2 ways How to wind back electronic caliper without diagnostic computer on EPB parking hand brake

[@aswclassicsiow8588]

Did a 5 year apprenticeship from 1970 to 75, with a Ford main dealer, left the garages in the mid 90s, for better paid job and now retired, never worked on EPB's as never came in until 2001, thank you for showing how to do this, never to old to learn, a great video

[@ORileysAutos]

Thanks

[@readytohithotfiyah613]

Undo electric wire, by poppin its safety clip. use 5mm hex and remove motor behind brake. then remove Caliper. if caliper and piston are too tight, use 5mm hex in the back of the piston winder, turn clock wise. once caliper is off then use c clamp on piston an tighten till resistance. turn the 5mm hex clockwise again till resistance, then turn c clamp more till the piston is retracted. do brake pads and chassie, once set an lubed, mount motor back on piston. then place caliper back. just did a set of backs, no codes no issues. its called a manual reset.

[@rajeshmann]

May be sound stupid but you can try with engine on , because sometime if you you do one wrong connection or your negative positive terminals touch by mistake , these vehicles are very sensitive and end up having bigger issues .

[@nick600d]

Brilliant. Easy and informative without telling us your life story. You’re a legend.

[@sharkattack6423]

I agree👍

[@jamesworsham2312]

Just a question here it was you have to have the correct procedure. My question is when you install caliber question is do you pump the brake pedal to get brake pill before engagement electronic are you do you just engage hey Google to engage f****** break are you trying to know if I should pump my brakes like we always did and make sure I get a pedal then then do you engage parking brake Tuesday navigation

[@katiemae5876]

You are a real MVP sir. A hero to be exact. You really saved me with this one. You are truly appreciated. Thank you 🙏🏽. May goodness and mercy follow you all the days of your life.

[@ORileysAutos]

Such a nice comment. Thank you 😊

[@bwghall1]

I totally agree, you would make a lovely mate, Honest, reliable , clear and concise . Many many thanks. May you live long. blessings.

[@SeosamhMacUaid]

this video should have a couple of million views, fantastic content, glad to see a fellow Irish man helping others and doing well for himself at the same time.

[@ORileysAutos]

Thank you

[@niunius591]

Still not many cars had EPB !!

[@markgilder9990]

Thank you. Dealership wanted £646.11 to replace front and rear pads on my Nissan Qashqai. I bought pads Brembo £125. Did the job, no problem. Thank you once again.

[@ORileysAutos]

Glad it helped

[@walterbates1654]

Best one yet. Others run electric with caliper off, then have to push piston back some other way. This is simplest. Well done.

[@MrCoalcracker79]

Thank you, brother. I was baffled by opening the caliber in order to fit it over the new brake pads. You sir are a savior.

[@ORileysAutos]

Glad I could help

[@RichardOutdoors]

Pal you just saved me £230. Made the simple lead and powered it from the cig lighter socket. Worked a treat with powering the piston in. After that - simple job. Really appreciate the video. 👍

[@ORileysAutos]

So happy to hear it helped you. Thanks for taking the time to comment 😁

[@MrWFD21]

Used your video to do my rear brakes on a 2020 Nissan Rouge with EPB. I used the battery and wires method. Worked perfectly. Thanks!!

[@eddiehaymaker9741]

This video was an absolute godsend. Save my bacon. Thanks so much. Really appreciate guys like yourselves taking the time to put this onto KZbin. Thanks.

[@ORileysAutos]

Thank you so much for coming back to leave your nice feedback 🙂

[@jgoyena]

I'm about to purchase a scan tool that can release the e-brake, I'm glad I saw this today. Will do my first blake pad replacement after 32k kms

[@ORileysAutos]

Glad I could help

[@shanehall3794]

Fair play lad you have saved me the ball ache of paying someone to do it. Great video and brilliant explanations

[@ORileysAutos]

Glad it helped

[@FoookYourfeelings]

I asked a garage if this were possible so i could do my own brakes, he said it wouldn't work... Knew it would, top man. Just subbed 👍🏻

[@eamoncummins8419]

Just a note on this. I’ve just done a 2017 Nissan trail. I had to power up the motor and close the pads onto the disc before the handbrake would reset. The hand brake switch was flashing at me and wouldn’t work until I powered up the motor and closed the brake. Great video cheers for that

[@Tommytomboy100]

Your vids are brilliant man, novice here who’s trying to learn all the time, amazing tips from lots of your vids

[@nautitard]

Thanks a lot. Helped me out in a pinch when I promised to help someone change rear brake pads. Never saw a car with electrical handbrake before :)

[@ORileysAutos]

Glad it helped

[@sportsworth]

Technique #2 saved the day for me. Very easy and reliable method. Thank you!

[@ORileysAutos]

Thanks for coming back to comment 😁

[@JamesSmith-tv3pz]

Excellent advice and step by step guide. My only suggestion here is that some EPB equipped cars first need to have the EPB 'parking on' turned off, before working on the rear brakes, as some EPB's automatically apply themselves as soon as you exit the vehicle/open the door.

[@anthonyferruggia9362]

my friend,you are by far the smartest mechanic &the easiest to understand.The way you explain things is straightforward &in layman's terms. thank you so much for posting these very important videos for me to be able to fix the car with EBP brake system.Btw, I like your accent.The way you say Car is very Boston sounding with less R&more ah😂

[@ORileysAutos]

I did spend a few years in Boston growing up

[@Salvador312]

This is awesome, so detailed, great video. I am know you helped many DYI people with your videos. I have been working on my cars for years. Thank you for teaching us something new, specially to those that rather do things ourselves, I wish you many more views.

[@ORileysAutos]

Glad it was helpful!

[@DogToffee9]

About to do my wife’s 2013 ds4 rear pads, feel a lot more confident having seen your vid, thank you very much 👍🏻

[@SKALS-ICY-TOM]

I will give this a shot. Getting a mechanic to do it with the diagnostic tool is wild 😊

[@davidjenkins3786]

Great help. Just what I needed to know. I'd struggled for a couple of hours before finding this!

[@harshadrobertnaik548]

Brilliantly demonstrated by you mu dear friend and I am going to replace rotor and brake pads on my Vauxhall Grandland x turbo diesel.Garage wanted £360 to do it. I all the parts for £ 120 from Halfords. I just want to thank you for your help with this project.yours Bob Naik.

[@ORileysAutos]

Glad it helped

[@edwardabrantes2520]

Thanks bro for the information process step by step your knowledge is highly appreciated, there’s some mechanics rip you off not been honest for there job

[@ORileysAutos]

Glad to help

[@badrallach4792]

Showing us both ways in the one video, fantastic. Thanks for that, your a star. 👍👍

[@ORileysAutos]

Thanks for your comments

[@JL635D]

Excellent tip using battery to drive back the EPB motors. Worked perfectly on BMW X1 2016 F48 diesel. Foxwell NT530 was supposed to do it but didn’t. Very many thanks for posting this video. It has saved me much heartache and gnashing of teeth.

[@ORileysAutos]

So good to have your feedback. Thank you

[@kevinpalmer7452]

Really enjoy your videos from a fellow mechanic 45 years in the trade

[@ORileysAutos]

Thank you

[@mankev9255]

Thanks for the video really helped me out. Heads up for any Nissan owners with electric parking brakes, make sure you order pads and rotors that specifically state that they are for electric parking brakes in the description. eBay is much better at including this information than Amazon.

[@ORileysAutos]

Glad it helped you. Thanks for the comment

[@TheOriginalDaveJ]

This was the very first video I watched of yours. I needed to do the rear discs and pads on my wife's 14 plate Qashqai. Having done them before I ruined discs and pads in 6 months as the EHB hadn't been set correctly. I used option 2 and the video was very very helpful.

[@ORileysAutos]

Glad it helped

[@sparkofinterest81]

Thank you thank you! Just did an audi 2013 a6 premium quattro 2.0 by removing the motor. Excellent tutorial!

[@franciscocruz8686]

I did the 2nd option on my 2016 Honda Civic EX-T after thinking it would be like any other brake job I've done. THANK YOU! Its a bit tricky but it will compress at least it did for me and no issues after I just turned my EPB on and off once everything was back together. No lights on the dash NOTHING. Probably going to invest in a scan tool, but there's nothing like knowing a way around the CPU.

[@standonald5145]

Hello there, iv just come across your video for electric handbrake rewinding, i have to be HONEST WITH YOU i was loosing sleep about this issue, i thought i was going to be charged a fortune for having my rear brakes done as both sides need discs and pads , YOU SIR ARE A GENIUS , PLEASE KEEP UP THE GOOD WORK YOU DO BY HELPING MOTORISTS THAT CANT AFFORD GARAGE BILLS, AND MOST OF ALL BE SAFE WHILE WORKING ON CARS , AND DRIVING ON THE ROADS WITH ALL THE OTHER HALFWITS THAT GOT THERE DRIVING LICENSE OUT OF A LUCKY BAG S.

[@NRReaper]

Great video, simple and straight to the point, lots of useful information.

[@markwallis7199]

I did it this evening in under two hours. First side took longer of course. I just wound it in using the Torx 4.5 and all was good so thanks.

[@ORileysAutos]

Thanks for the feedback 🙂

[@lewisjacksonv]

What a great video. Thank you. I’ve always worked on my own cars but I’m about to change the discs and pads on my first car with an e brake. This info was priceless. Good man yourself. Happy new year. Thanks again

[@ORileysAutos]

Glad it was helpful!

[@sixmagpies]

Blimey O'Reilly! Thank you so much ... saved me having to beg, borrow, steal or ... heaven forbid ... shell out for a new computer. Thank you again.

[@ORileysAutos]

You are welcome!

[@mrright8794]

Did my 5 year mechanic apprenticeship started in 68. Cars now days are like spacecraft compared to what i worked on.

[@craighooton8174]

Excellent video - found you just in time too...worked a treat....£150 labour bill just saved...............definately worth a sub

[@ORileysAutos]

Thanks for taking the time to come back and comment 🙂

[@tonymac7706]

Doing my rear brakes this weekend coming, was about to buy an OBD11....won't bother now😊..thanks for the straight to the point info... 👏

[@Peekawho]

How did you get on pal?

[@tonymac7706]

@Peekawho perfect and thanks again

[@perryschoeff4482]

Good video recently bought a car with electric parking brake was wondering how I could continue to do my own brakes thank you very much

[@jaimesan2609]

That makes sense to me. Two terminals, reverse to drive one way or the other. Very practical.

[@ORileysAutos]

Yes standard DC voltage rules. Reverse polarity equals reverse gear

[@mehdiberka1519]

A perfect presentation, a masterpiece in the whole Web, this is a real mechaniker. Thousand thanks.

[@ORileysAutos]

Thank you

[@hcoach1A]

Thank you for posting this! It saved me a lot of time and money! This is the same principle on any modern car or truck with electronic parking brake.

[@ORileysAutos]

Glad it helped

[@StevenRiddiford]

This is how things should be explained in simple terms brilliant 👏

[@sajmirza6785]

Excellent video and well presented. Clear and concise!

[@epostiljon]

Hats of for you sir. Just what I wanted to find tonight. Came home and felt that the rear brakes where really hot. So I hope this is the way to adjust them aswell? It is an Hyundai i40 2013. Thanks

[@ottofumbler7267]

Removing the two bolts holding the electric motor onto the caliper definitely works - tried and tested. Thanks for the upload 👍🏻 However, if you go down this route, make sure everything is completely clean before disassembly, as you don't want any contamination inside the assembly. Jet wash inside the wheel well, use soft brushes around the caliper, small brushes for the tight areas, and plenty of brake cleaner, then you'll be able to remove the handbrake motor from the caliper.

[@ORileysAutos]

Glad it helped

[@ottofumbler7267]

It did, absolutely. Pity though when I got to the caliper carrier to do the discs, the bolts were seized. That was supposed to be the easy bit. Finally got the job done with a bolt extractor socket set and plenty of heat.

[@Salzouby]

Wow, where have you been when i need this great video last time i changed the breaks on my VW with electric breaks.

[@ORileysAutos]

Always a next time 👍🏻

[@roberteisavi6578]

This video saved me hundreds of dollars . It works! Thank you!!

[@ORileysAutos]

Glad it helped!

[@topgun52]

Thanks 4 Sharing! Even though I have a scan tool it's good to know alternatives. Thanks again!

[@RonReece]

The two wire set-up worked great! I thought I was going to have to buy an expensive scanner, or worse yet, have to take it in to the dealer :( Thanks again!

[@ORileysAutos]

Glad it helped

[@seshachary5580]

thank you for the clarification that EPB moves only slightly with inside switch. awesome video. Regards

[@ORileysAutos]

Thanks for watching

[@harold6863]

Great video from a retired mechanic.

[@ORileysAutos]

Thanks 👍

[@safeswitchelectricalltd9311]

Superb! Saved me with this! Topman, very grateful.

[@DrivingTiMe121]

👍👍👍👍 great video. thank you for showing more than 1 way of doing electric brakes!!!!💪💪💪💪

[@glennr9913]

Great video. Thanks for showing us these tricks.

[@michaelsaia7413]

Thanks a million, this was the workaround I needed. Thanks for posting.

[@ORileysAutos]

Glad it helped

[@mantasdanielius3469]

I might testing this tonight 😂 simple hack welldone !

[@ORileysAutos]

Have fun

[@childofthe60s100]

EXCELLENT!!!! Very clear - very informative - very helpful!!!! Thank you for taking the time to show this!

[@ORileysAutos]

Glad it was helpful!

[@Dododaler]

you save me lot of money, thank you, cheers from Australia,

[@X055_s5]

Thanks for this video! Gonna save me a whole bunch when it comes to changing my pads & Discs on my Audi S5!

[@ORileysAutos]

Thank you for your support 🙂

[@outdaboxent9338]

I used the first technique to release the parking brake and was able to successfully change my rear pads and rotors on a 2019 VW TIGUAN. (I also did a brake fluid flush and bled the brake lines.) So thank you very much . The only thing is now I have the VW TRIANGLE WITH THE EXCLAMATION POINT symbol on my dash. I scanned I got codes : C10E129 -PARKING BRAKE MOTORS -IMPLAUSIBLE SIGNAL C100D13 - LEFT PARKING HRAKE MOTOR VOLTAGE SUPPLY - OPEN CIRCUIT C100E13 - RIGHT PARKING BRAKE MOTOR VOLTAGE SUPPLY -OPEN CIRCUIT I reset the parking brake after the repair using the parking brake button (engage/disengage two times) It seems to be fine. I’m thinking I need to make sure the connectors for the parking brake are firmly pushed in. The Brake Fluid Reservoiris full 🤷 Any suggestions would be helpful 🙏🏽 Thank you

[@stephenbeamis1151]

Really good well demonstrated and no faffing around thank you 😊

[@ORileysAutos]

Glad it was helpful!

[@captainhaddock2137]

Nice, straight forward and to the point 👍

[@stevenrivas9110]

Saved me $200 thanks

[@ORileysAutos]

Thank you

[@austinbravoaldama3990]

Thanks for your Video really good 👍 info I will need it Since my Audi Parking brake will not release and I don’t have VAGCom. Thank you 🙏

[@seamusmechanic9198]

Great channel 👍🏻 Best KZbin mobile mechanic. Channel

[@ORileysAutos]

Thank you 👍🏻

[@hamir1965]

Thanks, exactly what I was looking for. Much appreciated 🙏

[@ORileysAutos]

Glad it helped!

[@keithmatthews9043]

Thanks I found that very informative, never occurred to me 👍

[@ORileysAutos]

Glad it was helpful!

[@mobilemechanic3161]

Wow learning new tricks from you again mate

[@ORileysAutos]

Thanks for watching

[@tomhelsby5546]

What a very easy way of doing it. Thanks very much

[@ORileysAutos]

You're welcome!

[@stuffoflardohfortheloveof]

Brill. Thanks for this. Going to try it for first time so very, very apprehensive 😳

[@ORileysAutos]

You can do it!

[@stephenormsby3662]

Awesome. Thanks so much. This really helped me out when I was in a jam.

[@ORileysAutos]

Thank you for coming back to comment 👍🏻

[@Godot_19]

Hello O'Rileys! I’m so glad I found your video, because I urgently need to replace the Passat’s rear brake pads, but I couldn’t push the brake cylinder back to its original position. My question is, do I need to calibrate for new deposits or do I set up on my own? Thanks for uploading, you solved my problem! Attila from Hungary! 👍☺️

[@ORileysAutos]

Did you put new brake pads? It won't need calibration

[@Godot_19]

@@ORileysAutos Yes, I'll upload a new one using your video! ☺️ Thanks for the quick reply! 👍

[@johnnoonan5802]

Great video your going to have lots of viewers looking at this video for sure , good tuition and many many thanks , may i ask what is holding on the brake calliper carrier is it 2 bolts or splined machine bolts , as im just woundering whats holding the carrier , thank you again

[@ORileysAutos]

Thank you. It's usually 16 - 18mm bolts on most caliper holders

[@jesseymitchell1359]

I just used a caliper press and turned and pressed them in worked fine

[@MokwenaNicKag]

Thanks for posting this video. I'm looking to replace my rear brakes. I purchased a 12V 2A battery charger to try. I don't know if it will work

[@marcolino6294]

Now that make sense very simple than reading the instruction LOL. Thanks

[@Santiago-je5ki]

Just got me a scanner to do my vw, time to return it, as now i know how to do it without the scanner. Subbed, great video.

[@ORileysAutos]

Thank you

[@spelunkerd]

Well explained. Like any good teacher, you show multiple methods to accomplish the same task. In older systems, we would wind back the piston with a special tool designed to rotate the piston. Is there any reason to do that with electric E brakes?

[@TeezerDriz]

Manually winding back or pushing back the caliper piston on e-piston systems will damage the motor. Manipulating the motor position first, allows the caliper piston to then be moved.

[@stormnation6387]

Fantastic video, very informative, Thank you so much.

[@ORileysAutos]

Thank you very much for your support 😊

[@royjames5649]

Brilliantly explained, well done 👏

[@LondonCarnaval]

Awesome 👌 Super 🆒️ 👌 👏 👍 🙌 Thank you for sharing with us 👍👌🙏

[@ORileysAutos]

Thank you too

[@1salvagepeet]

I would like to thank you for this smashing video how to.....!! This saves me a sh.. load of money that a dealer would have charged me. Thank you, thank you thank you!! Besides the above, could you be so kind to provide me with 2 video's (links) in which you show and explain the replacement of the front and rear discs of an Vauxhall (Opel) Insignia 2016 or simular? A lot of thanks in advance.

[@abdoulounis4731]

Really we appreciate your talent thank sir you so professional.

[@bigmac1598]

Hi. Great vid. I have just one question. Why not put the parking break off with the button as I can do this on my scenic and Laguna?

[@ORileysAutos]

That doesn't allow you to fit new brake pads. Just releases the parking brake

[@mitchpeters8984]

Looks like my BMW has 3 connectors / pins instead of 2. Any idea how to approach the retraction using your #1 method? Cheers

[@migueltrejo6614]

Great video!! Quick question, Was the EPB engaged when starting the service or not engaged?

[@ORileysAutos]

Not engaged.

[@ghostart1]

Hi Jimmy, great video. Thank you. Two questions, will the manual system work similarly on a 2014 VWGolf? And have you ever heard of the battery method causing problems to the ecu? Thanks again.

[@MasterEsmaili]

Holy... never knew this! Thank you so much!

[@ORileysAutos]

Thanks for the support

[@timothybeckett]

thanks for your guidance got what i needed from you fantastic and easy to understand

[@pangoy2187]

do we have to disconnect negative terminal first when removing that wire connector?

[@Adam-oy1vp]

Great video. Informative and useful. Thanks 👍

[@ORileysAutos]

Glad you enjoyed it!

[@wilmawhelton3492]

Great nuggets of useful information, very well presented. Thank you.

[@ORileysAutos]

Thanks for watching

[@allardsylvain2773]

Hello, thanks for this good video. Is it the same for all cars likes renault or Citroen ?? Does it change something of the calibration of the piston position ?? Is there a risk of error message on the bord ??Thanks in advance.

[@ORileysAutos]

It should calibrate itself. I've done thus for years and always worked. Almost all electronic brakes are the similar.

[@allardsylvain2773]

Thanks for your support and quick answer.@@ORileysAutos

[@davidpoole3868]

Thank you, that was so helpful. Gonna be light work now.😊

[@ORileysAutos]

You’re welcome 😊

[@kevinmarshall8590]

Thank you brilliant video saved me a headache

[@damiantuttle1348]

Jimmy you're a star 🌟

[@nazmalik82]

I was always told there was no way to do this and its impossible without a premium diagnostic tool

[@ORileysAutos]

Hope it helped

[@harryrivers3191]

Not all heroes wear a cape! You sir are a hero!