How to change the knives of a hand held planer

How to change the handheld planer knives and how to set them so they are aligned with the planer fixed base. Now my planer is easier to use and after planing I a get perfect wood surface from the beginning to the end. I take away the knives holder and I install new planer blades.

[@vinmaratty7449]

This is the best video to learn about changing and adjusting planer blades. Thanks!!!

[@cpascoal2000]

The best explanation I saw about adjusting the blades. Thank you.

[@carolschumpert4647]

This is the one video that showed & explained step by step how to do it myself rather than "go buy another one" thank you for your patients & sharing your knowledge, as a newbie to wood working you are one of the few that I garner great knowledge of the trade from thank you for all you do & keep up the great content. Thank you

[@aisoutube]

After all these years you keep helping people with this vídeo, thx!👏🏻👏🏻👏🏻🙌🏼

[@runninghead_media]

The best and most comprehensive guide to the job available in video, thank you for making this!

[@johnpowell6386]

Very clear and easy to follow thank you very much

[@PaulC1980]

Best video I've found on this subject. Masterclass. Thank You.

[@debashisbarik7267]

Thank you so much So grateful knowledge share Good job Love from India ❤️

[@thomasmiletich2249]

Thank you. Best instructional video I have seen yet. I'm going to change my blades.

[@domainmojo2162]

Best vid I've seen on how to change the blades! Thanks Serge!

[@oficinadocristovam9425]

Best KZbin video about this BlackDecker planer 👍👍👏👏 very good I had a problem with the blade angles and it was causing a terrible noise and tremor You won one more I am a Brazilian from Recife 😎👍👏

[@howardbaker8618]

Brilliant video. How many times have i struggled to do this. This Video shows me exactly with the pitfalls. Thanks

[@racerroy1]

Excellent instructions, thanks for sharing.

[@spreader27]

Precise and straight to the point, very informative video, well done...

[@JD-cf3mv]

Sergio. Great tutorial. I have exactly same system on my planer and had tried to change the knifes but ran into problems but after watching your video i can now change. Many thanks.

[@altomar718]

I was struggling to get the knife blades to the right height, but now I know - Thanks for the help

[@ryanharris6098]

Thank you. I have been searching for hours on how to adjust the height on this type of router.

[@alistercarmichael4990]

Excellent. Clear and simple explanation for planes with this type of holder. If you only turn out the middle bolt it makes leveling the blades easier as there is only one part to loosen if needed. Then verify the height after securing everything. Good work though.

[@stephemsley9781]

Feel like a right idiot. My planer blades were damaged and thought to throw it out and buy another as I couldn't find how to repair. Years later and still not throwing it out, you spoke of double sided blades. I've just checked after struggling to plane the bottom of a door, and I've just found 2 new blade edges tucked away in the head! Just going to grab my tool box to turn them around! Thankyou ever so much! Small things like this BIG realization cheers me up no end! THANK YOU!!!!

[@WoodworkingwithDIYtools]

It would be great if we could turn all the blades in all woodworking tools, like in planer knives 😁

[@Shaftmonde]

Thank you, very good clear instructions. I used a small piece of plate glass myself to line the blade with the base plate, but now I think your piece of wood may be better.

[@patrickoptimist8646]

Bravo. It's getting harder every day to find good instructional videos. Yours is great! Thank you. I have a Porter Cable. Exactly the same type of blade and adjustment. I've spent an hour on Porter Cable's site looking for instruction (starting with the manual). They don't even mention an Allen wrench in their. instructions! (This is typical for PC instructions) You went through step by step on how to replace and then adjust the blades, going back and forth between Allen wrench and open end. Thanks again.

[@jamessang5027]

Excellent detail explanation!

[@tonyhimpact]

I echo what most have said, the clearest most comprehensive video with out over complicating the job

[@oogieboy5874]

Very well done. Precise and to the point!

[@vetgarry2004]

Thank you Sergio,excellent tutorial!

[@virriki627]

Very detailed and informative instructions. Many thanks!

[@kendavidson6755]

Brilliant video thank you the handbook doesn’t give any instructions and I didn’t have any idea how to change the blades

[@EForchetto]

Thank you so much for the clearest explanation yet. The instructions that came with my Kraft Tech K-3600T (a very similar machine to yours) were frankly crap...

[@KletosMinistries]

Thank you for making this helpful tutorial.

[@johnfisher1532]

Excellent video very well explained...thanks for sharing

[@colinpamplin9976]

Thanks for a very good video, just the information I was looking for. I learned a lot and it will now save my 2002 FERM planer from going in the recycle rubbish bin

[@beardedwoodpecker]

Great video helped me a lot Full view and Like All the best Yiannis (Athens Greece)

[@WoodworkingwithDIYtools]

Thank you very much and thanks for watching 😀

[@JCB57]

Thank You for this video, what a great help!

[@marcogiai-coletti354]

Thank you for the good explanation.

[@user-xt4hr1ji6u]

Thank you. Very clear and concise.

[@TheSmartodd]

Thank you very much for posting - big help

[@tomruark1839]

Great video. Thank you for making it.

[@keithsykes9401]

Perfect explanation, just what I was looking for. 5* thank you

[@vimarsouza1580]

Thank you, so much! Clearly explained!!

[@ivandavis721]

Thank you, very helpful.

[@dirkatuan]

Great and informative video .

[@docs3391]

Well done! Thanks.

[@STATIONBUDAYASALURANBUDAYA]

The best oroduct black decker nice

[@ashy1423]

Thank you for sharing👍

[@nawavlogspot]

Good video sharing, thanks

[@lucjanwilczewski824]

Really useful video, thx.

[@JimBeshears]

Thanks Sergio I have not had to do this yet.

[@JimBeshears]

t is funny you say that, I am working on a metal detector for a planer now in my shop.

[@michaelurciuoli7899]

Thank you .well done

[@MrPod15]

Thank you so much!

[@hemkholalkipgen]

Very much usefull to me

[@Bu76ahmed]

Thank you very much

[@fritzkygravity9718]

is this standard blade or universal blade for different brand of planer

[@adelaideinvigilation5230]

Ah you make it look so easy.

[@hansdegroot8549]

"Everything" is easy, when you know how to do it :-) Perfect tutorial (I think that most hand held electric planers have more or less the same system). Thanks for sharing.

[@Laffy1345]

Sergio Acuña Padin KZbin probably has a video how to adjust height I'm sure. Good video thank you

[@daheath7242]

Lifesaver thankyou.

[@WoodworkingwithDIYtools]

👍 Thanks for watching 😃

[@adelismail6403]

good job sir

[@jhonatannatal4931]

Olá muito obrigado foi de muita valia

[@abelinolopez1957]

Thank you

[@armandosanarez8275]

Pls have a video on how to sharpen knifes of planer with smaller blades

[@luisadrianomeusparabens6863]

parabéns gostei

[@paulgribbon2837]

Thanks a lot. The blades on mine would not pop out easily. Had to tap them out gently with a hammer using a small block of wood in between the hammer and blade to protect the blade. After that no problem. Didn't adjust the screws though - left it at the same height.

[@WoodworkingwithDIYtools]

Thanks for watching Paul. Sure in all brands there is always a trick to take the blades away 😀

[@wallypaty]

Life save thanks

[@chaddamp2894]

thanks !!!

[@joseeloylagemartins5729]

Excelente e simples a didatica

[@WoodworkingwithDIYtools]

Muito obrigado Jose Eloy

[@ricgoodman66]

The blades on my Black & Decker P71-03 has the three fixing bolts but does not have the height adjustment screws and the blade remains +/-0.5mm below the level of the base plate. Could anyone advise on how to adjust them, please?

[@jesieniar]

This is Black&Decker KW712, right?

[@thenmarry]

10 10

[@vagkos3060]

should the knives be like your to use in your homemade thinner planer ?

[@vagkos3060]

are the boards become straight ?

[@iman80skid91]

Can I use this planer to grate my cheese. It looks very good way for making cheese for my bolognese.

[@OrlandoRodriguez-lo2vp]

Mas claro no canta un gallo :) Gracias Bro!

[@mestredacriatividade943]

Traduz em português para eu entender

[@irekkapaa6214]

Prosto i na temat. Oto chodziło

[@colindowson1737]

It is possible to change blades without removing the blade carrier so there should be no need to touch the blade height adjusting screws. I just slackened off the three pinch bolts and tap out the old blade.

[@jaydenmonkley8767]

That's correct. The blades can be changed without removing the carrier, I think he was just demonstrating how to clean underneath it if need be.

[@royalstonenongkhlaw6985]

Name of this planner please

[@jesterraj]

i keep makin a bow in wood after planning

[@azadarehusain2460]

Can we get in india 🇮🇳

[@milovannestorovic5645]

brišu ovaj grupi oglas

[@maurocezarcamargocamargo4889]

Nao acha. Dessa. Lamina. Quando. E. Cara

[@4WorldPeace2]

Very helpful, thank you.