How to change replace headlight bulbs Toyota Highlander 2013-2019

[@johnnyvlee]

Thanks! I haven't changed a headlight in ages, and I thought you still had to worry about screw/spring adjustments for a large bulb, aiming etc. Your video made me realize this is CAKE! Changed mine today in about 30 seconds.

[@rbaxter982]

Thank You! I noticed a headlight out and had to drive through rural CA back to the hotel. Saw an autozone got the headlights and replaced both in 5 min

[@jasonedonick]

Thank you sir. This was straight forward and worked like a boss.

[@cuttingedgedds1]

So simple to do after watching your video, but had no idea how to do it before I watched it! Thank you!

[@johnriddle6658]

Thanks! The stock bulbs on these cars are crap. I prefer headlights that burn with the light of a small sun :)

[@kaitlyndavis2840]

So easy!!!! Used a key to get the cap off, but yeah thank you for your help!!!

[@1995dlink]

How about low beams? Seem hard to get to.

[@jeansandmyshirt]

what year is this highlander? because 2016 highlander has dust cap for low beams

[@jman2354]

Great video man, helped me out alot!

[@joemariechua6345]

There 2 types of bulbs, 9005 & H11? I would like to know where is exactly the location of two bulbs? Thanks!

[@Amack1705]

Thank you for the video.

[@michaelzhang6383]

Are they halogen or LED?

[@Criscencia]

Thank you kindly! Very helpful🙏

[@quykiensau8064]

Thanks for the instructions.

[@barrymanilow2205]

Dude. Needed help getting to the right low beam. Washer fill in the way.

[@bethmerrill9828]

Awesome instructions!!

[@b.e.beldin1987]

NOT simple on the passenger side due to the position of the windshield washer reservoir filler pipe. According to the owner's manual that pipe must be loosened and moved to allow access to the light bulb assembly. Otherwise, removal/replacement is identical to the driver side assembly/bulb.

[@idiotJERK101]

O lal shqiptare je??

[@srunhodge]

Thank you so much

[@jonsterling5019]

All you need to know and fast!!

[@ddanramos4206]

Yep...this worked... theres also a grey cap about 3 inches in diameter that you need to twist off before you can get to the harness that holds the bulb...FYI..

[@samarparmar]

Thank you sir

[@slmrn98]

Thanks!

[@garretvanhorssen7089]

Thanks man

[@ScottPrincePhotography]

Not the same setup on a 2017. Worse damn thing I’ve ever seen

[@setshow9135]

Thank you

[@Вадим-з4ж7с]

😊thanks

[@ddanramos4206]

Thanks repairED

[@basslifexxl2391]

bulbs dont just pop str8 out pow brakes everywhere

[@chukwuyemmartinsonyisi9552]

Thanks

[@masterdilligaff]

DON'T EVER TOUCH HALOGEN BULBS WITH YOUR FINGERS!!!!! WEAR RUBBER GLOVES!!!! Oils from your fingers can cause the bulb to prematurely burn out or shatter.

[@johnredcorn5570]

Miigwech (thank you)

[@altayaltay2028]

👍

[@orlandomansur9950]

Thanks!!!