How to change your Cam Chain- Shown with a KX250F

Changing the Cam Chain and Setting Timing on this 2012 KX250F.
How to put a kx250f into Dealer Mode
• How to put a KX250F in...

[@c4r5on88]

Even though I know what I'm doing I really enjoyed watching this :)

[@ThatsKINKY94]

Good video, also to see if you want to double check to see if the piston is at TDC is check the key way on the crank if the key way on th crank is facing up then you know you are at TDC.

[@ctone12]

Same for rmz’s?

[@Morleyx99]

Monetize starts with turn off copyright music 😂 nice video !

[@aros007z]

Great instructional video, thanks!

[@joeplaugher6405]

nice bro thanks man 🤘🏻

[@demetriusbeasley151]

Great commentary man. Do these KXF's come without a crank seal on the flywheel side?

[@gohobby9934]

Ack! You skipped the part I wanted to see...using the flywheel puller!

[@aaronsaenz5370]

Bad ass man

[@PHATT13_DADDY]

Would this be the same way i change my 2009 rmz450 timing chain?

[@EuropeanDreamz]

Hey Reid how often would you do a chain and tensioner on a 09 Kx250f ? I got it a month or two ago an it’s just too much of a beast to me not to properly maintain 💪sick video btw

[@EuropeanDreamz]

@@racerreid3036 thanks I’m going to give it a fresh Oem chain and tensioner , these engines normally super noisy ?

[@piky635]

hey man i have few questions, how much play should the cam chain have (side to side)? does it constantly have same tension throughout the whole cycle? mine feels like when piston is going down it is loose, when it is at top dead center it is very tight with little to none slack. could it be reason my bike stalls at idle after like 30-60 seconds? i have kx250f 2012 and my fuel injection is working normally

[@piky635]

@@racerreid3036 thank you ill try the injectors later! i did the diagnostics and it shows that temperature sensor is bad (one long, 4 short) could it be that the engine cuts the fuel to the engine to protect it? because it don't know what temperature the motor has

[@yaseenamin8056]

I did the same thing but my piston is still hitting the valves any help on what I should do just trying to figure it out so I dont have to go to a mechanic and it is an 06 kx250f

[@mrrecliner7675]

Do you always wanna push the cam chain tensioner piece all the way back?

[@nickbroyles6584]

Just curious, why didn't you replace the guides? I'm about to replace my chain and figured it'd be best to replace the guides with it but maybe not needed? Also, do you recommend oem or aftermarket chain? Will an aftermarket chain fit the oem cam sprocket teeth?

[@1979pmiller]

I ordered a aftermarket chain and head gasket online. Chain Entirely too tight, head gasket was faulty also. I had to go to dealership to get both parts. I don't recommend buying parts online.

[@lukasbrada2458]

Do you need any special tool to get loose nut on flyweel?

[@davidmalacescu4217]

To check only valve clearance, do you need to drain the oil?

[@racerreid3036]

No

[@TheCrazyR1]

How in the hell do I get the cam chain on, I’ve tried everything

[@1979pmiller]

Tilt cams towards you.

[@johnneitzert2382]

Why does it sound like it have tensioner noise

[@inimeg9999]

So this noise is normal by kawasaki? I also hear that noise on mine 250f and i thought that something is wrong.

[@mr.grillo3385]

@@inimeg9999 same here. It's normal

[@mxfam6700]

Soooooooo how do you actually install the chain lol

[@leighstonier1897]

irritating music in the background. was getting on my nerves so couldn't watch the video.

[@devinbarnes2192]

Commie