This video should have way more views. I watched a couple other videos, one from a big bike channel on how to remove brakepads and they were useless. Didnt account for this setup on an ebike. I didnt want to have to remove my wheel and couldnt put the brakes in from the top. Your video saved me a headache. Subbed and liked. Absolute champion 🏆
@rwent13 жыл бұрын
Nice video. I really appreciate that it's short and to the point. There were several times that your hands blocked the camera, so it was kind of hard to tell what you were doing.
@lonerbikes3 жыл бұрын
Thanks for your comment, i will try to correct it in future ☺
@Gromitdog1 Жыл бұрын
While mostly good i do not recommend putting liquids into the threaded holes as if you put too much you could hydraulically split the casting or strip the threads if you put too much in as you tighten the bolt. A drop on the threads of the bolt is more than enough.
@dawolyan133 ай бұрын
Nice video!! Thank you!!
@xSkasusАй бұрын
Thank you! :)
@A_nthony6 ай бұрын
No i jak te proxy sprawdziły sie? Da rade do tych mt200 zamontować klocki półmetaliczne? oczywiście przy tarczach do nich dostosowanych. Shimano twierdzi, że mt200 są kompatybilne wyłącznie z klockami żywicznymi, no ale nie widzę przeszkód żeby nie montować innych jeśli tarcza będzie odpowiednia... Świetny patent z zaciskaniem klamki trytką, dzięki!
@lonerbikes6 ай бұрын
Dały rade, szczerze mowiac nie zaglebialem sie w to, skoro produkuja klocki tego ksztaltu ktore pasuja do tych zaciskow to ja nie widze przeszkod zamontowania polmetalicznych klockow 😃
@steveisaac92852 жыл бұрын
Very good video. One complaint tho, use crocodile straps to secure the brake lever. Unnecessary waste of zip ties ( not mention throw away plastic.)
@lonerbikes2 жыл бұрын
Yep good idea to use it too 🙂
@abdulrahmanreciteation3 жыл бұрын
Hello awesome video one question I hope you see this I just bought mt200 1 day ago and the cable was long so I was cutting them and lost a bit of fluid and it was my first time having hydraulic brakes as well but I topped it up with baby oil because it’s lockdown here and couldn’t get brake oil and my breaks don’t feel the strongest like my wheelies won’t skid and they don’t grip the best can you find a way to fix that soultion is it of the oil I put
@lonerbikes3 жыл бұрын
Hello Friend, you should top up the brake fluid and at the same time bleed the brakes, is the brake handle soft or hard when you push it in?
@abdulrahmanreciteation3 жыл бұрын
It’s a bit soft
@abdulrahmanreciteation3 жыл бұрын
Like I have to pull have way not all the way t9 the handle bars but there soft so like I can push hard but they won’t lock
@lonerbikes3 жыл бұрын
@@abdulrahmanreciteation if the handle falls, it does not resist when pressed then you have to bleed the brakes
@abdulrahmanreciteation3 жыл бұрын
Ok thank you very much
@timothycole9232 Жыл бұрын
i have a bike with the same brakes and they are almost silent and also plenty powerful. (would send over handles if not careful.
@muco2 Жыл бұрын
thank you for guide
@bikevlogadventure3263 Жыл бұрын
Nice...😊
@warlord1333 ай бұрын
My rear brake is leaking the brake fluid , just changed the pads and in 8km they were oily again together with brake disc , i disassembled the rear brake and now i m searching for instruction how to overhaul it so it doesnt leak
@lonerbikes2 ай бұрын
.
@silasteacher Жыл бұрын
What is the purpose of the thread glue?
@lonerbikes Жыл бұрын
Prevent protection against spontaneous unscrewing and loosening of screws due to vibration
@silasteacher Жыл бұрын
@@lonerbikes thanks
@curiousKID.2 жыл бұрын
Hi, can I use j03a brake pads on mt200? thanks
@lonerbikes2 жыл бұрын
If it is the same shape but remember to use recommended pads for you brake disc (organic,semimetalic,metalic, etc)