How to change the Chuck on a makita cordless drill.

[@DaveNewman-y7r]

I tried this solution and others on KZbin that use a hammer instead of their sense. My solution was to remove the left hand screw as shown, but know that this may take 2 people, one to press down on the screwdriver and the other to turn it clockwise to loosen. Next, instead of hammering on an allen key, use a hammer drill. I tried the beat on it method for 2 days and got nowhere and was making a mess of my drill body. I realized that the solution was torque and what better than a hammer drill to provide that. I cut off the L end of the allen key and inserted it in both chucks. Se the hammer drill to run in reverse and gave it a couple of shots on the trigger and the Makita chuck spun right off. Moral, don't use a hammer, use your head. Thanks!

[@taz3383]

Cannot get the chuck off , removed the screw put Allen key in hit with a hammer but would not unscrew any tips please

[@deandohertygreaser]

Grinder, cut it of.

[@ccsinstalacoeseletricas8191]

​@@deandohertygreaserLMAO

[@stauker.1960]

I keep seeing videos on repairing Makita tools. Not many on Hilti tools. Is there a reason for that?

[@МурадТагиров-ц4о]

The reason is that Makita is sold several times more than Hilti. Hilti is repaired only by themselves.

[@deandohertygreaser]

Hilti tools are a lot more reliable. They are the top brand. Newer tools didn't normaly need repair. And when they do, hilti has a good warrenty and fleet cover. Outside of warrenty, very few people will take on repairing them. I would mainly repair older hilti hammers myself.

[@robertrada4783]

Bear in mind that outside of breakers most of the Hilti tools out in the wild are effectively on loan for a monthly fee.

[@paulmcgeoch2603]

Nice job,do u CHUCK the damaged one away lol

[@kspower395]

the method demonstrated as recommended by Jacobs over 30yrs ago. removing the screw is simple with hand impact driver or drill out if damaged . Cutting an "allen" hex wrench sense would be use the straight bit key kit with 3/8 or 1/2inch sq adaptor like i did 30yrs ago with air impact wrench, remember only on low power setting or may strip out gear box that`s why shocking with hammer as demonstrated should be tried first a few goes.

[@bluemantom77]

How you doing a good day from over in the US want to throw a name title for your video out there how to change a drill chuck the easy way helping each other out have a good day

[@robertrada4783]

Replacing chucks is progressively becoming a nightmare with the newest stuff.

[@ccsinstalacoeseletricas8191]

I got one of these dhp 453 drills, it's strong. But i bought a cheap small Chinese drill with 40nm FortG 3014x. Its incredibly strong and my Makita couldn't keep up with it at drilling and driving screws. I'm so disappointed

[@patterdalezipsuzilil]

Man just been trying get that screw out for an hour 😂😂😂is it left hand thread did u say

[@deandohertygreaser]

yes reverse thread. sometimes they just wont come of and you have to cut the chuck off

[@NewcastleParkourOZ]

@@deandohertygreaserI’ve tried getting the screw out of my DHP486 (turning right) and it’s just not budging. Tried with a screwdriver and then my DTD170 impact driver. I think the screw head is now stuffed. Do you have a video on cutting off the old chuck? I just want to get it right the first time.