Very helpful tips on dealing with the rear pulley. Thanks.
@MNDashcam4 жыл бұрын
Happy to help!
@renniegarrick70593 жыл бұрын
@@MNDashcam qqqq
@andrewarmstrong10172 жыл бұрын
Excellent...clearly explained...my little honda vision 50cc..was making a awful noise...thinking its the belt...may attempt it myself as ive spent a small fortune on the little Honda Vision 50cc (1987)originally bought for my wife 😉
@radconserv686 жыл бұрын
Thanks for posting. I have the very same setup on my "BD50QT". I am up and running!!
@budski13662 жыл бұрын
Saw alot of videos but yours is the best and the squeeze the belt is the by far best method thanks alot
@MNDashcam2 жыл бұрын
Glad it helped!
@bigkev5505 жыл бұрын
Thank Christ for the video , didn't know what the small cog was at back of flywheel , I now know it's the starter ,
@alien_man16695 жыл бұрын
BTW that's not the flywheel its the variator/front pully. The flywheel has the coils on the other side
@aquariansith67634 жыл бұрын
Thanks , just used your video to fix my Son's Valero . . On the road again . . . .
@MNDashcam4 жыл бұрын
Happy to help!
@Trance887 жыл бұрын
Fantastic video! I learned a lot from watching this.
@chrisw42153 жыл бұрын
Fantastic tutorial. Thank you so much!
@MNDashcam3 жыл бұрын
Happy to help! Like and subscribe!
@aarondunn50296 жыл бұрын
thanks pal got a 125cc jet 4 and i can smell burning rubber im shaw my belt needs changeing thanks a bunch
@adamchess45435 жыл бұрын
Excellent job 👍 with this video thanks for the help man!
@deericketts46505 жыл бұрын
This was very useful. Thanks!
@rayvilasuso47172 ай бұрын
Awesome video
@cngogogo5 ай бұрын
Very clear and easy to understand, thank you very much for posting this video lesson
@MNDashcam5 ай бұрын
Glad it was helpful!
@tellmesomething2go7 жыл бұрын
Finally! Some good camera work.
@tellmesomething2go4 жыл бұрын
@@SJ-rc9kg HI. BELT IS WRONG SIZE, OR CLUTCH, OR VARIATOR, MAY BE PROBLEM.
@levineff34847 жыл бұрын
God bless your soul
@barbarawinton7102 Жыл бұрын
Very very good instructions I would love to see more from him on different things.
@RosskillbaneC3 жыл бұрын
Virtually identical to my Lexmoto pulse scout thank you very much I appreciate your upload and time to make this video with your knowledge mate!
@marcusnmasterpotter95696 жыл бұрын
Great video think i found out my problem also subscribed thanks man
@rockstargamer79363 жыл бұрын
Awesome.
@pshivjee3 жыл бұрын
Excellent job 👏
@brianjimmo14742 жыл бұрын
What were numbers on belt n fits 50cc vip bike?, Also limiter on drive end .. worthit I get 4ó 45 consistent I think I got wrong belt w/o teethn seems thin
@christyler20367 жыл бұрын
awesome thanks helped me fix my scooter thanks
@patricksullivan13664 жыл бұрын
Very helpful thank you
@Unknown-hl7sb5 жыл бұрын
My belt broke and I put a new one on, I have great take of, as I got a big bore on it. But it's like on top have the same top speed anymore. Almost feels like my belt is slipping sometime. Like it would of the engine was putting. It engine is running fine tho. I checked my weights too their all good. Bike ran great before the belt broke. Now I just don't have the same top speed :(
@blackeasyrider82872 жыл бұрын
GREAT VIDEO! THANKS!
@jarrett54165 жыл бұрын
My flywheel won’t come off mine any tips to help remove it ?
@barbarawinton7102 Жыл бұрын
He saved me $100 today
@eduardoalvarez50885 жыл бұрын
Nate so I have a Chinese scooter it starts up good stays on but when you accelerate it sound like if it’s on neutral. Scooter doesn’t move at all though
@aquariansith67634 жыл бұрын
Clutch is worn or belt is broken
@lyndalbenner3 ай бұрын
What if you don't have an impact wrench
@MNDashcam3 ай бұрын
Lock up the back wheel and use a breaker bar
@atikashabbir67193 жыл бұрын
Mari sakoti ki belt bar bar toot rahi ha aj 1 hi din 2 bar toot gai ha Ma pakistan sy hun yhn pr sakoti ka koye acha mechanic ni mil raha jis ko es ka problem smhaj aay plz mujy bata den asa kun ho raha ha aur ma kia kron
@Don03G5 жыл бұрын
Someone please help my bendix gear and starter keeps grinding not engaging... ived looked everywhere
@HasanALi-lj7mx6 жыл бұрын
My starter bendix keeps shaking loose, why?
@ARAR1486 жыл бұрын
I’ve owned 11 scooters, my second scooter had the belt brake while I was driving it, good thing I had my dad on his motorcycle with me, I usually ride by myself and I like in the country in Illinois so I go far, with no phone, anyway we had to bring my van to pick up the scooter at a old church in the middle of corn fields.🛵
@lofturhjalmarsson2958 жыл бұрын
belt on my 139qmb seems worn , measured 17 mm or less wide, think it should be 18 mm. can see an exposed plastic thread in the side of belt probably from wear, should be rubber covering that l guess, l read other ways than impact wrench like electric can damage variator. read in a forum ,
@HasanALi-lj7mx6 жыл бұрын
Where do starter bendix bushing go.
@1menwolfpack5505 жыл бұрын
Can I use brake or carb cleaner to clean the clutch ?
@aquariansith67634 жыл бұрын
Yes , the cleaner will evaporate
@WegensPierre4 жыл бұрын
How many belt is in it
@aquariansith67634 жыл бұрын
1
@foodguy5783 жыл бұрын
I installed a new belt and now my tire doesn’t spin when I engage the throttle
@MNDashcam2 жыл бұрын
It broke. Sell it and buy a Fiat.
@crazylostcrazysoul70387 жыл бұрын
I have a honda elite 50s scooter. An i need to buy a timing belt an a pully what size belt do i get an pully
@radconserv686 жыл бұрын
If you're referring to this belt in the video, it's not a "timing belt", more like a "drive belt". Google the type of scooter you have and what belt it needs. Or, look at the broken belt and get the number off of that.
@mattjones5449 Жыл бұрын
14:30 "There's no specific direction to orient them " proceeds to Orient the Three notches in the Grooves of the Variator Fan, Kickstarter Pawl Notches facing out.... 😑
@lonestarwolf612 жыл бұрын
the nuts on my MVP scooter must have been welded on
@MNDashcam2 жыл бұрын
Probably need an impact to get it loose
@lonestarwolf612 жыл бұрын
@@MNDashcam yes and that costs $400.00 plus dollars thanks any way I'm on a buget belts on a scooter is a bad idea any way they need to put a lock pin to freeze wheel so you don't need special tools
@MNDashcam2 жыл бұрын
You can put a metal bar in the rim and lock the wheel enough to get the bolt loose.
@tadlysne12736 жыл бұрын
Where do you find a belt like this
@radconserv686 жыл бұрын
If you're referring to this belt in the video, it's not a "timing belt", more like a "drive belt". Google the type of scooter you have and what belt it needs. Or, look at the broken belt and get the number off of that.
@williamhaskellhaskell3162 Жыл бұрын
Never pinch the belt on front vari. More belt slack is needed ! Poor tech
@spazsi3838 Жыл бұрын
Why made of rubber
@cizziebambino29374 жыл бұрын
I can not get those last two bolts off to save my life
@micahtonsing68453 жыл бұрын
I know righttttttttttttt!!
@LouieGrind8 жыл бұрын
Can you do this without an impact gun?
@MNDashcam8 жыл бұрын
yes. just lock up the rear tire by putting a block of wood or hammer handle or something through the rim. then spin off like a regular bolt.
@LouieGrind8 жыл бұрын
Thanks man! Does this method work for the front cog as well?
@MNDashcam8 жыл бұрын
for the crankshaft on the front of the belt? it sometimes does but careful not to damage the engine. it's better to lock it up and pound on the breaker bar so it has a similar effect as an impact rather than just try to bust it loose and possibly damage your engine.
@radconserv686 жыл бұрын
I couldn't do it. I tried.
@radconserv686 жыл бұрын
For the front cog, you're just turning the engine over. I really think an impact wrench is necessary.
@janisalo38936 жыл бұрын
does someone know how long belt i need in Peugeot vivacity 50cc skootter
@radconserv686 жыл бұрын
google it!!
@aquariansith67634 жыл бұрын
you would be better off just going to the local cycle shop and tell them the scooter you have they will help you with the right belt
@lonestarwolf612 жыл бұрын
I did that and didn't work thanks anyway had to ask my friend for help thanks anyway
@MNDashcam2 жыл бұрын
Sorry to hear that
@lonestarwolf612 жыл бұрын
why does everyone lie I don't understand
@MNDashcam2 жыл бұрын
Lie about what?
@lonestarwolf612 жыл бұрын
@@MNDashcam everybody says its easy but its not the nuts are lock on or welded with lock tight etc. you need to pay somebody hundred dollars and hour to do repair that's not fair
@MNDashcam2 жыл бұрын
That isn't quite right. I bet if you took it to a shop and just asked them to loosen the nut really nicely they would probably do it for free.