How To Change The Entry Delay Time Honeywell Security Alarm System Easy Simple

Quick video on how to change the entry delay on your Honeywell security system. Please use extra caution when in programming, you CAN EASILY mess up your programming and will be calling a professional to come out and fix it for you.
Recommend using a 6160, 6164, or a touch screen or other Alpha Numeric keypad for programming. This is for experienced users and messing in programming can mess up your system and you will be calling a professional to fix if not. I charge extra personally for "self programers" and most of the companies I know in the area do the same, so use caution and again if in doubt call someone.
I did a series of short videos on how to do some user interface on a Honeywell security system. This will work with most Honeywell systems including the Vista 10p, 15p, 20p, 21p Lynx 5000, 5100, 7000, 7100 and other models. Most of the Honeywell Keypads 6148, 6150, 6152, 6160, 6162, 6150rf, 6160rf 5828 and many more all have the same buttons but the displays are different. The 6160rf Keypad I'm using will work on all the Vista series panels and can be picked up on Amazon for around 100.00 and is easy to upgrade. There are only 4 wires and all the main programming is stored in the Vista itself and not the keypad. Please check with your security provider if you have any questions, these videos are for information purposes only but my primary business is Residential Security.
IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
Supports four graphic touchscreen keypads
Wireless keys can be programmed without using zones
Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
- 40 hardwire expansion zones
- 40 wireless expansion zones
Two low current on-board trigger outputs
100 Event Log viewable at system keypads with time/date stamp
48 system user codes assignable to either partition
Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
Two independent partitions plus a common partition
- Global Arming from any system keypad
- Go to function to view or operate one partition from the other
- Separate partition account numbers
16 output devices
- Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
Supports four-wire and up to 16 two-wire smokes
- Works with Sentrol CleanMe™ maintenance signal
Multiple actions on output devices depending on system state
- Turns lights off when system arms
- Turns the same light on when system disarms
- Flashes same lights when system is in alarm
Built-in phone line cut monitor with programmable delay and annunciation options
- Display on system keypads
- Trigger local sounders
- Trigger system bell
Security Dealer Features
Automatic System Load Shed
- During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
Dynamic Signaling
- Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio
Valuable End-User Features
Viewable on system keypads:
- Exit countdown
- Time and date display*
- Event log*
Auto keypad backlighting on entry
Keyswitch arming
Programmable macro buttons and single-button arming
Supports a variety of wireless remote controls for single-button operation
User Scheduling
- Latchkey reports to pagers
- Auto arm/disarm
- “User access” time windows
VIP Module allows system control from any touchtone phone
Chime by zone
*Requires custom alpha keypad

[@mrsheehy9896]

Thank you!

[@safesoundsystemsinc2005]

Glad it helped thanks for watching and dropping a comment.