full service on a 2013 passat cc including break pads. Would you be able to list all the connections needed for this please 🙏 like t25 torx for air and fuel filters etc everything i need!! Much appreciated.

[@momo4263]

Hello Nice video I will follow your instructions. Could you please share the references of the brake pads ?

[@kimquyluu6771]

Thank you share clip

[@GC-fk6vz]

What are your options if the caliper piston boot is damaged?

[@mohammedshafiq4053]

One day it will leak change it

[@AlanCooney]

Nice video! Thanks!!

[@declanharty3922]

Very helpful

[@ORileysAutos]

Thanks for watching

[@frankf.jr_navajoartist5836]

Will a two ton jack work?

[@DaickersVideos]

Do you turn the car on just to release rear calliper and then do you turn the car off

[@DaickersVideos]

Also do you need a diagnostics tool

[@frankf.jr_navajoartist5836]

What is size for rotor on the sockets

[@pgfarnham]

WD 40 near brakes? Area not cleaned with brake cleaner, no coppaslip on the pads. Otherwise, good job.

[@mphedimoganedi796]

Hi.... Is it possible to change it without diagnos machine.

[@ORileysAutos]

Yes.. kzbin.info/www/bejne/e6jTqpafbrCBhZo

[@seamusmechanic9198]

Great channel 👍🏻

[@ORileysAutos]

Thank you Seamus

[@boyanratchev877]

Thanks for the useful video. Can you list the tools that you used like I got for the upper bolt it is allen key 7mm, but what is for the bottom one, the same? Any spline key needed? Thank you

[@ORileysAutos]

7mm Allen. Flat screwdriver. Jack. Axle stand. Autel Maxidas DS808. Bottom bolt is same as top

[@nazmalik82]

Very good

[@ORileysAutos]

Thank you

[@fakemechanic7427]

Good Job 👍

[@ORileysAutos]

Thank you

[@alexanderstefanxandraswedi5835]

Great

[@ORileysAutos]

Thank you

[@backpack247]

Do you need the diagnostics kit to replace pads?

[@ORileysAutos]

There are ways to get around this by watching our other video... kzbin.info/www/bejne/e6jTqpafbrCBhZo

[@backpack247]

Great video. Simple explanation. Many thanks

[@ORileysAutos]

@@backpack247 no problem

[@frankf.jr_navajoartist5836]

Why don't they have 2021 Jetta on KZbin....how to change brake pads

[@ORileysAutos]

It won't be any different from the older models

[@frankf.jr_navajoartist5836]

I can rent the speader from o Reilly's right?

[@solydaveng1719]

great

[@ORileysAutos]

Thank you

[@frankf.jr_navajoartist5836]

M14 socket is correct tooole

[@cosminradu7397]

You need to clean the calipper and all.

[@frankf.jr_navajoartist5836]

Didn't need to kick mines

[@frankf.jr_navajoartist5836]

You don't need that tablet

[@thewelshwizard5869]

Surprised you didn't clean anything, use any brake lube on new pads, and the inner pad didn't have the retainer springs on the new pad like the old one did?

[@frankf.jr_navajoartist5836]

All you need is a toy battery