How To Change Spark Plugs On 2007 Ford Fusion 2.3L

How to perform a tune-up / change spark plugs on a Ford Fusion 2.3L 4-Cylinder Engine. Dealer quoted $200 for this same job that cost only $15. Spark plugs were approximately $3.64 each x4 = $14.56 saving over $180. Hope this video helps show how easy this job can be and the benefits of doing it yourself! Thanks for watching!
Everything used in the video to complete this job.
Link to New Spark Plugs -
amzn.to/3jDqyd7
Link to Medium 3/8 Drive Ratchet -
amzn.to/3YSMcKl
Link to 3/8 Drive Extensions -
amzn.to/3C8Ihzm
Link to 3/8 Drive Spark Plug Socket -
amzn.to/3jDi6KV
Link to Dielectric Grease -
amzn.to/3G4pZ3k
Link to Anti Seize -
amzn.to/3C3LtMr
Link to 8mm Socket -
amzn.to/3Wtu0Fu
Link to 10mm Socket -
amzn.to/3I8YW9D
Link to Spark Plug Gap Tool -
amzn.to/3GpK5GJ

[@SwanCanFixIt]

Everything used in the video to complete this job. Link to New Spark Plugs - amzn.to/3jDqyd7 Link to Medium 3/8 Drive Ratchet - amzn.to/3YSMcKl Link to 3/8 Drive Extensions - amzn.to/3C8Ihzm Link to 3/8 Drive Spark Plug Socket - amzn.to/3jDi6KV Link to Dielectric Grease - amzn.to/3G4pZ3k Link to Anti Seize - amzn.to/3C3LtMr Link to 8mm Socket - amzn.to/3Wtu0Fu Link to 10mm Socket - amzn.to/3I8YW9D Link to Spark Plug Gap Tool - amzn.to/3GpK5GJ

[@dallasschloesser2436]

I like that you begin your videos by showing the tools and parts used.

[@SwanCanFixIt]

Thanks for the feedback. Took everything that I’ve wanted to see in a “how to video” and tried my best to implement into my videos. Hate when KZbin videos talk and show to much about unrelated stuff

[@IKC-Highlander]

I second Dallas, very methodical well done.

[@ricardomendoza8309]

Thanks, very helpful video.

[@Bakokid]

Great video. About to do this.

[@slaproductions4]

Great video

[@freerell]

I have a 2007 ford fusion gonna change the plugs on my day off ty.

[@connorredman1404]

Well they charge way too much at a shop for this. Glad I came and got on KZbin I’ll be doing it myself just like everything els

[@Riseupandwalkintministries]

Seems pretty easy

[@gratefulnotdeadhead7857]

Did you replace the boots within the plug well?

[@9mmamba388]

Wait weren’t you supposed to take the white plastic @ the bottom of the née one

[@Superdudehatesmilk]

What did you use to degrease the engine?

[@SwanCanFixIt]

I used the Gunk engine degreaser that you can buy at Walmart or any local auto parts store

[@nickkkyss7634]

What would happen if you don’t lube the plugs before going in ?

[@chrisbacha5725]

Never go in dry kiddo

[@dharmabum4201]

Fell asleep half way through

[@SwanCanFixIt]

Good video to throw on for bed 🥱😴