Nice video only suggestion would be to show or provide tips on how to remove the bearings without a press and how to insert them. The answer? You can use a torch to heat the outside of the hub housing. This will expand the hub bearing diameter just a tab and make it much easier to hammer out with a brass punch or properly sized punch. Then you can place your new bearings in the freezer overnight and they will basically drop into place. Freezing them shrinks them ever so slightly.
@Twfish134 жыл бұрын
Honestly if you have a torch you should have a press....
@richardharris20623 жыл бұрын
@@Twfish13 my
@RetiredAtenPilot Жыл бұрын
Or,,,, You can just make your own video?
@marshallgerston48097 ай бұрын
This (and she) is fantastic. Thanks for the content. Wheel bearing replacement in my future. Appreciate the video.
@SuperATVMedia7 ай бұрын
Glad we could help!
@williamlloyd8542 жыл бұрын
A hottie at my fav part supplier.
@kevinbargholz71562 жыл бұрын
my hub must be glued on there, aint slidding off thats for sure
@catlinbeasley20413 жыл бұрын
Most of these people know less than you so keep it up!
@coolmountaineer Жыл бұрын
Kristen, that winking session at 1:39 is very flirty....lol Joking, good video!
@SuperATVMedia Жыл бұрын
Thanks for the feedback!
@bsebldude Жыл бұрын
what size socket is needed to remove the axle nuts front and rear on a 2018 rzr xp 4 1000?
@garygartside52809 ай бұрын
Dumb ass, figure it out
@tbramich3 жыл бұрын
Mine has never come apart that easy...lol
@thomasburger58104 жыл бұрын
You should specify the year because on my 2017 the snap ring is on the inside and the bearing comes out and goes in the exact opposite of your video.
@catlinbeasley20413 жыл бұрын
People that can’t tell the difference shouldn’t touch tools
@beardedwulverine Жыл бұрын
Yeah, that was confusing. 😅
@michaelmilkovich41203 жыл бұрын
what size are the correct adapters?
@garpathen100 Жыл бұрын
I really like that know one pointed out….the importance of make sure that the caliber is hanging from its hose😆
@joemeier6595 жыл бұрын
on the instructions, it says to apply Loctite 603 retaining compound to the outside surface. Is that mandatory or not?
@SuperATVMedia4 жыл бұрын
No its not mandatory just recommended.
@zaclecheminant84212 жыл бұрын
@@SuperATVMedia tell that to the 2020 pro that they forgot to apply the loctite during assembly and now my bearings pop
@mr.hoonigan43132 жыл бұрын
Overall labor hrs for rear?
@DomDavidson2 жыл бұрын
As long as you take. If you have had 6 beers it might take longer
@denseleit4 жыл бұрын
I wouldn't be working in with ring on lol
@beardedwulverine Жыл бұрын
Just wish there were torque specs for reassembly. Otherwise, good video.
@SuperATVMedia Жыл бұрын
Sorry about that. You can find all torque specs in the machine's owner's manual.
@wimoe6596 Жыл бұрын
What mechanic wears a 4K diamond while working?
@SuperATVMedia Жыл бұрын
Kristen actually wore hers for years, but finally switched to silicone bands after a few too many encounters with grease and old oil!
@polarisrepair11784 жыл бұрын
Wowwwww😍😍🙏🙏
@rawbdiggity2 жыл бұрын
And of course my race came off on hub
@w1646 Жыл бұрын
Mine too. So I just bolted it all right back up and pretended that I never tried to change them in the first place. Fingers crossed
@alt987421 күн бұрын
Great video...just leave out the annoying background music in future please.
@SuperATVMedia13 күн бұрын
Thanks for watching!
@samrobinson18515 жыл бұрын
Wait a minute!! What was she working on!!!!!!?😁👀
@SuperATVMedia4 жыл бұрын
A 2014 Polaris RZR Xp 1000
@tgw69914 жыл бұрын
Great video but she forgot to grease it
@trubio284 жыл бұрын
It's a sealed bearing, doesn't require grease
@jasonbell46702 жыл бұрын
@@trubio28 why does Polaris sell a specific wheel bearing grease insert for wheel bearings?
@travelintoolboxmobilemecha21652 жыл бұрын
@@jasonbell4670 it forces grease through the center of the bearing, but generally you do not grease a sealed bearing, you just replace them. But I bought one and used it on mine, they do work, but when the old grease pushes out. It ruins the seal
@jared72114 жыл бұрын
wtf you mean you can't leave the wheel on when replacing bearings. Mind blown.
@SuperATVMedia4 жыл бұрын
Confused with your comment, please elaborate. You can't remove the steering knuckle to replace the wheel bearing with the wheel/tire on...
@jared72114 жыл бұрын
@@SuperATVMedia I was being sarcastic.
@HHI4552 жыл бұрын
You also cant remove the bearing with the snap ring in. Are we going to point out everything that must be done again just to verify what was said in the video. Not real funny just a waste of others time!