How to Replace Headlight Assembly 2014-2019 Toyota Highlander

Buy Now!
New Headlight Assembly from 1AAuto.com 1aau.to/ic/1ALHL02431
This video shows you how to install new headlight assemblies from TRQ on your 2014-2019 Toyota Highlander. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2014 Toyota Highlander
2015 Toyota Highlander
2016 Toyota Highlander
2017 Toyota Highlander
2018 Toyota Highlander
2019 Toyota Highlander
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obkz/1AXAA00013
• Phillips Head Screwdriver 1aau.to/obkz/1AXAA00013
• 10mm Wrench 1aau.to/oWa/1AXAA00010
• 10mm Socket 1aau.to/obb4/1AXAA00017
• Circlip Pliers
• Ratchet 1aau.to/obB3/1AXAA00016
• Gloves 1aau.to/o84/1AXSS00048
• Painter's Tape
• Safety Glasses 1aau.to/o2h/1AXAA00343
• Pick 1aau.to/oPH/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@driline]

Umm....yea..... I'll keep the original lights and deal with the faded headlamps. What a job! Not like the old days when glass headlamps were a breeze to replace. Next thing you know we'll be dropping the engine just to replace the oil pan bolt.

[@jacoballen7055]

Thank you! I thought it was a bit ridiculous at first but those side bolts on the headlights are impossible to get to without removing the bumper. Followed this and it’s really not bad at all apart from the typical aged clips being brittle. Took about 1 hour start to finish, and could definitely be quicker if you study this video first and have the right tools ready to go. Thanks again!!!

[@Peponlikespeson3684]

Those side fender bolts are the main issue, and reason for the whole bumper removal. Insane.

[@AL-bi6bp]

I'll give you an A+ You demonstrated the entire job

[@kevmoneybeatz]

Yoooo it’s gots be better way all that for a light smh you the man

[@rj8569]

thanks for the video but ill just get a restoration kit for this one

[@rtucker1004]

Is the 2011 Highlander similar?

[@vignessmusic4679]

Preposterous.

[@matthewobermeyer5954]

It looks like most of this is unnecessary. I’m going to check other diy vids about the Highlander without this guy with the blonde topknot. I am willing to bet this headlight assembly comes right out but removing just a few top bolts. No reason to remove any splash whole shields or the whole fender! Please explain, when you just loosened two or three top bolts and with nothing in the way (even if the fender were there) the headlight just slid out? Why make a deceptive video like this to make the job 100xhardwr than it actually is?

[@jud-asinsmith-stansell2022]

That makes no sence.. u put wax on to put tape on. 😵‍💫

[@iNtake87]

Looks pretty damn easy to me.