How to change spark plugs 2010-2017 Ford Fusion Hybrid Step by Step easy DIY No special tools

[@damiandelaiglesia1927]

When you remove a spark plug, always use a vacuum cleaner hose to remove debri from the spark plug tube before installing a new plug. Chunks of carbon buildup can drop into the cylinder chamber. If you don't, you may end up damaging the engine somewhat. A chunk may get trapped on a valve, making the valve not close correctly. Inspect the hole with a flashlight to make sure debri has not fallen on the flange where the new spark plug washer will sit. You need the hole as clean as possible.

[@SuAmigoElilegal]

Come on lol by the time u pull out that old spark plug debris already when down the whole

[@damiandelaiglesia1927]

@@SuAmigoElilegal I don't understand your comment. Hence, that is why you use a vacuum cleaner. I have a rubber hose the size of the plug tube and I attach it to the vacuum hose. I go all the way down the hole. Do what you please, I'm only trying to help.

[@paulsemeraro]

Thanks for this video! What were the torque spec numbers for the spark plugs? ( thanks )

[@KemonSleng]

Following this video and fords website it can be between 7-15lbs. I ended up doing 12

[@jeffreybrowne7950]

you did a great job... except you did not tell what cylinder was what. big goof

[@hadherramadhanmohammed3699]

thank you

[@IsmailStonewall]

Thanks bro

[@chehuicho]

and dielectric grease?

[@damiandelaiglesia1927]

Never

[@B_e_n_B_r_e_w_e_r_18]

Wd-40

[@damiandelaiglesia1927]

@@B_e_n_B_r_e_w_e_r_18 Nope. Just install them dry.

[@UberDriverChat]

Stop watching after two minutes… Was the video about changing the spark plugs or about that new impact driver you got?

[@theepattybee]

Schweet!!