How To Change The Oil 2022 Honda CB 500 X / Step-By-Step

[@Maxsmotoshop]

Oil Filter: amzn.to/3Zx3ps5 Oil Filter Tool: amzn.to/40TLugj

[@phildivalerio]

Excellent. One additional suggestion ... some paper or plastic under your oil pan to keep things nice and tidy 🙂

[@Maxsmotoshop]

👍

[@jamessouthworth1699]

Thank you for taking the time to make this video. I'm a little disappointed that Honda now outsources their filters from China. If I get one of these bikes I won't be using an OEM filter. I can only hope they don't outsource any critical parts on the bike from China.

[@Maxsmotoshop]

You seem to be misunderstanding China is perfectly capable of making quality products. It all depends on the company paying them to do so.

[@milosevicgorann]

Dear, I would greatly appreciate it if you could explain to me the reduced power of the HondaCB500X. It should have 35kw, but mine has 25kw. This is what is written in the traffic license. The motorcycle was bought used in Switzerland. What is the mechanical procedure of restoring 35KW??? Thank you.

[@krhystianjoseguillermoloch5560]

Hello, did you have a video abour the Major 8k miles maintenance for this MOTORCYCLE?

[@mikewilliams8311]

You didn’t need to pull the rear center stand stay and lower the Rally Raid plate to drain the oil? I’m getting ready to do my first oil change and figured I’d have to remove the rear stay to get to everything. Did it coat the bash plate with oil when it drained?

[@Maxsmotoshop]

No I did not let the skid plate down at all I did get some oil on the skid plate and just gave it a quick spray with the brake clean and airline to clean it off after

[@pnest]

you should first the remove the oil filter and then put back the drain plug, you will notice that more old oil will drain.

[@paulyflyer8154]

Love the tyres. What are they?

[@Maxsmotoshop]

They are the Mitas E 07+ tires check out my first 5 mods video for more info kzbin.info/www/bejne/qnbEc5qZmZaXbM0

[@peebeeking3587]

@@Maxsmotoshop Hello but I can not find 160/60-17 size for rear wheel only a 170 /60 17 B 72T TL M+S

[@ronalvey103]

Call me crazy, but I think you would want to show folks which nut is the "drain plug". There are folks who are not mechanically inclined and maybe doing this for the first time.

[@Maxsmotoshop]

Well, I guess you were not paying attention. Maybe try watching again.

[@JohnDoe-xr5is]

What's the mm measurement of the filter removing tool/socket?

[@Maxsmotoshop]

Oil Filter: amzn.to/3Zx3ps5 Oil Filter Tool: amzn.to/40TLugj

[@azeriadventuremotorcycleto3528]

Which oil filter did you use?

[@Maxsmotoshop]

The part number for the oil filter is in the description

[@Omni.Trix93]

how many miles before you oil change?

[@Maxsmotoshop]

The service manual says the first oil change is 1000 km after that it is every 10,000 km but I prefer to do it about every five or 6000 km the service manual also says the air filter is good until 19,000 km but I would definitely replace it at 10,000

[@ben54322]

Don't need to use crush washer?

[@Maxsmotoshop]

I reused the original Washer can be used 2 to 3 times.

[@abigailvella1257]

Hi the link is not for the same honda oil filter shown in the video

[@Maxsmotoshop]

Correct the exact Honda filter is hard to find on the Internet. The link is for another high-quality filter made for this machine.

[@dimosthenismagos7982]

You must invest in a center stand. Your work will be much more comfortable.

[@Maxsmotoshop]

I went with the rally raid skid plate instead, I need proper protection along the bottom of the motor

[@mxttstrxfe]

Im 6'3" do you think I'd be able to ride one of theses fairly comfortably? Most of my height is in my legs

[@Maxsmotoshop]

I’m sure it would be OK you might be just a little on the tall side for the bike but there are lower foot pegs available

[@mxttstrxfe]

@@Maxsmotoshop thanks ill look into that if I end up getting this one

[@Katherine-15-12]

Great bike

[@chuckwick1606]

Thanks bro

[@Maxsmotoshop]

Glad I could help

[@tomg6284]

Today I ordered my CB500X. Looks like 3 months away? Honda get back to work..

[@Maxsmotoshop]

Make sure you do your part stand up and say no to vaccines

[@carelhaasbroek1575]

Why Do you talk Like that

[@eQui253]

22 foot pounds? sad isaac newton noises .. oh you americans..

[@Maxsmotoshop]

I just read the service manual take it up with Japan👍

[@BudgetTechUKYT]

​@@Maxsmotoshop😂😂😂😂🎉🎉🎉

[@infinitydreamzz]

You think that's crazy? They use cubic inches to measure engine displacement haha 😂 And btw both Americans and British are guilty of using antiquated imperial units

[@fixento]

I cannot believe that you used your ratchet to start the treads on the drain plug. The oil filter should have been torqued at 19 ft lbs not a quarter of a turn. Read the manual before you make your next video.

[@Maxsmotoshop]

I’ve been a mechanic for 10 years now and I am very good at what I do and have a lot of experience. You read the manual they are for people that have no clue👍

[@swingingforgold5743]

DO NOT torque the oil filter on it will seize and even the proper tool will crush the filter making it a big problem to remove follow the proper procedure hand tight and 1/8 of a turn with an oil filter tool just like every other mechanic is done with a spin on filter on every other vehicle

[@davidread319]

@@swingingforgold5743 Hi from Australia I've been doing oil changes on trucks tractors cars motor bikes for years and never tighten oil filter more than hand tight never had any leaks or have came loose everyone to there own ways of doing things.

[@Maxsmotoshop]

@@davidread319 thanks for your comment and you are right I have had a problem with oil filters being over tightened even though the customer swears they torqued it properly the oil filter gets crushed and can become quite a problem to get off I’m sure you know